include/configs/udoo.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for Udoo board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/imx-common/gpio.h>
  14 #include <asm/sizes.h>
  15
  16 #define CONFIG_MX6
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #define MACH_TYPE_UDOO          4800
  21 #define CONFIG_MACH_TYPE        MACH_TYPE_UDOO
  22
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27
  28 /* Size of malloc() pool */
  29 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  30
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_MXC_GPIO
  33
  34 #define CONFIG_MXC_UART
  35 #define CONFIG_MXC_UART_BASE            UART2_BASE
  36
  37 /* SATA Configs */
  38
  39 #define CONFIG_CMD_SATA
  40 #ifdef CONFIG_CMD_SATA
  41 #define CONFIG_DWC_AHSATA
  42 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  43 #define CONFIG_DWC_AHSATA_PORT_ID       0
  44 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  45 #define CONFIG_LBA48
  46 #define CONFIG_LIBATA
  47 #endif
  48
  49 /* Network support */
  50
  51 #define CONFIG_CMD_PING
  52 #define CONFIG_CMD_DHCP
  53 #define CONFIG_CMD_MII
  54 #define CONFIG_CMD_NET
  55 #define CONFIG_FEC_MXC
  56 #define CONFIG_MII
  57 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  58 #define CONFIG_FEC_XCV_TYPE             RGMII
  59 #define CONFIG_ETHPRIME                 "FEC"
  60 #define CONFIG_FEC_MXC_PHYADDR          6
  61 #define CONFIG_PHYLIB
  62 #define CONFIG_PHY_MICREL
  63 #define CONFIG_PHY_MICREL_KSZ9031
  64
  65 /* allow to overwrite serial and ethaddr */
  66 #define CONFIG_ENV_OVERWRITE
  67 #define CONFIG_CONS_INDEX               1
  68 #define CONFIG_BAUDRATE                 115200
  69
  70 /* Command definition */
  71 #include <config_cmd_default.h>
  72
  73 #undef CONFIG_CMD_IMLS
  74
  75 #define CONFIG_CMD_BMODE
  76 #define CONFIG_CMD_SETEXPR
  77
  78 #define CONFIG_BOOTDELAY                3
  79
  80 #define CONFIG_SYS_MEMTEST_START        0x10000000
  81 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  82 #define CONFIG_LOADADDR                 0x12000000
  83 #define CONFIG_SYS_TEXT_BASE            0x17800000
  84
  85 /* MMC Configuration */
  86 #define CONFIG_FSL_ESDHC
  87 #define CONFIG_FSL_USDHC
  88 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  89
  90 #define CONFIG_MMC
  91 #define CONFIG_CMD_MMC
  92 #define CONFIG_GENERIC_MMC
  93 #define CONFIG_BOUNCE_BUFFER
  94 #define CONFIG_CMD_EXT2
  95 #define CONFIG_CMD_FAT
  96 #define CONFIG_DOS_PARTITION
  97
  98 #define CONFIG_DEFAULT_FDT_FILE         "imx6q-udoo.dtb"
  99
 100 #define CONFIG_EXTRA_ENV_SETTINGS \
 101         "script=boot.scr\0" \
 102         "uimage=uImage\0" \
 103         "console=ttymxc1\0" \
 104         "splashpos=m,m\0" \
 105         "fdt_high=0xffffffff\0" \
 106         "initrd_high=0xffffffff\0" \
 107         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 108         "fdt_addr=0x11000000\0" \
 109         "boot_fdt=try\0" \
 110         "ip_dyn=yes\0" \
 111         "mmcdev=0\0" \
 112         "mmcpart=1\0" \
 113         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 114         "update_sd_firmware_filename=u-boot.imx\0" \
 115         "update_sd_firmware=" \
 116                 "if test ${ip_dyn} = yes; then " \
 117                         "setenv get_cmd dhcp; " \
 118                 "else " \
 119                         "setenv get_cmd tftp; " \
 120                 "fi; " \
 121                 "if mmc dev ${mmcdev}; then "   \
 122                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 123                                 "setexpr fw_sz ${filesize} / 0x200; " \
 124                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 125                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 126                         "fi; "  \
 127                 "fi\0" \
 128         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 129                 "root=${mmcroot}\0" \
 130         "loadbootscript=" \
 131                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 132         "bootscript=echo Running bootscript from mmc ...; " \
 133                 "source\0" \
 134         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 135         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 136         "mmcboot=echo Booting from mmc ...; " \
 137                 "run mmcargs; " \
 138                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 139                         "if run loadfdt; then " \
 140                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 141                         "else " \
 142                                 "if test ${boot_fdt} = try; then " \
 143                                         "bootm; " \
 144                                 "else " \
 145                                         "echo WARN: Cannot load the DT; " \
 146                                 "fi; " \
 147                         "fi; " \
 148                 "else " \
 149                         "bootm; " \
 150                 "fi;\0" \
 151         "netargs=setenv bootargs console=${console},${baudrate} " \
 152                 "root=/dev/nfs " \
 153         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 154                 "netboot=echo Booting from net ...; " \
 155                 "run netargs; " \
 156                 "if test ${ip_dyn} = yes; then " \
 157                         "setenv get_cmd dhcp; " \
 158                 "else " \
 159                         "setenv get_cmd tftp; " \
 160                 "fi; " \
 161                 "${get_cmd} ${uimage}; " \
 162                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 163                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 164                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 165                         "else " \
 166                                 "if test ${boot_fdt} = try; then " \
 167                                         "bootm; " \
 168                                 "else " \
 169                                         "echo WARN: Cannot load the DT; " \
 170                                 "fi; " \
 171                         "fi; " \
 172                 "else " \
 173                         "bootm; " \
 174                 "fi;\0"
 175
 176 #define CONFIG_BOOTCOMMAND \
 177            "mmc dev ${mmcdev}; if mmc rescan; then " \
 178                    "if run loadbootscript; then " \
 179                            "run bootscript; " \
 180                    "else " \
 181                            "if run loaduimage; then " \
 182                                    "run mmcboot; " \
 183                            "else run netboot; " \
 184                            "fi; " \
 185                    "fi; " \
 186            "else run netboot; fi"
 187
 188 /* Miscellaneous configurable options */
 189 #define CONFIG_SYS_LONGHELP
 190 #define CONFIG_SYS_HUSH_PARSER
 191 #define CONFIG_SYS_PROMPT              "=> "
 192 #define CONFIG_AUTO_COMPLETE
 193 #define CONFIG_SYS_CBSIZE               256
 194
 195 /* Print Buffer Size */
 196 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 197 #define CONFIG_SYS_MAXARGS             16
 198 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 199
 200 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 201 #define CONFIG_SYS_HZ                   1000
 202
 203 #define CONFIG_CMDLINE_EDITING
 204
 205 /* Physical Memory Map */
 206 #define CONFIG_NR_DRAM_BANKS            1
 207 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 208
 209 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 210 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 211 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 212
 213 #define CONFIG_SYS_INIT_SP_OFFSET \
 214         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 215 #define CONFIG_SYS_INIT_SP_ADDR \
 216         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 217
 218 /* FLASH and environment organization */
 219 #define CONFIG_SYS_NO_FLASH
 220
 221 #define CONFIG_ENV_SIZE                 (8 * 1024)
 222
 223 #define CONFIG_ENV_IS_IN_MMC
 224 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 225 #define CONFIG_SYS_MMC_ENV_DEV          0
 226
 227 #define CONFIG_OF_LIBFDT
 228 #define CONFIG_CMD_BOOTZ
 229
 230 #ifndef CONFIG_SYS_DCACHE_OFF
 231 #define CONFIG_CMD_CACHE
 232 #endif
 233
 234 #endif                         /* __CONFIG_H * */