include/configs/tbs2910.h

   1 /*
   2  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * Configuration settings for the TBS2910 MatrixARM board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __TBS2910_CONFIG_H
  10 #define __TBS2910_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 /* General configuration */
  15 #define CONFIG_SYS_THUMB_BUILD
  16
  17 #define CONFIG_MACH_TYPE                3980
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20
  21 #define CONFIG_SYS_PROMPT               "Matrix U-Boot> "
  22 #define CONFIG_SYS_HZ                   1000
  23
  24 /* Physical Memory Map */
  25 #define CONFIG_NR_DRAM_BANKS            1
  26 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  27
  28 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  29 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  30 #define CONFIG_SYS_INIT_SP_OFFSET \
  31         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  32 #define CONFIG_SYS_INIT_SP_ADDR \
  33         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  34
  35 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  36
  37 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  38 #define CONFIG_SYS_MEMTEST_END \
  39         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  40
  41 #define CONFIG_SYS_BOOTMAPSZ            0x6C000000
  42
  43 /* Serial console */
  44 #define CONFIG_MXC_UART
  45 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  46 #define CONFIG_BAUDRATE                 115200
  47
  48 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  49 #define CONFIG_CONSOLE_MUX
  50 #define CONFIG_CONS_INDEX               1
  51
  52 /* *** Command definition *** */
  53 #define CONFIG_CMD_BMODE
  54 #define CONFIG_CMD_SETEXPR
  55 #define CONFIG_CMD_MEMTEST
  56 #define CONFIG_CMD_TIME
  57
  58 /* Filesystems / image support */
  59 #define CONFIG_EFI_PARTITION
  60 #define CONFIG_FIT
  61
  62 /* MMC */
  63 #define CONFIG_FSL_ESDHC
  64 #define CONFIG_FSL_USDHC
  65 #define CONFIG_SYS_FSL_USDHC_NUM        3
  66 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  67
  68 #define CONFIG_MMC
  69 #define CONFIG_CMD_MMC
  70 #define CONFIG_GENERIC_MMC
  71 #define CONFIG_SUPPORT_EMMC_BOOT
  72 #define CONFIG_BOUNCE_BUFFER
  73
  74 /* Ethernet */
  75 #define CONFIG_FEC_MXC
  76 #define CONFIG_CMD_PING
  77 #define CONFIG_CMD_DHCP
  78 #define CONFIG_CMD_MII
  79 #define CONFIG_CMD_NET
  80 #define CONFIG_FEC_MXC
  81 #define CONFIG_MII
  82 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  83 #define CONFIG_FEC_XCV_TYPE             RGMII
  84 #define CONFIG_ETHPRIME                 "FEC"
  85 #define CONFIG_FEC_MXC_PHYADDR          4
  86 #define CONFIG_PHYLIB
  87 #define CONFIG_PHY_ATHEROS
  88
  89 /* Framebuffer */
  90 #define CONFIG_VIDEO
  91 #ifdef CONFIG_VIDEO
  92 #define CONFIG_VIDEO_IPUV3
  93 #define CONFIG_IPUV3_CLK                260000000
  94 #define CONFIG_CFB_CONSOLE
  95 #define CONFIG_CFB_CONSOLE_ANSI
  96 #define CONFIG_VIDEO_SW_CURSOR
  97 #define CONFIG_VGA_AS_SINGLE_DEVICE
  98 #define CONFIG_VIDEO_BMP_RLE8
  99 #define CONFIG_IMX_HDMI
 100 #define CONFIG_IMX_VIDEO_SKIP
 101 #define CONFIG_CMD_HDMIDETECT
 102 #endif
 103
 104 /* PCI */
 105 #define CONFIG_CMD_PCI
 106 #ifdef CONFIG_CMD_PCI
 107 #define CONFIG_PCI
 108 #define CONFIG_PCI_PNP
 109 #define CONFIG_PCI_SCAN_SHOW
 110 #define CONFIG_PCIE_IMX
 111 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 112 #endif
 113
 114 /* SATA */
 115 #define CONFIG_CMD_SATA
 116 #ifdef CONFIG_CMD_SATA
 117 #define CONFIG_DWC_AHSATA
 118 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 119 #define CONFIG_DWC_AHSATA_PORT_ID       0
 120 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 121 #define CONFIG_LBA48
 122 #define CONFIG_LIBATA
 123 #endif
 124
 125 /* USB */
 126 #define CONFIG_CMD_USB
 127 #ifdef CONFIG_CMD_USB
 128 #define CONFIG_USB_EHCI
 129 #define CONFIG_USB_EHCI_MX6
 130 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 131 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 132 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 133 #define CONFIG_USB_STORAGE
 134 #define CONFIG_CMD_USB_MASS_STORAGE
 135 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 136 #define CONFIG_CI_UDC
 137 #define CONFIG_USBD_HS
 138 #define CONFIG_USB_GADGET
 139 #define CONFIG_USB_GADGET_MASS_STORAGE
 140 #define CONFIG_USB_GADGET_DUALSPEED
 141 #define CONFIG_USB_GADGET_VBUS_DRAW     0
 142 #define CONFIG_USBDOWNLOAD_GADGET
 143 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 144 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 145 #define CONFIG_G_DNL_MANUFACTURER       "TBS"
 146 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 147 #define CONFIG_USB_KEYBOARD
 148 #ifdef CONFIG_USB_KEYBOARD
 149 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 150 #define CONFIG_SYS_STDIO_DEREGISTER
 151 #define CONFIG_PREBOOT \
 152         "if hdmidet; then " \
 153                 "usb start; " \
 154                 "run set_con_usb_hdmi; " \
 155         "else " \
 156                 "run set_con_serial; " \
 157         "fi;"
 158 #endif /* CONFIG_USB_KEYBOARD */
 159 #endif /* CONFIG_CMD_USB      */
 160
 161 /* RTC */
 162 #define CONFIG_CMD_DATE
 163 #ifdef CONFIG_CMD_DATE
 164 #define CONFIG_CMD_I2C
 165 #define CONFIG_RTC_DS1307
 166 #define CONFIG_SYS_RTC_BUS_NUM          2
 167 #endif
 168
 169 /* I2C */
 170 #define CONFIG_CMD_I2C
 171 #ifdef CONFIG_CMD_I2C
 172 #define CONFIG_SYS_I2C
 173 #define CONFIG_SYS_I2C_MXC
 174 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 175 #define CONFIG_SYS_I2C_SPEED            100000
 176 #define CONFIG_I2C_EDID
 177 #endif
 178
 179 /* Fuses */
 180 #define CONFIG_CMD_FUSE
 181 #ifdef CONFIG_CMD_FUSE
 182 #define CONFIG_MXC_OCOTP
 183 #endif
 184
 185 #ifndef CONFIG_SYS_DCACHE_OFF
 186 #define CONFIG_CMD_CACHE
 187 #endif
 188
 189 /* Environment organization */
 190 #define CONFIG_ENV_IS_IN_MMC
 191 #define CONFIG_SYS_MMC_ENV_DEV          2
 192 #define CONFIG_SYS_MMC_ENV_PART         1
 193 #define CONFIG_ENV_SIZE                 (8 * 1024)
 194 #define CONFIG_ENV_OFFSET               (384 * 1024)
 195 #define CONFIG_ENV_OVERWRITE
 196
 197 #define CONFIG_EXTRA_ENV_SETTINGS \
 198         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 199         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 200                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 201         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 202         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 203                         "${bootargs_mmc3}\0" \
 204         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 205                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 206         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 207                         "mmc read 0x10800000 0x800 0x4000; bootm\0" \
 208         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 209         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 210                         "run bootargs_upd; " \
 211                         "bootm 0x10800000 0x10d00000\0" \
 212         "console=ttymxc0\0" \
 213         "fan=gpio set 92\0" \
 214         "set_con_serial=setenv stdin serial; " \
 215                         "setenv stdout serial; " \
 216                         "setenv stderr serial;\0" \
 217         "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
 218                         "setenv stdout serial,vga; " \
 219                         "setenv stderr serial,vga;\0"
 220
 221 #define CONFIG_BOOTCOMMAND \
 222         "mmc rescan; " \
 223         "if run bootcmd_up1; then " \
 224                 "run bootcmd_up2; " \
 225         "else " \
 226                 "run bootcmd_mmc; " \
 227         "fi"
 228
 229 #endif                         /* __TBS2910_CONFIG_H * */