]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/uniphier.h
autoboot: remove CONFIG_ZERO_BOOTDELAY_CHECK
[people/ms/u-boot.git] / include / configs / uniphier.h
1 /*
2 * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 /* U-Boot - Common settings for UniPhier Family */
8
9 #ifndef __CONFIG_UNIPHIER_COMMON_H__
10 #define __CONFIG_UNIPHIER_COMMON_H__
11
12 #define CONFIG_I2C_EEPROM
13 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
14
15 #define CONFIG_SMC911X
16
17 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
18 #define CONFIG_SMC911X_BASE 0
19 #define CONFIG_SMC911X_32_BIT
20
21 /*-----------------------------------------------------------------------
22 * MMU and Cache Setting
23 *----------------------------------------------------------------------*/
24
25 /* Comment out the following to enable L1 cache */
26 /* #define CONFIG_SYS_ICACHE_OFF */
27 /* #define CONFIG_SYS_DCACHE_OFF */
28
29 #define CONFIG_SYS_CACHELINE_SIZE 32
30
31 /* Comment out the following to disable L2 cache */
32 #define CONFIG_UNIPHIER_L2CACHE_ON
33
34 #define CONFIG_DISPLAY_CPUINFO
35 #define CONFIG_DISPLAY_BOARDINFO
36 #define CONFIG_MISC_INIT_F
37 #define CONFIG_BOARD_EARLY_INIT_F
38 #define CONFIG_BOARD_EARLY_INIT_R
39 #define CONFIG_BOARD_LATE_INIT
40
41 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
42
43 #define CONFIG_TIMESTAMP
44
45 /* FLASH related */
46 #define CONFIG_MTD_DEVICE
47
48 /*
49 * uncomment the following to disable FLASH related code.
50 */
51 /* #define CONFIG_SYS_NO_FLASH */
52
53 #define CONFIG_FLASH_CFI_DRIVER
54 #define CONFIG_SYS_FLASH_CFI
55
56 #define CONFIG_SYS_MAX_FLASH_SECT 256
57 #define CONFIG_SYS_MONITOR_BASE 0
58 #define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */
59 #define CONFIG_SYS_FLASH_BASE 0
60
61 /*
62 * flash_toggle does not work for out supoort card.
63 * We need to use flash_status_poll.
64 */
65 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
66
67 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
68
69 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
70
71 /* serial console configuration */
72 #define CONFIG_BAUDRATE 115200
73
74 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
75 #define CONFIG_USE_ARCH_MEMSET
76 #define CONFIG_USE_ARCH_MEMCPY
77 #endif
78
79 #define CONFIG_SYS_LONGHELP /* undef to save memory */
80
81 #define CONFIG_CMDLINE_EDITING /* add command line history */
82 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
83 /* Print Buffer Size */
84 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
85 #define CONFIG_SYS_MAXARGS 16 /* max number of command */
86 /* Boot Argument Buffer Size */
87 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
88
89 #define CONFIG_CONS_INDEX 1
90
91 /* #define CONFIG_ENV_IS_NOWHERE */
92 /* #define CONFIG_ENV_IS_IN_NAND */
93 #define CONFIG_ENV_IS_IN_MMC
94 #define CONFIG_ENV_OFFSET 0x80000
95 #define CONFIG_ENV_SIZE 0x2000
96 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
97
98 #define CONFIG_SYS_MMC_ENV_DEV 0
99 #define CONFIG_SYS_MMC_ENV_PART 1
100
101 #ifdef CONFIG_ARM64
102 #define CPU_RELEASE_ADDR 0x80000000
103 #define COUNTER_FREQUENCY 50000000
104 #define CONFIG_GICV3
105 #define GICD_BASE 0x5fe00000
106 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
107 #define GICR_BASE 0x5fe40000
108 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
109 #define GICR_BASE 0x5fe80000
110 #endif
111 #else
112 /* Time clock 1MHz */
113 #define CONFIG_SYS_TIMER_RATE 1000000
114 #endif
115
116
117 #define CONFIG_SYS_MAX_NAND_DEVICE 1
118 #define CONFIG_SYS_NAND_MAX_CHIPS 2
119 #define CONFIG_SYS_NAND_ONFI_DETECTION
120
121 #define CONFIG_NAND_DENALI_ECC_SIZE 1024
122
123 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
124 #define CONFIG_SYS_NAND_REGS_BASE 0xf8100000
125 #define CONFIG_SYS_NAND_DATA_BASE 0xf8000000
126 #else
127 #define CONFIG_SYS_NAND_REGS_BASE 0x68100000
128 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000
129 #endif
130
131 #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
132
133 #define CONFIG_SYS_NAND_USE_FLASH_BBT
134 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
135
136 /* USB */
137 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
138 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4
139 #define CONFIG_FAT_WRITE
140 #define CONFIG_DOS_PARTITION
141
142 /* SD/MMC */
143 #define CONFIG_SUPPORT_EMMC_BOOT
144 #define CONFIG_GENERIC_MMC
145
146 /* memtest works on */
147 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
148 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
149
150 /*
151 * Network Configuration
152 */
153 #define CONFIG_SERVERIP 192.168.11.1
154 #define CONFIG_IPADDR 192.168.11.10
155 #define CONFIG_GATEWAYIP 192.168.11.1
156 #define CONFIG_NETMASK 255.255.255.0
157
158 #define CONFIG_LOADADDR 0x84000000
159 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
160
161 #define CONFIG_CMDLINE_EDITING /* add command line history */
162
163 #define CONFIG_BOOTCOMMAND "run $bootmode"
164
165 #define CONFIG_ROOTPATH "/nfs/root/path"
166 #define CONFIG_NFSBOOTCOMMAND \
167 "setenv bootargs $bootargs root=/dev/nfs rw " \
168 "nfsroot=$serverip:$rootpath " \
169 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
170 "run __nfsboot"
171
172 #ifdef CONFIG_FIT
173 #define CONFIG_BOOTFILE "fitImage"
174 #define LINUXBOOT_ENV_SETTINGS \
175 "fit_addr=0x00100000\0" \
176 "fit_addr_r=0x84100000\0" \
177 "fit_size=0x00f00000\0" \
178 "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
179 "bootm $fit_addr\0" \
180 "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
181 "bootm $fit_addr_r\0" \
182 "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
183 "bootm $fit_addr_r\0" \
184 "__nfsboot=run tftpboot\0"
185 #else
186 #ifdef CONFIG_ARM64
187 #define CONFIG_CMD_BOOTI
188 #define CONFIG_BOOTFILE "Image"
189 #define LINUXBOOT_CMD "booti"
190 #define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0"
191 #define KERNEL_SIZE "kernel_size=0x00c00000\0"
192 #define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0"
193 #else
194 #define CONFIG_BOOTFILE "zImage"
195 #define LINUXBOOT_CMD "bootz"
196 #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
197 #define KERNEL_SIZE "kernel_size=0x00800000\0"
198 #define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0"
199 #endif
200 #define LINUXBOOT_ENV_SETTINGS \
201 "fdt_addr=0x00100000\0" \
202 "fdt_addr_r=0x84100000\0" \
203 "fdt_size=0x00008000\0" \
204 "kernel_addr=0x00200000\0" \
205 KERNEL_ADDR_R \
206 KERNEL_SIZE \
207 RAMDISK_ADDR \
208 "ramdisk_addr_r=0x84a00000\0" \
209 "ramdisk_size=0x00600000\0" \
210 "ramdisk_file=rootfs.cpio.uboot\0" \
211 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
212 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
213 "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
214 "setexpr kernel_size $kernel_size / 4 &&" \
215 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
216 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
217 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
218 "run boot_common\0" \
219 "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
220 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
221 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
222 "run boot_common\0" \
223 "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
224 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
225 "tftpboot $fdt_addr_r $fdt_file &&" \
226 "run boot_common\0" \
227 "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
228 "tftpboot $fdt_addr_r $fdt_file &&" \
229 "tftpboot $fdt_addr_r $fdt_file &&" \
230 "setenv ramdisk_addr_r - &&" \
231 "run boot_common\0"
232 #endif
233
234 #define CONFIG_EXTRA_ENV_SETTINGS \
235 "netdev=eth0\0" \
236 "verify=n\0" \
237 "nor_base=0x42000000\0" \
238 "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
239 "tftpboot $tmp_addr u-boot-spl.bin &&" \
240 "setexpr tmp_addr $nor_base + 0x60000 &&" \
241 "tftpboot $tmp_addr u-boot.bin\0" \
242 "emmcupdate=mmcsetn &&" \
243 "mmc partconf $mmc_first_dev 0 1 1 &&" \
244 "tftpboot u-boot-spl.bin &&" \
245 "mmc write $loadaddr 0 80 &&" \
246 "tftpboot u-boot.bin &&" \
247 "mmc write $loadaddr 80 780\0" \
248 "nandupdate=nand erase 0 0x00100000 &&" \
249 "tftpboot u-boot-spl.bin &&" \
250 "nand write $loadaddr 0 0x00010000 &&" \
251 "tftpboot u-boot.bin &&" \
252 "nand write $loadaddr 0x00010000 0x000f0000\0" \
253 LINUXBOOT_ENV_SETTINGS
254
255 #define CONFIG_SYS_BOOTMAPSZ 0x20000000
256
257 #define CONFIG_SYS_SDRAM_BASE 0x80000000
258 #define CONFIG_NR_DRAM_BANKS 2
259 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
260 #define CONFIG_SYS_MEM_TOP_HIDE 64
261
262 #if defined(CONFIG_ARM64)
263 #define CONFIG_SPL_TEXT_BASE 0x30000000
264 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
265 defined(CONFIG_ARCH_UNIPHIER_LD4) || \
266 defined(CONFIG_ARCH_UNIPHIER_SLD8)
267 #define CONFIG_SPL_TEXT_BASE 0x00040000
268 #else
269 #define CONFIG_SPL_TEXT_BASE 0x00100000
270 #endif
271
272 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
273 #define CONFIG_SPL_STACK (0x30014c00)
274 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
275 #define CONFIG_SPL_STACK (0x3001c000)
276 #else
277 #define CONFIG_SPL_STACK (0x00100000)
278 #endif
279 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
280
281 #define CONFIG_PANIC_HANG
282
283 #define CONFIG_SPL_FRAMEWORK
284 #define CONFIG_SPL_SERIAL_SUPPORT
285 #define CONFIG_SPL_NOR_SUPPORT
286 #ifdef CONFIG_ARM64
287 #define CONFIG_SPL_BOARD_LOAD_IMAGE
288 #else
289 #define CONFIG_SPL_NAND_SUPPORT
290 #define CONFIG_SPL_MMC_SUPPORT
291 #endif
292
293 #define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */
294 #define CONFIG_SPL_LIBGENERIC_SUPPORT
295
296 #define CONFIG_SPL_BOARD_INIT
297
298 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
299
300 /* subtract sizeof(struct image_header) */
301 #define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40)
302 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
303
304 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
305 #define CONFIG_SPL_MAX_FOOTPRINT 0x10000
306 #define CONFIG_SPL_MAX_SIZE 0x10000
307 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
308 #define CONFIG_SPL_BSS_START_ADDR 0x30012000
309 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
310 #define CONFIG_SPL_BSS_START_ADDR 0x30016000
311 #endif
312 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000
313
314 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */