include/configs/tk71.h

   1 /*
   2  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
   3  * on behalf of DENX Software Engineering GmbH
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_TK71_H__
   9 #define __CONFIG_TK71_H__
  10
  11 /*
  12  * Version number information
  13  */
  14 #define CONFIG_IDENT_STRING     "\nKa-Ro TK71"
  15
  16 /*
  17  * High Level Configuration Options (easy to change)
  18  */
  19 #define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  20 #define CONFIG_KW88F6281        1       /* SOC Name */
  21 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  22 #define CONFIG_NR_DRAM_BANKS    1
  23
  24 #define MACH_TYPE_TK71          2399
  25 #define CONFIG_MACH_TYPE        MACH_TYPE_TK71
  26
  27 /*
  28  * Commands configuration
  29  */
  30 #define CONFIG_SYS_HUSH_PARSER
  31
  32 #define CONFIG_SYS_NO_FLASH
  33 #define CONFIG_DOS_PARTITION
  34 #define CONFIG_SUPPORT_VFAT
  35
  36 #define CONFIG_CMD_DHCP
  37 #define CONFIG_CMD_ENV
  38 #define CONFIG_CMD_EXT2
  39 #define CONFIG_CMD_FAT
  40 #define CONFIG_CMD_MTDPARTS
  41 #define CONFIG_CMD_NAND
  42 #define CONFIG_CMD_PING
  43 #define CONFIG_CMD_USB
  44
  45 /*
  46  * mv-common.h should be defined after CMD configs since it used them
  47  * to enable certain macros
  48  */
  49 #include "mv-common.h"
  50
  51 /*
  52  * NAND flash
  53  */
  54 #ifdef CONFIG_CMD_NAND
  55 #define CONFIG_MTD_DEVICE
  56 #define CONFIG_MTD_PARTITIONS
  57 #define CONFIG_JFFS2_NAND
  58 #define CONFIG_JFFS2_DEV                "nand0,3"
  59 #endif
  60
  61 /*
  62  * Ethernet Driver configuration
  63  */
  64 #ifdef CONFIG_CMD_NET
  65 #define CONFIG_MVGBE_PORTS      {1, 0}
  66 #define CONFIG_PHY_BASE_ADR     0x08
  67 #endif
  68
  69 /*
  70  * USB/EHCI
  71  */
  72 #ifdef CONFIG_CMD_USB
  73 #define CONFIG_USB_EHCI
  74 #define CONFIG_USB_EHCI_KIRKWOOD
  75 #define CONFIG_EHCI_IS_TDI
  76 #define CONFIG_USB_STORAGE
  77 #endif
  78
  79 /*
  80  *  Environment variables configurations
  81  */
  82 #ifdef CONFIG_CMD_NAND
  83 #define CONFIG_ENV_IS_IN_NAND
  84 #define CONFIG_ENV_SECT_SIZE            0x20000
  85 #else
  86 #define CONFIG_ENV_IS_NOWHERE
  87 #endif
  88
  89 #define CONFIG_ENV_SIZE                 0x20000
  90 #define CONFIG_ENV_ADDR                 0x80000
  91 #define CONFIG_ENV_OFFSET               0x80000
  92
  93 /*
  94  * Default environment variables
  95  */
  96 #define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;"
  97 #define CONFIG_MTDPARTS         "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)"
  98 #define CONFIG_EXTRA_ENV_SETTINGS \
  99         "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \
 100         "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \
 101         "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \
 102         "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \
 103         "mtdids=nand0=orion_nand\0" \
 104         "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \
 105         "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0"
 106 #define MTDIDS_DEFAULT                  "nand0=orion_nand"
 107 #define MTDPARTS_DEFAULT                "mtdparts=orion_nand:"CONFIG_MTDPARTS
 108
 109 #define PHYS_SDRAM_1            0x00000000      /* Base address */
 110 #define PHYS_SDRAM_1_SIZE       0x20000000      /* Max 512 MB RAM */
 111
 112 #endif  /* __CONFIG_TK71_H__ */