]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/udoo_neo.h
Merge git://git.denx.de/u-boot-fsl-qoriq
[people/ms/u-boot.git] / include / configs / udoo_neo.h
1 /*
2 * Copyright 2014-2015 Freescale Semiconductor, Inc.
3 * Copyright Jasbir Matharu
4 * Copyright 2015 UDOO Team
5 *
6 * Configuration settings for the UDOO NEO board.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #include <config_distro_defaults.h>
15 #include "mx6_common.h"
16
17 #include "imx6_spl.h"
18
19 /* Size of malloc() pool */
20 #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M)
21 #define CONFIG_MXC_UART
22
23 /* MMC Configuration */
24 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
25
26 /* Command definition */
27 #define CONFIG_MXC_UART_BASE UART1_BASE
28 #define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC2*/
29
30 /* Linux only */
31 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
32 #define CONFIG_EXTRA_ENV_SETTINGS \
33 "fdt_high=0xffffffff\0" \
34 "initrd_high=0xffffffff\0" \
35 "fdtfile=undefined\0" \
36 "fdt_addr=0x83000000\0" \
37 "fdt_addr_r=0x83000000\0" \
38 "ip_dyn=yes\0" \
39 "mmcdev=0\0" \
40 "mmcrootfstype=ext4\0" \
41 "findfdt="\
42 "if test $board_name = BASIC; then " \
43 "setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
44 "if test $board_name = BASICKS; then " \
45 "setenv fdtfile imx6sx-udoo-neo-basic.dtb; fi; " \
46 "if test $board_name = FULL; then " \
47 "setenv fdtfile imx6sx-udoo-neo-full.dtb; fi; " \
48 "if test $board_name = EXTENDED; then " \
49 "setenv fdtfile imx6sx-udoo-neo-extended.dtb; fi; " \
50 "if test $fdtfile = UNDEFINED; then " \
51 "echo WARNING: Could not determine dtb to use; fi\0" \
52 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
53 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
54 "ramdisk_addr_r=0x83000000\0" \
55 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
56 BOOTENV
57
58 #define BOOT_TARGET_DEVICES(func) \
59 func(MMC, mmc, 0) \
60 func(DHCP, dhcp, na)
61
62 #define CONFIG_BOOTCOMMAND \
63 "run findfdt; " \
64 "run distro_bootcmd"
65
66 #include <config_distro_bootcmd.h>
67
68 /* Miscellaneous configurable options */
69 #define CONFIG_SYS_MEMTEST_START 0x80000000
70 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
71 #define CONFIG_STACKSIZE SZ_128K
72
73 /* Physical Memory Map */
74 #define CONFIG_NR_DRAM_BANKS 1
75 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
76 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
77 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
78 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
79
80 #define CONFIG_SYS_INIT_SP_OFFSET \
81 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
82 #define CONFIG_SYS_INIT_SP_ADDR \
83 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
84
85 /* Environment organization */
86 #define CONFIG_ENV_OFFSET (8 * SZ_64K)
87 #define CONFIG_ENV_SIZE SZ_8K
88 #define CONFIG_ENV_IS_IN_MMC
89
90 #define CONFIG_IMX_THERMAL
91
92 /* I2C configs */
93 #define CONFIG_SYS_I2C
94 #define CONFIG_SYS_I2C_MXC
95 #define CONFIG_SYS_I2C_MXC_I2C1
96 #define CONFIG_SYS_I2C_SPEED 100000
97
98 /* PMIC */
99 #define CONFIG_POWER
100 #define CONFIG_POWER_I2C
101 #define CONFIG_POWER_PFUZE3000
102 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
103 #define PFUZE3000_I2C_BUS 0
104
105 /* Network */
106 #define CONFIG_FEC_MXC
107 #define CONFIG_MII
108
109 #define CONFIG_FEC_ENET_DEV 0
110 #define IMX_FEC_BASE ENET_BASE_ADDR
111 #define CONFIG_FEC_MXC_PHYADDR 0x0
112
113 #define CONFIG_FEC_XCV_TYPE RMII
114 #define CONFIG_ETHPRIME "FEC0"
115
116 #define CONFIG_PHYLIB
117 #define CONFIG_PHY_MICREL
118
119 #endif /* __CONFIG_H */