include/configs/udoo.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for Udoo board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define MACH_TYPE_UDOO          4800
  15 #define CONFIG_MACH_TYPE        MACH_TYPE_UDOO
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  19
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21
  22 #define CONFIG_MXC_UART
  23 #define CONFIG_MXC_UART_BASE            UART2_BASE
  24
  25 /* SATA Configs */
  26
  27 #define CONFIG_CMD_SATA
  28 #ifdef CONFIG_CMD_SATA
  29 #define CONFIG_DWC_AHSATA
  30 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  31 #define CONFIG_DWC_AHSATA_PORT_ID       0
  32 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  33 #define CONFIG_LBA48
  34 #define CONFIG_LIBATA
  35 #endif
  36
  37 /* Network support */
  38
  39 #define CONFIG_CMD_PING
  40 #define CONFIG_CMD_DHCP
  41 #define CONFIG_CMD_MII
  42 #define CONFIG_CMD_NET
  43 #define CONFIG_FEC_MXC
  44 #define CONFIG_MII
  45 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  46 #define CONFIG_FEC_XCV_TYPE             RGMII
  47 #define CONFIG_ETHPRIME                 "FEC"
  48 #define CONFIG_FEC_MXC_PHYADDR          6
  49 #define CONFIG_PHYLIB
  50 #define CONFIG_PHY_MICREL
  51 #define CONFIG_PHY_MICREL_KSZ9031
  52
  53 /* Command definition */
  54 #define CONFIG_CMD_BMODE
  55 #define CONFIG_CMD_SETEXPR
  56
  57 #define CONFIG_SYS_MEMTEST_START        0x10000000
  58 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  59
  60 /* MMC Configuration */
  61 #define CONFIG_FSL_ESDHC
  62 #define CONFIG_FSL_USDHC
  63 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  64
  65 #define CONFIG_MMC
  66 #define CONFIG_CMD_MMC
  67 #define CONFIG_GENERIC_MMC
  68 #define CONFIG_BOUNCE_BUFFER
  69
  70 #define CONFIG_DEFAULT_FDT_FILE         "imx6q-udoo.dtb"
  71
  72 #define CONFIG_EXTRA_ENV_SETTINGS \
  73         "script=boot.scr\0" \
  74         "image=zImage\0" \
  75         "console=ttymxc1\0" \
  76         "splashpos=m,m\0" \
  77         "fdt_high=0xffffffff\0" \
  78         "initrd_high=0xffffffff\0" \
  79         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  80         "fdt_addr=0x18000000\0" \
  81         "boot_fdt=try\0" \
  82         "ip_dyn=yes\0" \
  83         "mmcdev=0\0" \
  84         "mmcpart=1\0" \
  85         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  86         "update_sd_firmware_filename=u-boot.imx\0" \
  87         "update_sd_firmware=" \
  88                 "if test ${ip_dyn} = yes; then " \
  89                         "setenv get_cmd dhcp; " \
  90                 "else " \
  91                         "setenv get_cmd tftp; " \
  92                 "fi; " \
  93                 "if mmc dev ${mmcdev}; then "   \
  94                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  95                                 "setexpr fw_sz ${filesize} / 0x200; " \
  96                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  97                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  98                         "fi; "  \
  99                 "fi\0" \
 100         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 101                 "root=${mmcroot}\0" \
 102         "loadbootscript=" \
 103                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 104         "bootscript=echo Running bootscript from mmc ...; " \
 105                 "source\0" \
 106         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 107         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 108         "mmcboot=echo Booting from mmc ...; " \
 109                 "run mmcargs; " \
 110                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 111                         "if run loadfdt; then " \
 112                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 113                         "else " \
 114                                 "if test ${boot_fdt} = try; then " \
 115                                         "bootz; " \
 116                                 "else " \
 117                                         "echo WARN: Cannot load the DT; " \
 118                                 "fi; " \
 119                         "fi; " \
 120                 "else " \
 121                         "bootz; " \
 122                 "fi;\0" \
 123         "netargs=setenv bootargs console=${console},${baudrate} " \
 124                 "root=/dev/nfs " \
 125         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 126                 "netboot=echo Booting from net ...; " \
 127                 "run netargs; " \
 128                 "if test ${ip_dyn} = yes; then " \
 129                         "setenv get_cmd dhcp; " \
 130                 "else " \
 131                         "setenv get_cmd tftp; " \
 132                 "fi; " \
 133                 "${get_cmd} ${image}; " \
 134                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 135                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 136                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 137                         "else " \
 138                                 "if test ${boot_fdt} = try; then " \
 139                                         "bootz; " \
 140                                 "else " \
 141                                         "echo WARN: Cannot load the DT; " \
 142                                 "fi; " \
 143                         "fi; " \
 144                 "else " \
 145                         "bootz; " \
 146                 "fi;\0"
 147
 148 #define CONFIG_BOOTCOMMAND \
 149            "mmc dev ${mmcdev}; if mmc rescan; then " \
 150                    "if run loadbootscript; then " \
 151                            "run bootscript; " \
 152                    "else " \
 153                            "if run loadimage; then " \
 154                                    "run mmcboot; " \
 155                            "else run netboot; " \
 156                            "fi; " \
 157                    "fi; " \
 158            "else run netboot; fi"
 159
 160 /* Print Buffer Size */
 161 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 162
 163 /* Physical Memory Map */
 164 #define CONFIG_NR_DRAM_BANKS            1
 165 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 166
 167 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 168 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 169 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 170
 171 #define CONFIG_SYS_INIT_SP_OFFSET \
 172         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 173 #define CONFIG_SYS_INIT_SP_ADDR \
 174         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 175
 176 /* Environment organization */
 177 #define CONFIG_ENV_SIZE                 (8 * 1024)
 178
 179 #define CONFIG_ENV_IS_IN_MMC
 180 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 181 #define CONFIG_SYS_MMC_ENV_DEV          0
 182
 183 #ifndef CONFIG_SYS_DCACHE_OFF
 184 #define CONFIG_CMD_CACHE
 185 #endif
 186
 187 #endif                         /* __CONFIG_H * */