include/configs/tcm-bf518.h

   1 /*
   2  * U-boot - Configuration file for Bluetechnix TCM-BF518 board
   3  */
   4
   5 #ifndef __CONFIG_TCM_BF518_H__
   6 #define __CONFIG_TCM_BF518_H__
   7
   8 #include <asm/config-pre.h>
   9
  10
  11 /*
  12  * Processor Settings
  13  */
  14 #define CONFIG_BFIN_CPU             bf518-0.0
  15 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
  16
  17
  18 /*
  19  * Clock Settings
  20  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  21  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  22  */
  23 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  24 #define CONFIG_CLKIN_HZ                 25000000
  25 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  26 /*                                                1 = CLKIN / 2         */
  27 #define CONFIG_CLKIN_HALF               0
  28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  29 /*                                                1 = bypass PLL        */
  30 #define CONFIG_PLL_BYPASS               0
  31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  32 /* Values can range from 0-63 (where 0 means 64)                        */
  33 #define CONFIG_VCO_MULT                 16
  34 /* CCLK_DIV controls the core clock divider                             */
  35 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  36 #define CONFIG_CCLK_DIV                 1
  37 /* SCLK_DIV controls the system clock divider                           */
  38 /* Values can range from 1-15                                           */
  39 #define CONFIG_SCLK_DIV                 4
  40
  41
  42 /*
  43  * Memory Settings
  44  */
  45 /* This board has a 32meg MT48H16M16 */
  46 #define CONFIG_MEM_ADD_WDTH     9
  47 #define CONFIG_MEM_SIZE         32
  48
  49 #define CONFIG_EBIU_SDRRC_VAL   0x3f8
  50 #define CONFIG_EBIU_SDGCTL_VAL  0x9111cd
  51
  52 #define CONFIG_EBIU_AMGCTL_VAL  (AMBEN_ALL)
  53 #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
  54 #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
  55
  56 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024)
  57 #define CONFIG_SYS_MALLOC_LEN   (384 * 1024)
  58
  59
  60 /*
  61  * Network Settings
  62  */
  63 #if !defined(__ADSPBF512__) && !defined(__ADSPBF514__)
  64 #define ADI_CMDS_NETWORK        1
  65 #define CONFIG_BFIN_MAC
  66 #define CONFIG_NETCONSOLE       1
  67 #define CONFIG_NET_MULTI        1
  68 #endif
  69 #define CONFIG_HOSTNAME         tcm-bf518
  70 /* Uncomment next line to use fixed MAC address */
  71 /* #define CONFIG_ETHADDR       02:80:ad:20:31:e8 */
  72
  73
  74 /*
  75  * Flash Settings
  76  */
  77 #define CONFIG_FLASH_CFI_DRIVER
  78 #define CONFIG_SYS_FLASH_BASE           0x20000000
  79 #define CONFIG_SYS_FLASH_CFI
  80 #define CONFIG_SYS_FLASH_PROTECTION
  81 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  82 #define CONFIG_SYS_MAX_FLASH_SECT       19
  83
  84
  85 /*
  86  * SPI Settings
  87  */
  88 #define CONFIG_BFIN_SPI
  89 #define CONFIG_ENV_SPI_MAX_HZ   30000000
  90 #define CONFIG_SF_DEFAULT_SPEED 30000000
  91
  92
  93 /*
  94  * Env Storage Settings
  95  */
  96 #define CONFIG_ENV_IS_IN_FLASH
  97 #define CONFIG_ENV_OFFSET       0x8000
  98 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
  99 #define CONFIG_ENV_SIZE         0x2000
 100 #define CONFIG_ENV_SECT_SIZE    0x8000
 101 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 102
 103
 104 /*
 105  * I2C Settings
 106  */
 107 #define CONFIG_BFIN_TWI_I2C     1
 108 #define CONFIG_HARD_I2C         1
 109
 110
 111 /*
 112  * Misc Settings
 113  */
 114 #define CONFIG_BAUDRATE         115200
 115 #define CONFIG_MISC_INIT_R
 116 #define CONFIG_RTC_BFIN
 117 #define CONFIG_UART_CONSOLE     0
 118 #define CONFIG_BOOTCOMMAND      "run flashboot"
 119 #define FLASHBOOT_ENV_SETTINGS  "flashboot=bootm 0x20040000\0"
 120
 121
 122 /*
 123  * Pull in common ADI header for remaining command/environment setup
 124  */
 125 #include <configs/bfin_adi_common.h>
 126
 127 #endif