include/configs/udoo.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for Udoo board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define MACH_TYPE_UDOO          4800
  15 #define CONFIG_MACH_TYPE        MACH_TYPE_UDOO
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  19
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21
  22 #define CONFIG_MXC_UART
  23 #define CONFIG_MXC_UART_BASE            UART2_BASE
  24
  25 /* SATA Configs */
  26
  27 #define CONFIG_CMD_SATA
  28 #ifdef CONFIG_CMD_SATA
  29 #define CONFIG_DWC_AHSATA
  30 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  31 #define CONFIG_DWC_AHSATA_PORT_ID       0
  32 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  33 #define CONFIG_LBA48
  34 #define CONFIG_LIBATA
  35 #endif
  36
  37 /* Network support */
  38
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_DHCP
  41 #define CONFIG_CMD_MII
  42 #define CONFIG_CMD_NET
  43 #define CONFIG_FEC_MXC
  44 #define CONFIG_MII
  45 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  46 #define CONFIG_FEC_XCV_TYPE             RGMII
  47 #define CONFIG_ETHPRIME                 "FEC"
  48 #define CONFIG_FEC_MXC_PHYADDR          6
  49 #define CONFIG_PHYLIB
  50 #define CONFIG_PHY_MICREL
  51 #define CONFIG_PHY_MICREL_KSZ9031
  52
  53 /* Command definition */
  54 #define CONFIG_CMD_BMODE
  55 #define CONFIG_CMD_SETEXPR
  56
  57 #define CONFIG_SYS_MEMTEST_START        0x10000000
  58 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  59
  60 /* MMC Configuration */
  61 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  62
  63 #define CONFIG_DEFAULT_FDT_FILE         "imx6q-udoo.dtb"
  64
  65 #define CONFIG_EXTRA_ENV_SETTINGS \
  66         "script=boot.scr\0" \
  67         "image=zImage\0" \
  68         "console=ttymxc1\0" \
  69         "splashpos=m,m\0" \
  70         "fdt_high=0xffffffff\0" \
  71         "initrd_high=0xffffffff\0" \
  72         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  73         "fdt_addr=0x18000000\0" \
  74         "boot_fdt=try\0" \
  75         "ip_dyn=yes\0" \
  76         "mmcdev=0\0" \
  77         "mmcpart=1\0" \
  78         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  79         "update_sd_firmware_filename=u-boot.imx\0" \
  80         "update_sd_firmware=" \
  81                 "if test ${ip_dyn} = yes; then " \
  82                         "setenv get_cmd dhcp; " \
  83                 "else " \
  84                         "setenv get_cmd tftp; " \
  85                 "fi; " \
  86                 "if mmc dev ${mmcdev}; then "   \
  87                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  88                                 "setexpr fw_sz ${filesize} / 0x200; " \
  89                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  90                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  91                         "fi; "  \
  92                 "fi\0" \
  93         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  94                 "root=${mmcroot}\0" \
  95         "loadbootscript=" \
  96                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  97         "bootscript=echo Running bootscript from mmc ...; " \
  98                 "source\0" \
  99         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 100         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 101         "mmcboot=echo Booting from mmc ...; " \
 102                 "run mmcargs; " \
 103                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 104                         "if run loadfdt; then " \
 105                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 106                         "else " \
 107                                 "if test ${boot_fdt} = try; then " \
 108                                         "bootz; " \
 109                                 "else " \
 110                                         "echo WARN: Cannot load the DT; " \
 111                                 "fi; " \
 112                         "fi; " \
 113                 "else " \
 114                         "bootz; " \
 115                 "fi;\0" \
 116         "netargs=setenv bootargs console=${console},${baudrate} " \
 117                 "root=/dev/nfs " \
 118         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 119                 "netboot=echo Booting from net ...; " \
 120                 "run netargs; " \
 121                 "if test ${ip_dyn} = yes; then " \
 122                         "setenv get_cmd dhcp; " \
 123                 "else " \
 124                         "setenv get_cmd tftp; " \
 125                 "fi; " \
 126                 "${get_cmd} ${image}; " \
 127                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 128                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 129                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 130                         "else " \
 131                                 "if test ${boot_fdt} = try; then " \
 132                                         "bootz; " \
 133                                 "else " \
 134                                         "echo WARN: Cannot load the DT; " \
 135                                 "fi; " \
 136                         "fi; " \
 137                 "else " \
 138                         "bootz; " \
 139                 "fi;\0"
 140
 141 #define CONFIG_BOOTCOMMAND \
 142            "mmc dev ${mmcdev}; if mmc rescan; then " \
 143                    "if run loadbootscript; then " \
 144                            "run bootscript; " \
 145                    "else " \
 146                            "if run loadimage; then " \
 147                                    "run mmcboot; " \
 148                            "else run netboot; " \
 149                            "fi; " \
 150                    "fi; " \
 151            "else run netboot; fi"
 152
 153 /* Print Buffer Size */
 154 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 155
 156 /* Physical Memory Map */
 157 #define CONFIG_NR_DRAM_BANKS            1
 158 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 159
 160 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 161 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 162 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 163
 164 #define CONFIG_SYS_INIT_SP_OFFSET \
 165         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 166 #define CONFIG_SYS_INIT_SP_ADDR \
 167         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 168
 169 /* Environment organization */
 170 #define CONFIG_ENV_SIZE                 (8 * 1024)
 171
 172 #define CONFIG_ENV_IS_IN_MMC
 173 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 174 #define CONFIG_SYS_MMC_ENV_DEV          0
 175
 176 #endif                         /* __CONFIG_H * */