include/configs/ti816x_evm.h

   1 /*
   2  * ti816x_evm.h
   3  *
   4  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
   5  * Antoine Tenart, <atenart@adeneo-embedded.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_TI816X_EVM_H
  11 #define __CONFIG_TI816X_EVM_H
  12
  13 #include <configs/ti_armv7_omap.h>
  14 #include <asm/arch/omap.h>
  15
  16 #define CONFIG_ENV_SIZE                 0x2000
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_TI8168EVM
  18
  19 #define CONFIG_EXTRA_ENV_SETTINGS       \
  20         DEFAULT_LINUX_BOOT_ENV \
  21         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
  22         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
  23
  24 #define CONFIG_BOOTCOMMAND                      \
  25         "mmc rescan;"                           \
  26         "fatload mmc 0 ${loadaddr} uImage;"     \
  27         "bootm ${loadaddr}"                     \
  28
  29 /* Clock Defines */
  30 #define V_OSCK          24000000    /* Clock output from T2 */
  31 #define V_SCLK          (V_OSCK >> 1)
  32
  33 #define CONFIG_CMD_ASKENV
  34
  35 #define CONFIG_MAX_RAM_BANK_SIZE        (2048 << 20)    /* 2048MB */
  36 #define CONFIG_SYS_SDRAM_BASE           0x80000000
  37
  38 /**
  39  * Platform/Board specific defs
  40  */
  41 #define CONFIG_SYS_CLK_FREQ     27000000
  42 #define CONFIG_SYS_TIMERBASE    0x4802E000
  43 #define CONFIG_SYS_PTV          2   /* Divisor: 2^(PTV+1) => 8 */
  44
  45 /*
  46  * NS16550 Configuration
  47  */
  48 #define CONFIG_SYS_NS16550_SERIAL
  49 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
  50 #define CONFIG_SYS_NS16550_CLK      (48000000)
  51 #define CONFIG_SYS_NS16550_COM1     0x48024000  /* Base EVM has UART2 */
  52
  53 /* allow overwriting serial config and ethaddr */
  54 #define CONFIG_ENV_OVERWRITE
  55
  56 #define CONFIG_SERIAL1
  57 #define CONFIG_SERIAL2
  58 #define CONFIG_SERIAL3
  59 #define CONFIG_CONS_INDEX       1
  60
  61 /*
  62  * GPMC NAND block.  We support 1 device and the physical address to
  63  * access CS0 at is 0x8000000.
  64  */
  65 #define CONFIG_SYS_NAND_BASE            0x8000000
  66 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  67
  68 /* NAND: SPL related configs */
  69
  70 /* NAND: device related configs */
  71 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  72 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
  73                                          CONFIG_SYS_NAND_PAGE_SIZE)
  74 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  75 #define CONFIG_SYS_NAND_OOBSIZE         64
  76 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
  77 /* NAND: driver related configs */
  78 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  79 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
  80                                          10, 11, 12, 13, 14, 15, 16, 17, \
  81                                          18, 19, 20, 21, 22, 23, 24, 25, \
  82                                          26, 27, 28, 29, 30, 31, 32, 33, \
  83                                          34, 35, 36, 37, 38, 39, 40, 41, \
  84                                          42, 43, 44, 45, 46, 47, 48, 49, \
  85                                          50, 51, 52, 53, 54, 55, 56, 57, }
  86
  87 #define CONFIG_SYS_NAND_ECCSIZE         512
  88 #define CONFIG_SYS_NAND_ECCBYTES        14
  89 #define CONFIG_SYS_NAND_ONFI_DETECTION
  90 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
  91 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
  92 #define CONFIG_ENV_OFFSET               0x001c0000
  93 #define CONFIG_ENV_OFFSET_REDUND        0x001e0000
  94 #define CONFIG_SYS_ENV_SECT_SIZE        CONFIG_SYS_NAND_BLOCK_SIZE
  95
  96 /* SPL */
  97 /* Defines for SPL */
  98 #define CONFIG_SPL_TEXT_BASE    0x40400000
  99 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 100                                          CONFIG_SPL_TEXT_BASE)
 101
 102 #define CONFIG_DRIVER_TI_EMAC
 103 #define CONFIG_MII
 104 #define CONFIG_BOOTP_DNS2
 105 #define CONFIG_BOOTP_SEND_HOSTNAME
 106 #define CONFIG_NET_RETRY_COUNT  10
 107
 108 /* Since SPL did pll and ddr initialization for us,
 109  * we don't need to do it twice.
 110  */
 111 #ifndef CONFIG_SPL_BUILD
 112 #define CONFIG_SKIP_LOWLEVEL_INIT
 113 #endif
 114
 115 /*
 116  * Disable MMC DM for SPL build and can be re-enabled after adding
 117  * DM support in SPL
 118  */
 119 #ifdef CONFIG_SPL_BUILD
 120 #undef CONFIG_DM_MMC
 121 #undef CONFIG_TIMER
 122 #endif
 123 #endif