include/configs/udoo.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for Udoo board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define MACH_TYPE_UDOO          4800
  15 #define CONFIG_MACH_TYPE        MACH_TYPE_UDOO
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  19
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_MXC_GPIO
  22
  23 #define CONFIG_MXC_UART
  24 #define CONFIG_MXC_UART_BASE            UART2_BASE
  25
  26 /* SATA Configs */
  27
  28 #define CONFIG_CMD_SATA
  29 #ifdef CONFIG_CMD_SATA
  30 #define CONFIG_DWC_AHSATA
  31 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  32 #define CONFIG_DWC_AHSATA_PORT_ID       0
  33 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  34 #define CONFIG_LBA48
  35 #define CONFIG_LIBATA
  36 #endif
  37
  38 /* Network support */
  39
  40 #define CONFIG_CMD_PING
  41 #define CONFIG_CMD_DHCP
  42 #define CONFIG_CMD_MII
  43 #define CONFIG_CMD_NET
  44 #define CONFIG_FEC_MXC
  45 #define CONFIG_MII
  46 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  47 #define CONFIG_FEC_XCV_TYPE             RGMII
  48 #define CONFIG_ETHPRIME                 "FEC"
  49 #define CONFIG_FEC_MXC_PHYADDR          6
  50 #define CONFIG_PHYLIB
  51 #define CONFIG_PHY_MICREL
  52 #define CONFIG_PHY_MICREL_KSZ9031
  53
  54 /* allow to overwrite serial and ethaddr */
  55 #define CONFIG_ENV_OVERWRITE
  56 #define CONFIG_CONS_INDEX               1
  57 #define CONFIG_BAUDRATE                 115200
  58
  59 /* Command definition */
  60
  61 #define CONFIG_CMD_BMODE
  62 #define CONFIG_CMD_SETEXPR
  63
  64 #define CONFIG_BOOTDELAY                3
  65
  66 #define CONFIG_SYS_MEMTEST_START        0x10000000
  67 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  68 #define CONFIG_LOADADDR                 0x12000000
  69 #define CONFIG_SYS_TEXT_BASE            0x17800000
  70
  71 /* MMC Configuration */
  72 #define CONFIG_FSL_ESDHC
  73 #define CONFIG_FSL_USDHC
  74 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  75
  76 #define CONFIG_MMC
  77 #define CONFIG_CMD_MMC
  78 #define CONFIG_GENERIC_MMC
  79 #define CONFIG_BOUNCE_BUFFER
  80 #define CONFIG_CMD_EXT2
  81 #define CONFIG_CMD_FAT
  82 #define CONFIG_DOS_PARTITION
  83
  84 #define CONFIG_DEFAULT_FDT_FILE         "imx6q-udoo.dtb"
  85
  86 #define CONFIG_EXTRA_ENV_SETTINGS \
  87         "script=boot.scr\0" \
  88         "image=zImage\0" \
  89         "console=ttymxc1\0" \
  90         "splashpos=m,m\0" \
  91         "fdt_high=0xffffffff\0" \
  92         "initrd_high=0xffffffff\0" \
  93         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
  94         "fdt_addr=0x18000000\0" \
  95         "boot_fdt=try\0" \
  96         "ip_dyn=yes\0" \
  97         "mmcdev=0\0" \
  98         "mmcpart=1\0" \
  99         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 100         "update_sd_firmware_filename=u-boot.imx\0" \
 101         "update_sd_firmware=" \
 102                 "if test ${ip_dyn} = yes; then " \
 103                         "setenv get_cmd dhcp; " \
 104                 "else " \
 105                         "setenv get_cmd tftp; " \
 106                 "fi; " \
 107                 "if mmc dev ${mmcdev}; then "   \
 108                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 109                                 "setexpr fw_sz ${filesize} / 0x200; " \
 110                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 111                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 112                         "fi; "  \
 113                 "fi\0" \
 114         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 115                 "root=${mmcroot}\0" \
 116         "loadbootscript=" \
 117                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 118         "bootscript=echo Running bootscript from mmc ...; " \
 119                 "source\0" \
 120         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 121         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 122         "mmcboot=echo Booting from mmc ...; " \
 123                 "run mmcargs; " \
 124                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 125                         "if run loadfdt; then " \
 126                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 127                         "else " \
 128                                 "if test ${boot_fdt} = try; then " \
 129                                         "bootz; " \
 130                                 "else " \
 131                                         "echo WARN: Cannot load the DT; " \
 132                                 "fi; " \
 133                         "fi; " \
 134                 "else " \
 135                         "bootz; " \
 136                 "fi;\0" \
 137         "netargs=setenv bootargs console=${console},${baudrate} " \
 138                 "root=/dev/nfs " \
 139         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 140                 "netboot=echo Booting from net ...; " \
 141                 "run netargs; " \
 142                 "if test ${ip_dyn} = yes; then " \
 143                         "setenv get_cmd dhcp; " \
 144                 "else " \
 145                         "setenv get_cmd tftp; " \
 146                 "fi; " \
 147                 "${get_cmd} ${image}; " \
 148                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 149                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 150                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 151                         "else " \
 152                                 "if test ${boot_fdt} = try; then " \
 153                                         "bootz; " \
 154                                 "else " \
 155                                         "echo WARN: Cannot load the DT; " \
 156                                 "fi; " \
 157                         "fi; " \
 158                 "else " \
 159                         "bootz; " \
 160                 "fi;\0"
 161
 162 #define CONFIG_BOOTCOMMAND \
 163            "mmc dev ${mmcdev}; if mmc rescan; then " \
 164                    "if run loadbootscript; then " \
 165                            "run bootscript; " \
 166                    "else " \
 167                            "if run loadimage; then " \
 168                                    "run mmcboot; " \
 169                            "else run netboot; " \
 170                            "fi; " \
 171                    "fi; " \
 172            "else run netboot; fi"
 173
 174 /* Miscellaneous configurable options */
 175 #define CONFIG_SYS_LONGHELP
 176 #define CONFIG_SYS_HUSH_PARSER
 177 #define CONFIG_AUTO_COMPLETE
 178 #define CONFIG_SYS_CBSIZE               256
 179
 180 /* Print Buffer Size */
 181 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 182 #define CONFIG_SYS_MAXARGS             16
 183 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 184
 185 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 186
 187 #define CONFIG_CMDLINE_EDITING
 188
 189 /* Physical Memory Map */
 190 #define CONFIG_NR_DRAM_BANKS            1
 191 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 192
 193 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 194 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 195 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 196
 197 #define CONFIG_SYS_INIT_SP_OFFSET \
 198         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 199 #define CONFIG_SYS_INIT_SP_ADDR \
 200         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 201
 202 /* Environment organization */
 203 #define CONFIG_ENV_SIZE                 (8 * 1024)
 204
 205 #define CONFIG_ENV_IS_IN_MMC
 206 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 207 #define CONFIG_SYS_MMC_ENV_DEV          0
 208
 209 #define CONFIG_OF_LIBFDT
 210 #define CONFIG_CMD_BOOTZ
 211
 212 #ifndef CONFIG_SYS_DCACHE_OFF
 213 #define CONFIG_CMD_CACHE
 214 #endif
 215
 216 #endif                         /* __CONFIG_H * */