include/configs/theadorable.h

   1 /*
   2  * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_THEADORABLE_H
   8 #define _CONFIG_THEADORABLE_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_DISPLAY_BOARDINFO_LATE
  14
  15 /*
  16  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  17  * for DDR ECC byte filling in the SPL before loading the main
  18  * U-Boot into it.
  19  */
  20 #define CONFIG_SYS_TEXT_BASE    0x00800000
  21 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  22
  23 /*
  24  * Commands configuration
  25  */
  26 #define CONFIG_CMD_BOOTZ
  27 #define CONFIG_CMD_CACHE
  28 #define CONFIG_CMD_ENV
  29 #define CONFIG_CMD_EXT2
  30 #define CONFIG_CMD_EXT4
  31 #define CONFIG_CMD_FAT
  32 #define CONFIG_CMD_FS_GENERIC
  33 #define CONFIG_CMD_I2C
  34 #define CONFIG_CMD_SATA
  35 #define CONFIG_CMD_TIME
  36
  37 /*
  38  * The debugging version enables USB support via defconfig.
  39  * This version should also enable all other non-production
  40  * interfaces / features.
  41  */
  42 #ifdef CONFIG_USB
  43 #define CONFIG_CMD_DHCP
  44 #define CONFIG_CMD_PCI
  45 #define CONFIG_CMD_PING
  46 #define CONFIG_CMD_SPI
  47 #define CONFIG_CMD_TFTPPUT
  48 #endif
  49
  50 /* I2C */
  51 #define CONFIG_SYS_I2C
  52 #define CONFIG_SYS_I2C_MVTWSI
  53 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  54 #define CONFIG_I2C_MVTWSI_BASE1         MVEBU_TWSI1_BASE
  55 #define CONFIG_SYS_I2C_SLAVE            0x0
  56 #define CONFIG_SYS_I2C_SPEED            100000
  57
  58 /* USB/EHCI configuration */
  59 #define CONFIG_EHCI_IS_TDI
  60 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
  61
  62 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  63
  64 /* SPI NOR flash default params, used by sf commands */
  65 #define CONFIG_SF_DEFAULT_SPEED         27777777 /* for fast SPL booting */
  66 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  67
  68 /* Environment in SPI NOR flash */
  69 #define CONFIG_ENV_IS_IN_SPI_FLASH
  70 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  71 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  72 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  73 #define CONFIG_ENV_OVERWRITE
  74
  75 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  76 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  77
  78 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
  79 #define CONFIG_SYS_ALT_MEMTEST
  80 #define CONFIG_PREBOOT
  81
  82 #define CONFIG_SYS_HUSH_PARSER                  /* Use the HUSH parser  */
  83 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  84
  85 /* Keep device tree and initrd in lower memory so the kernel can access them */
  86 #define CONFIG_EXTRA_ENV_SETTINGS       \
  87         "fdt_high=0x10000000\0"         \
  88         "initrd_high=0x10000000\0"
  89
  90 /* SATA support */
  91 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  92 #define CONFIG_SATA_MV
  93 #define CONFIG_LIBATA
  94 #define CONFIG_LBA48
  95 #define CONFIG_EFI_PARTITION
  96 #define CONFIG_DOS_PARTITION
  97
  98 /* Additional FS support/configuration */
  99 #define CONFIG_SUPPORT_VFAT
 100
 101 /* PCIe support */
 102 #ifdef CONFIG_CMD_PCI
 103 #ifndef CONFIG_SPL_BUILD
 104 #define CONFIG_PCI
 105 #define CONFIG_PCI_MVEBU
 106 #define CONFIG_PCI_PNP
 107 #define CONFIG_BOARD_LATE_INIT          /* for PEX switch test */
 108 #endif
 109 #endif
 110
 111 /* Enable LCD and reserve 512KB from top of memory*/
 112 #define CONFIG_SYS_MEM_TOP_HIDE         0x80000
 113
 114 #define CONFIG_VIDEO
 115 #define CONFIG_CFB_CONSOLE
 116 #define CONFIG_VGA_AS_SINGLE_DEVICE
 117 #define CONFIG_CMD_BMP
 118
 119 /* FPGA programming support */
 120 #define CONFIG_FPGA
 121 #define CONFIG_FPGA_ALTERA
 122 #define CONFIG_FPGA_STRATIX_V
 123
 124 /*
 125  * Bootcounter
 126  */
 127 #define CONFIG_BOOTCOUNT_LIMIT
 128 #define CONFIG_BOOTCOUNT_RAM
 129 /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */
 130 #define BOOTCOUNT_ADDR                  0x1000
 131
 132 /*
 133  * mv-common.h should be defined after CMD configs since it used them
 134  * to enable certain macros
 135  */
 136 #include "mv-common.h"
 137
 138 /*
 139  * Memory layout while starting into the bin_hdr via the
 140  * BootROM:
 141  *
 142  * 0x4000.4000 - 0x4003.4000    headers space (192KiB)
 143  * 0x4000.4030                  bin_hdr start address
 144  * 0x4003.4000 - 0x4004.7c00    BootROM memory allocations (15KiB)
 145  * 0x4007.fffc                  BootROM stack top
 146  *
 147  * The address space between 0x4007.fffc and 0x400f.fff is not locked in
 148  * L2 cache thus cannot be used.
 149  */
 150
 151 /* SPL */
 152 /* Defines for SPL */
 153 #define CONFIG_SPL_FRAMEWORK
 154 #define CONFIG_SPL_TEXT_BASE            0x40004030
 155 #define CONFIG_SPL_MAX_SIZE             ((128 << 10) - 0x4030)
 156
 157 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + (128 << 10))
 158 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 159
 160 #ifdef CONFIG_SPL_BUILD
 161 #define CONFIG_SYS_MALLOC_SIMPLE
 162 #endif
 163
 164 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
 165 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 166
 167 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 168 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 169 #define CONFIG_SPL_SERIAL_SUPPORT
 170 #define CONFIG_SPL_I2C_SUPPORT
 171
 172 /* SPL related SPI defines */
 173 #define CONFIG_SPL_SPI_SUPPORT
 174 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 175 #define CONFIG_SPL_SPI_LOAD
 176 #define CONFIG_SPL_SPI_BUS              0
 177 #define CONFIG_SPL_SPI_CS               0
 178 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x1a000
 179 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 180
 181 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 182 #define CONFIG_DDR_FIXED_SIZE           (2 << 20)       /* 2GiB */
 183
 184 #endif /* _CONFIG_THEADORABLE_H */