]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/tegra-common.h
Merge branch 'master' of git://git.denx.de/u-boot-arm
[people/ms/u-boot.git] / include / configs / tegra-common.h
1 /*
2 * (C) Copyright 2010-2012
3 * NVIDIA Corporation <www.nvidia.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8 #ifndef _TEGRA_COMMON_H_
9 #define _TEGRA_COMMON_H_
10 #include <linux/sizes.h>
11 #include <linux/stringify.h>
12
13 /*
14 * High Level Configuration Options
15 */
16 #define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
17 #define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
18
19 #include <asm/arch/tegra.h> /* get chip and board defs */
20
21 #define CONFIG_DM
22 #define CONFIG_CMD_DM
23 #define CONFIG_DM_GPIO
24 #ifndef CONFIG_SPL_BUILD
25 #define CONFIG_DM_SERIAL
26 #endif
27 #define CONFIG_DM_SPI
28 #define CONFIG_DM_SPI_FLASH
29 #define CONFIG_DM_I2C
30
31 #define CONFIG_SYS_TIMER_RATE 1000000
32 #define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
33
34 /*
35 * Display CPU and Board information
36 */
37 #define CONFIG_DISPLAY_CPUINFO
38 #define CONFIG_DISPLAY_BOARDINFO
39
40 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
41
42 /* Environment */
43 #define CONFIG_ENV_VARS_UBOOT_CONFIG
44 #define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
45
46 /*
47 * Size of malloc() pool
48 */
49 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
50 #define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
51
52 #define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */
53
54 /*
55 * NS16550 Configuration
56 */
57 #ifdef CONFIG_SPL_BUILD
58 #define CONFIG_SYS_NS16550_SERIAL
59 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
60 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
61 #else
62 #define CONFIG_TEGRA_SERIAL
63 #endif
64 #define CONFIG_SYS_NS16550
65
66 /*
67 * Common HW configuration.
68 * If this varies between SoCs later, move to tegraNN-common.h
69 * Note: This is number of devices, not max device ID.
70 */
71 #define CONFIG_SYS_MMC_MAX_DEVICE 4
72
73 /*
74 * select serial console configuration
75 */
76 #define CONFIG_CONS_INDEX 1
77
78 /* allow to overwrite serial and ethaddr */
79 #define CONFIG_ENV_OVERWRITE
80 #define CONFIG_BAUDRATE 115200
81
82 /* include default commands */
83 #include <config_cmd_default.h>
84
85 /* remove unused commands */
86 #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
87 #undef CONFIG_CMD_FPGA /* FPGA configuration support */
88 #undef CONFIG_CMD_IMI
89 #undef CONFIG_CMD_IMLS
90 #undef CONFIG_CMD_NFS /* NFS support */
91 #undef CONFIG_CMD_NET /* network support */
92
93 /* turn on command-line edit/hist/auto */
94 #define CONFIG_COMMAND_HISTORY
95
96 /* turn on commonly used storage-related commands */
97 #define CONFIG_PARTITION_UUIDS
98 #define CONFIG_CMD_PART
99
100 #define CONFIG_SYS_NO_FLASH
101
102 #define CONFIG_CONSOLE_MUX
103 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
104
105 /*
106 * Miscellaneous configurable options
107 */
108 #define CONFIG_SYS_PROMPT V_PROMPT
109 /*
110 * Increasing the size of the IO buffer as default nfsargs size is more
111 * than 256 and so it is not possible to edit it
112 */
113 #define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */
114 /* Print Buffer Size */
115 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
116 sizeof(CONFIG_SYS_PROMPT) + 16)
117 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
118 /* Boot Argument Buffer Size */
119 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
120
121 #define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
122 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
123
124 #ifndef CONFIG_SPL_BUILD
125 #define CONFIG_USE_ARCH_MEMCPY
126 #endif
127
128 /*-----------------------------------------------------------------------
129 * Physical Memory Map
130 */
131 #define CONFIG_NR_DRAM_BANKS 1
132 #define PHYS_SDRAM_1 NV_PA_SDRC_CS0
133 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
134
135 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
136 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
137
138 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
139
140 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
141 #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
142 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
143 CONFIG_SYS_INIT_RAM_SIZE - \
144 GENERATED_GBL_DATA_SIZE)
145
146 #define CONFIG_TEGRA_GPIO
147 #define CONFIG_CMD_GPIO
148 #define CONFIG_CMD_ENTERRCM
149
150 /* Defines for SPL */
151 #define CONFIG_SPL_FRAMEWORK
152 #define CONFIG_SPL_RAM_DEVICE
153 #define CONFIG_SPL_BOARD_INIT
154 #define CONFIG_SPL_NAND_SIMPLE
155 #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \
156 CONFIG_SPL_TEXT_BASE)
157 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
158
159 #define CONFIG_SPL_LIBCOMMON_SUPPORT
160 #define CONFIG_SPL_LIBGENERIC_SUPPORT
161 #define CONFIG_SPL_SERIAL_SUPPORT
162 #define CONFIG_SPL_GPIO_SUPPORT
163
164 #define CONFIG_SYS_GENERIC_BOARD
165
166 /* Misc utility code */
167 #define CONFIG_BOUNCE_BUFFER
168 #define CONFIG_CRC32_VERIFY
169
170 #ifndef CONFIG_SPL_BUILD
171 #include <config_distro_defaults.h>
172 #endif
173
174 #endif /* _TEGRA_COMMON_H_ */