include/configs/ti816x_evm.h

   1 /*
   2  * ti816x_evm.h
   3  *
   4  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   5  * Antoine Tenart, <atenart@adeneo-embedded.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_TI816X_EVM_H
  11 #define __CONFIG_TI816X_EVM_H
  12
  13 #define CONFIG_SYS_CACHELINE_SIZE       64
  14
  15 #define CONFIG_TI81XX
  16 #define CONFIG_TI816X
  17 #define CONFIG_SYS_NO_FLASH
  18 #define CONFIG_OMAP
  19 #define CONFIG_OMAP_COMMON
  20
  21 #define CONFIG_ARCH_CPU_INIT
  22
  23 #include <asm/arch/omap.h>
  24
  25 #define CONFIG_ENV_SIZE                 0x2000
  26 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (32 * 1024))
  27 #define CONFIG_SYS_LONGHELP             /* undef save memory */
  28 #define CONFIG_MACH_TYPE                MACH_TYPE_TI8168EVM
  29
  30 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  31 #define CONFIG_SETUP_MEMORY_TAGS
  32 #define CONFIG_INITRD_TAG               /* required for ramdisk support */
  33
  34 #define CONFIG_VERSION_VARIABLE
  35 #define CONFIG_DISPLAY_CPUINFO
  36
  37 #define CONFIG_BOOTDELAY                3 /* set negative for no autoboot */
  38 #define CONFIG_EXTRA_ENV_SETTINGS       \
  39         "loadaddr=0x81000000\0"         \
  40
  41 #define CONFIG_BOOTCOMMAND                      \
  42         "mmc rescan;"                           \
  43         "fatload mmc 0 ${loadaddr} uImage;"     \
  44         "bootm ${loadaddr}"                     \
  45
  46 #define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd earlyprintk"
  47
  48 /* Clock Defines */
  49 #define V_OSCK          24000000    /* Clock output from T2 */
  50 #define V_SCLK          (V_OSCK >> 1)
  51
  52 #define CONFIG_SYS_MAXARGS      32
  53 #define CONFIG_SYS_CBSIZE       512 /* console I/O buffer size */
  54 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
  55                 + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
  56 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* boot arg buffer size */
  57
  58 #define CONFIG_SYS_LOAD_ADDR            0x81000000 /* Default load address */
  59
  60 #define CONFIG_CMD_ASKEN
  61 #define CONFIG_OMAP_GPIO
  62 #define CONFIG_MMC
  63 #define CONFIG_GENERIC_MMC
  64 #define CONFIG_OMAP_HSMMC
  65 #define CONFIG_DOS_PARTITION
  66
  67 #define CONFIG_FS_FAT
  68
  69 /*
  70  * Only one of the following two options (DDR3/DDR2) should be enabled
  71  * CONFIG_TI816X_EVM_DDR2
  72  * CONFIG_TI816X_EVM_DDR3
  73  */
  74 #define CONFIG_TI816X_EVM_DDR3
  75
  76 /*
  77  * Supported values: 400, 531, 675 or 796 MHz
  78  */
  79 #define CONFIG_TI816X_DDR_PLL_796
  80
  81 #define CONFIG_TI816X_USE_EMIF0 1
  82 #define CONFIG_TI816X_USE_EMIF1 1
  83
  84 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 banks of DRAM */
  85 #define PHYS_DRAM_1             0x80000000      /* DRAM Bank #1 */
  86 #define PHYS_DRAM_1_SIZE        0x40000000      /* 1 GB */
  87 #define PHYS_DRAM_2             0xC0000000      /* DRAM Bank #2 */
  88 #define PHYS_DRAM_2_SIZE        0x40000000      /* 1 GB */
  89
  90 #define CONFIG_MAX_RAM_BANK_SIZE        (2048 << 20)    /* 2048MB */
  91 #define CONFIG_SYS_SDRAM_BASE           PHYS_DRAM_1
  92 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  93                 GENERATED_GBL_DATA_SIZE)
  94
  95 /**
  96  * Platform/Board specific defs
  97  */
  98 #define CONFIG_SYS_CLK_FREQ     27000000
  99 #define CONFIG_SYS_TIMERBASE    0x4802E000
 100 #define CONFIG_SYS_PTV          2   /* Divisor: 2^(PTV+1) => 8 */
 101
 102 #undef CONFIG_NAND_OMAP_GPMC
 103
 104 /*
 105  * NS16550 Configuration
 106  */
 107 #define CONFIG_SYS_NS16550_SERIAL
 108 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
 109 #define CONFIG_SYS_NS16550_CLK      (48000000)
 110 #define CONFIG_SYS_NS16550_COM1     0x48024000  /* Base EVM has UART2 */
 111
 112 #define CONFIG_BAUDRATE     115200
 113
 114 /* allow overwriting serial config and ethaddr */
 115 #define CONFIG_ENV_OVERWRITE
 116
 117 #define CONFIG_SERIAL1
 118 #define CONFIG_SERIAL2
 119 #define CONFIG_SERIAL3
 120 #define CONFIG_CONS_INDEX       1
 121 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 122
 123 #define CONFIG_ENV_IS_NOWHERE
 124
 125 /* SPL */
 126 /* Defines for SPL */
 127 #define CONFIG_SPL_FRAMEWORK
 128 #define CONFIG_SPL_TEXT_BASE    0x40400000
 129 #define CONFIG_SPL_MAX_SIZE     ((128 - 18) * 1024)
 130
 131 #define CONFIG_SPL_BSS_START_ADDR   0x80000000
 132 #define CONFIG_SPL_BSS_MAX_SIZE     0x80000     /* 512 KB */
 133
 134 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 135 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 136 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 137 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 138 #define CONFIG_SPL_MMC_SUPPORT
 139 #define CONFIG_SPL_FAT_SUPPORT
 140
 141 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 142 #define CONFIG_SPL_LIBDISK_SUPPORT
 143 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 144 #define CONFIG_SPL_SERIAL_SUPPORT
 145 #define CONFIG_SPL_GPIO_SUPPORT
 146 #define CONFIG_SPL_YMODEM_SUPPORT
 147 #define CONFIG_SYS_SPI_U_BOOT_OFFS  0x20000
 148 #define CONFIG_SYS_SPI_U_BOOT_SIZE  0x40000
 149 #define CONFIG_SPL_LDSCRIPT     "$(CPUDIR)/omap-common/u-boot-spl.lds"
 150
 151 #define CONFIG_SPL_BOARD_INIT
 152
 153 #define CONFIG_SYS_TEXT_BASE        0x80800000
 154 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
 155 #define CONFIG_SYS_SPL_MALLOC_SIZE  0x100000
 156
 157 /* Since SPL did pll and ddr initialization for us,
 158  * we don't need to do it twice.
 159  */
 160 #ifndef CONFIG_SPL_BUILD
 161 #define CONFIG_SKIP_LOWLEVEL_INIT
 162 #endif
 163
 164 /* Unsupported features */
 165 #undef CONFIG_USE_IRQ
 166
 167 #endif