]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/ti816x_evm.h
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
[people/ms/u-boot.git] / include / configs / ti816x_evm.h
1 /*
2 * ti816x_evm.h
3 *
4 * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
5 * Antoine Tenart, <atenart@adeneo-embedded.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10 #ifndef __CONFIG_TI816X_EVM_H
11 #define __CONFIG_TI816X_EVM_H
12
13 #define CONFIG_TI81XX
14 #define CONFIG_TI816X
15 #define CONFIG_SYS_NO_FLASH
16 #define CONFIG_OMAP
17 #define CONFIG_OMAP_COMMON
18
19 #define CONFIG_ARCH_CPU_INIT
20
21 #include <asm/arch/omap.h>
22
23 #define CONFIG_ENV_SIZE 0x2000
24 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024))
25 #define CONFIG_SYS_LONGHELP /* undef save memory */
26 #define CONFIG_SYS_HUSH_PARSER
27 #define CONFIG_SYS_PROMPT "u-boot/ti816x# "
28 #define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM
29
30 #define CONFIG_OF_LIBFDT
31 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
32 #define CONFIG_SETUP_MEMORY_TAGS
33 #define CONFIG_INITRD_TAG /* required for ramdisk support */
34
35 #include <config_cmd_default.h> /* u-boot default commands */
36
37 #define CONFIG_VERSION_VARIABLE
38 #define CONFIG_DISPLAY_CPUINFO
39
40 #define CONFIG_BOOTDELAY 3 /* set negative for no autoboot */
41 #define CONFIG_EXTRA_ENV_SETTINGS \
42 "loadaddr=0x81000000\0" \
43
44 #define CONFIG_BOOTCOMMAND \
45 "mmc rescan;" \
46 "fatload mmc 0 ${loadaddr} uImage;" \
47 "bootm ${loadaddr}" \
48
49 #define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd earlyprintk"
50
51 /* Clock Defines */
52 #define V_OSCK 24000000 /* Clock output from T2 */
53 #define V_SCLK (V_OSCK >> 1)
54
55 #define CONFIG_SYS_MAXARGS 32
56 #define CONFIG_SYS_CBSIZE 512 /* console I/O buffer size */
57 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
58 + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
59 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */
60
61 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
62
63 #define CONFIG_CMD_ASKEN
64 #define CONFIG_CMD_ECHO
65 #define CONFIG_OMAP_GPIO
66 #define CONFIG_MMC
67 #define CONFIG_GENERIC_MMC
68 #define CONFIG_OMAP_HSMMC
69 #define CONFIG_CMD_MMC
70 #define CONFIG_DOS_PARTITION
71 #define CONFIG_CMD_FAT
72 #define CONFIG_CMD_EXT2
73
74 #define CONFIG_FS_FAT
75
76 /*
77 * Only one of the following two options (DDR3/DDR2) should be enabled
78 * CONFIG_TI816X_EVM_DDR2
79 * CONFIG_TI816X_EVM_DDR3
80 */
81 #define CONFIG_TI816X_EVM_DDR3
82
83 /*
84 * Supported values: 400, 531, 675 or 796 MHz
85 */
86 #define CONFIG_TI816X_DDR_PLL_796
87
88 #define CONFIG_TI816X_USE_EMIF0 1
89 #define CONFIG_TI816X_USE_EMIF1 1
90
91
92 #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */
93 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
94 #define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */
95 #define PHYS_DRAM_2 0xC0000000 /* DRAM Bank #2 */
96 #define PHYS_DRAM_2_SIZE 0x40000000 /* 1 GB */
97
98 #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */
99 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
100 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
101 GENERATED_GBL_DATA_SIZE)
102
103 /**
104 * Platform/Board specific defs
105 */
106 #define CONFIG_SYS_CLK_FREQ 27000000
107 #define CONFIG_SYS_TIMERBASE 0x4802E000
108 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
109
110 #undef CONFIG_NAND_OMAP_GPMC
111
112 /*
113 * NS16550 Configuration
114 */
115 #define CONFIG_SYS_NS16550
116 #define CONFIG_SYS_NS16550_SERIAL
117 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
118 #define CONFIG_SYS_NS16550_CLK (48000000)
119 #define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */
120
121 #define CONFIG_BAUDRATE 115200
122
123 /* allow overwriting serial config and ethaddr */
124 #define CONFIG_ENV_OVERWRITE
125
126 #define CONFIG_SERIAL1
127 #define CONFIG_SERIAL2
128 #define CONFIG_SERIAL3
129 #define CONFIG_CONS_INDEX 1
130 #define CONFIG_SYS_CONSOLE_INFO_QUIET
131
132 #define CONFIG_ENV_IS_NOWHERE
133
134 /* SPL */
135 /* Defines for SPL */
136 #define CONFIG_SPL_FRAMEWORK
137 #define CONFIG_SPL_TEXT_BASE 0x40400000
138 #define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
139 #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
140
141 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
142 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
143
144 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
145 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
146 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
147 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
148 #define CONFIG_SPL_MMC_SUPPORT
149 #define CONFIG_SPL_FAT_SUPPORT
150
151 #define CONFIG_SPL_LIBCOMMON_SUPPORT
152 #define CONFIG_SPL_LIBDISK_SUPPORT
153 #define CONFIG_SPL_LIBGENERIC_SUPPORT
154 #define CONFIG_SPL_SERIAL_SUPPORT
155 #define CONFIG_SPL_GPIO_SUPPORT
156 #define CONFIG_SPL_YMODEM_SUPPORT
157 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
158 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
159 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
160
161 #define CONFIG_SPL_BOARD_INIT
162
163 #define CONFIG_SYS_TEXT_BASE 0x80800000
164 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
165 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
166
167 /* Since SPL did pll and ddr initialization for us,
168 * we don't need to do it twice.
169 */
170 #ifndef CONFIG_SPL_BUILD
171 #define CONFIG_SKIP_LOWLEVEL_INIT
172 #endif
173
174 /* Unsupported features */
175 #undef CONFIG_USE_IRQ
176
177 #endif