include/configs/titanium.h

   1 /*
   2  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
   3  *
   4  * Configuration settings for the ProjectionDesign / Barco
   5  * Titanium board.
   6  *
   7  * Based on mx6qsabrelite.h which is:
   8  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include "mx6_common.h"
  17 #include <asm/arch/imx-regs.h>
  18 #include <asm/imx-common/gpio.h>
  19
  20 #define CONFIG_MX6
  21 #define CONFIG_MX6Q
  22 #define CONFIG_DISPLAY_CPUINFO
  23 #define CONFIG_DISPLAY_BOARDINFO
  24
  25 #define MACH_TYPE_TITANIUM              3769
  26 #define CONFIG_MACH_TYPE                MACH_TYPE_TITANIUM
  27
  28 #define CONFIG_CMDLINE_TAG
  29 #define CONFIG_SETUP_MEMORY_TAGS
  30 #define CONFIG_INITRD_TAG
  31 #define CONFIG_REVISION_TAG
  32
  33 /* Size of malloc() pool */
  34 #define CONFIG_SYS_MALLOC_LEN           (2 * 1024 * 1024)
  35
  36 #define CONFIG_BOARD_EARLY_INIT_F
  37 #define CONFIG_MISC_INIT_R
  38 #define CONFIG_MXC_GPIO
  39
  40 #define CONFIG_MXC_UART
  41 #define CONFIG_MXC_UART_BASE            UART1_BASE
  42
  43 /* I2C Configs */
  44 #define CONFIG_CMD_I2C
  45 #define CONFIG_SYS_I2C
  46 #define CONFIG_SYS_I2C_MXC
  47 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  48 #define CONFIG_SYS_I2C_SPEED            100000
  49
  50 /* MMC Configs */
  51 #define CONFIG_FSL_ESDHC
  52 #define CONFIG_FSL_USDHC
  53 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  54 #define CONFIG_SYS_FSL_USDHC_NUM        1
  55
  56 #define CONFIG_MMC
  57 #define CONFIG_CMD_MMC
  58 #define CONFIG_GENERIC_MMC
  59 #define CONFIG_BOUNCE_BUFFER
  60 #define CONFIG_CMD_EXT2
  61 #define CONFIG_CMD_FAT
  62 #define CONFIG_DOS_PARTITION
  63
  64 #define CONFIG_CMD_PING
  65 #define CONFIG_CMD_DHCP
  66 #define CONFIG_CMD_MII
  67 #define CONFIG_CMD_NET
  68 #define CONFIG_FEC_MXC
  69 #define CONFIG_MII
  70 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  71 #define CONFIG_FEC_XCV_TYPE             RGMII
  72 #define CONFIG_FEC_MXC_PHYADDR          4
  73 #define CONFIG_PHYLIB
  74 #define CONFIG_PHY_MICREL
  75 #define CONFIG_PHY_MICREL_KSZ9021
  76
  77 /* USB Configs */
  78 #define CONFIG_CMD_USB
  79 #define CONFIG_CMD_FAT
  80 #define CONFIG_USB_EHCI
  81 #define CONFIG_USB_EHCI_MX6
  82 #define CONFIG_USB_STORAGE
  83 #define CONFIG_MXC_USB_PORT     1
  84 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  85 #define CONFIG_MXC_USB_FLAGS    0
  86
  87 /* Miscellaneous commands */
  88 #define CONFIG_CMD_BMODE
  89
  90 /* allow to overwrite serial and ethaddr */
  91 #define CONFIG_ENV_OVERWRITE
  92 #define CONFIG_CONS_INDEX               1
  93 #define CONFIG_BAUDRATE                 115200
  94
  95 /* Command definition */
  96 #include <config_cmd_default.h>
  97
  98 #undef CONFIG_CMD_IMLS
  99
 100 #define CONFIG_BOOTDELAY                3
 101
 102 #define CONFIG_LOADADDR                 0x12000000
 103 #define CONFIG_SYS_TEXT_BASE            0x17800000
 104
 105 #define CONFIG_SYS_MEMTEST_START        0x10000000
 106 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (500 << 20))
 107
 108 #define CONFIG_HOSTNAME                 titanium
 109 #define CONFIG_UBI_PART                 ubi
 110 #define CONFIG_UBIFS_VOLUME             rootfs0
 111
 112 #define MTDIDS_DEFAULT          "nand0=gpmi-nand"
 113 #define MTDPARTS_DEFAULT        "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
 114                                 "512k(env2),-(ubi)"
 115
 116 #define CONFIG_EXTRA_ENV_SETTINGS \
 117         "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"              \
 118         "kernel_fs=/boot/uImage\0"                                      \
 119         "kernel_addr=11000000\0"                                        \
 120         "dtb=" __stringify(CONFIG_HOSTNAME) "/"                         \
 121                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
 122         "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"           \
 123         "dtb_addr=12800000\0"                                           \
 124         "script=boot.scr\0" \
 125         "uimage=uImage\0" \
 126         "console=ttymxc0\0" \
 127         "baudrate=115200\0" \
 128         "fdt_high=0xffffffff\0"   \
 129         "initrd_high=0xffffffff\0" \
 130         "mmcdev=0\0" \
 131         "mmcpart=1\0" \
 132         "uimage=uImage\0" \
 133         "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
 134                 " ${script}\0" \
 135         "bootscript=echo Running bootscript from mmc ...; source\0" \
 136         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 137         "mmcroot=/dev/mmcblk0p2\0" \
 138         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 139                 "root=${mmcroot} rootwait rw\0" \
 140         "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
 141                 " ${uimage}; bootm\0" \
 142         "addip=setenv bootargs ${bootargs} "                            \
 143                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 144                 ":${hostname}:${netdev}:off panic=1\0"                  \
 145         "addcon=setenv bootargs ${bootargs} console=ttymxc0,"           \
 146                 "${baudrate}\0"                                         \
 147         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 148         "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0"       \
 149         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 150                 "nfsroot=${serverip}:${rootpath}\0"                     \
 151         "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"            \
 152         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
 153         "boot_vol=0\0"                                                  \
 154         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
 155         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
 156         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
 157                 " ${filesize}\0"                                        \
 158         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
 159         "init_ubi=nand erase.part ubi;ubi part ${part};"                \
 160                 "ubi create ${vol} c800000\0"                           \
 161         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 162         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 163         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
 164                 " addcon addmtd;"                                       \
 165                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 166         "ubifsargs=set bootargs ubi.mtd=ubi "                           \
 167                 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0"         \
 168         "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0"   \
 169         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
 170                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
 171         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
 172                 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0"           \
 173         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
 174         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
 175         "net_nfs=run load_dtb load_kernel; "                            \
 176                 "run nfsargs addip addcon addmtd;"                      \
 177                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 178         "delenv=env default -a -f; saveenv; reset\0"
 179
 180 #define CONFIG_BOOTCOMMAND              "run nand_ubifs"
 181
 182 /* Miscellaneous configurable options */
 183 #define CONFIG_SYS_LONGHELP
 184 #define CONFIG_SYS_HUSH_PARSER
 185 #define CONFIG_SYS_PROMPT               "Titanium > "
 186 #define CONFIG_AUTO_COMPLETE
 187 #define CONFIG_CMDLINE_EDITING
 188 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup */
 189
 190 #define CONFIG_SYS_CBSIZE               256
 191
 192 /* Print Buffer Size */
 193 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 194                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 195 #define CONFIG_SYS_MAXARGS              16
 196 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 197
 198 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 199
 200 /* Physical Memory Map */
 201 #define CONFIG_NR_DRAM_BANKS            1
 202 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 203 #define PHYS_SDRAM_SIZE                 (512 << 20)
 204
 205 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 206 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 207 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 208
 209 #define CONFIG_SYS_INIT_SP_OFFSET \
 210         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 211 #define CONFIG_SYS_INIT_SP_ADDR \
 212         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 213
 214 /* FLASH and environment organization */
 215 #define CONFIG_SYS_NO_FLASH
 216
 217 /* Enable NAND support */
 218 #define CONFIG_CMD_NAND
 219 #define CONFIG_CMD_NAND_TRIMFFS
 220 #define CONFIG_CMD_TIME
 221
 222 #ifdef CONFIG_CMD_NAND
 223
 224 /* NAND stuff */
 225 #define CONFIG_NAND_MXS
 226 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 227 #define CONFIG_SYS_NAND_BASE            0x40000000
 228 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 229 #define CONFIG_SYS_NAND_ONFI_DETECTION
 230
 231 /* DMA stuff, needed for GPMI/MXS NAND support */
 232 #define CONFIG_APBH_DMA
 233 #define CONFIG_APBH_DMA_BURST
 234 #define CONFIG_APBH_DMA_BURST8
 235
 236 /* Environment in NAND */
 237 #define CONFIG_ENV_IS_IN_NAND
 238 #define CONFIG_ENV_OFFSET               (16 << 20)
 239 #define CONFIG_ENV_SECT_SIZE            (128 << 10)
 240 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
 241 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + (512 << 10))
 242 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 243
 244 #else /* CONFIG_CMD_NAND */
 245
 246 /* Environment in MMC */
 247 #define CONFIG_ENV_SIZE                 (8 << 10)
 248 #define CONFIG_ENV_IS_IN_MMC
 249 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 250 #define CONFIG_SYS_MMC_ENV_DEV          0
 251
 252 #endif /* CONFIG_CMD_NAND */
 253
 254 /* UBI/UBIFS config options */
 255 #define CONFIG_LZO
 256 #define CONFIG_MTD_DEVICE
 257 #define CONFIG_MTD_PARTITIONS
 258 #define CONFIG_RBTREE
 259 #define CONFIG_CMD_MTDPARTS
 260 #define CONFIG_CMD_UBI
 261 #define CONFIG_CMD_UBIFS
 262
 263 #define CONFIG_OF_LIBFDT
 264 #define CONFIG_CMD_BOOTZ
 265
 266 #ifndef CONFIG_SYS_DCACHE_OFF
 267 #define CONFIG_CMD_CACHE
 268 #endif
 269
 270 #endif                         /* __CONFIG_H */