include/configs/uc101.h

   1 /*
   2  * (C) Copyright 2003-2009
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 /*
  12  * High Level Configuration Options
  13  * (easy to change)
  14  */
  15
  16 #define CONFIG_UC101            1       /* UC101 board          */
  17 #define CONFIG_HOSTNAME         uc101
  18
  19 #ifndef CONFIG_SYS_TEXT_BASE
  20 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  21 #endif
  22 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds"
  23
  24 #include "manroland/common.h"
  25 #include "manroland/mpc5200-common.h"
  26
  27 /*
  28  * Serial console configuration
  29  */
  30 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps    */
  31
  32 /*
  33  * BOOTP options
  34  */
  35 #define CONFIG_BOOTP_BOOTFILESIZE
  36 #define CONFIG_BOOTP_BOOTPATH
  37 #define CONFIG_BOOTP_GATEWAY
  38 #define CONFIG_BOOTP_HOSTNAME
  39
  40 /*
  41  * Flash configuration
  42  */
  43 #define CONFIG_SYS_MAX_FLASH_SECT       140
  44
  45 /*
  46  * Environment settings
  47  */
  48 #define CONFIG_ENV_SECT_SIZE    0x10000
  49
  50 /*
  51  * Memory map
  52  */
  53 #define CONFIG_SYS_IB_MASTER            0xc0510000      /* CS 6 */
  54 #define CONFIG_SYS_IB_EPLD              0xc0500000      /* CS 7 */
  55
  56 /* SRAM */
  57 #define CONFIG_SYS_SRAM_SIZE    0x200000
  58
  59 /*
  60  * GPIO configuration
  61  */
  62 #define CONFIG_SYS_GPS_PORT_CONFIG      0x4d558044
  63
  64 #define CONFIG_SYS_MEMTEST_START        0x00300000
  65 #define CONFIG_SYS_MEMTEST_END          0x00f00000
  66
  67 #define CONFIG_SYS_LOAD_ADDR            0x300000
  68
  69 #define CONFIG_SYS_BOOTCS_CFG           0x00045D00
  70
  71 /* 8Mbit SRAM @0x80100000 */
  72 #define CONFIG_SYS_CS1_SIZE             0x00200000
  73 #define CONFIG_SYS_CS1_CFG              0x21D00
  74
  75 /* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */
  76 #define CONFIG_SYS_CS3_START            CONFIG_SYS_DISPLAY_BASE
  77 #define CONFIG_SYS_CS3_SIZE             0x00000100
  78 #define CONFIG_SYS_CS3_CFG              0x00081802
  79
  80 /* Interbus Master 16 Bit */
  81 #define CONFIG_SYS_CS6_START            CONFIG_SYS_IB_MASTER
  82 #define CONFIG_SYS_CS6_SIZE             0x00010000
  83 #define CONFIG_SYS_CS6_CFG              0x00FF3500
  84
  85 /* Interbus EPLD 8 Bit */
  86 #define CONFIG_SYS_CS7_START            CONFIG_SYS_IB_EPLD
  87 #define CONFIG_SYS_CS7_SIZE             0x00010000
  88 #define CONFIG_SYS_CS7_CFG              0x00081800
  89
  90 /*-----------------------------------------------------------------------
  91  * IDE/ATA stuff Supports IDE harddisk
  92  *-----------------------------------------------------------------------
  93  */
  94
  95 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 2 drives per IDE bus*/
  96
  97 /*---------------------------------------------------------------------*/
  98 /* Display addresses                                                   */
  99 /*---------------------------------------------------------------------*/
 100 #define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38)
 101 #define CONFIG_SYS_DISP_CWORD           (CONFIG_SYS_DISPLAY_BASE + 0x30)
 102
 103 #endif /* __CONFIG_H */