include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Panasonic Corporation
   3  * Copyright (C) 2015-2016 Socionext Inc.
   4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /* U-Boot - Common settings for UniPhier Family */
  10
  11 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  12 #define __CONFIG_UNIPHIER_COMMON_H__
  13
  14 #define CONFIG_ARMV7_PSCI_1_0
  15
  16 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  17
  18 /*-----------------------------------------------------------------------
  19  * MMU and Cache Setting
  20  *----------------------------------------------------------------------*/
  21
  22 /* Comment out the following to enable L1 cache */
  23 /* #define CONFIG_SYS_ICACHE_OFF */
  24 /* #define CONFIG_SYS_DCACHE_OFF */
  25
  26 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  27
  28 #define CONFIG_TIMESTAMP
  29
  30 /* FLASH related */
  31 #define CONFIG_MTD_DEVICE
  32
  33 #define CONFIG_SMC911X_32_BIT
  34 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  35 #define CONFIG_SMC911X_BASE     0
  36
  37 #ifdef CONFIG_MICRO_SUPPORT_CARD
  38 #define CONFIG_SMC911X
  39 #else
  40 #define CONFIG_SYS_NO_FLASH
  41 #endif
  42
  43 #define CONFIG_FLASH_CFI_DRIVER
  44 #define CONFIG_SYS_FLASH_CFI
  45
  46 #define CONFIG_SYS_MAX_FLASH_SECT       256
  47 #define CONFIG_SYS_MONITOR_BASE         0
  48 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  49 #define CONFIG_SYS_FLASH_BASE           0
  50
  51 /*
  52  * flash_toggle does not work for our support card.
  53  * We need to use flash_status_poll.
  54  */
  55 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  56
  57 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  58
  59 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  60
  61 /* serial console configuration */
  62 #define CONFIG_BAUDRATE                 115200
  63
  64 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  65
  66 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  67 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  68 /* Print Buffer Size */
  69 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  70 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  71 /* Boot Argument Buffer Size */
  72 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  73
  74 #define CONFIG_CONS_INDEX               1
  75
  76 /* #define CONFIG_ENV_IS_NOWHERE */
  77 /* #define CONFIG_ENV_IS_IN_NAND */
  78 #define CONFIG_ENV_IS_IN_MMC
  79 #define CONFIG_ENV_OFFSET                       0x80000
  80 #define CONFIG_ENV_SIZE                         0x2000
  81 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
  82
  83 #define CONFIG_SYS_MMC_ENV_DEV          0
  84 #define CONFIG_SYS_MMC_ENV_PART         1
  85
  86 #ifdef CONFIG_ARM64
  87 #define CPU_RELEASE_ADDR                        0x80000000
  88 #define COUNTER_FREQUENCY                       50000000
  89 #define CONFIG_GICV3
  90 #define GICD_BASE                               0x5fe00000
  91 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
  92 #define GICR_BASE                               0x5fe40000
  93 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
  94 #define GICR_BASE                               0x5fe80000
  95 #endif
  96 #else
  97 /* Time clock 1MHz */
  98 #define CONFIG_SYS_TIMER_RATE                   1000000
  99 #endif
 100
 101
 102 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 103 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 104 #define CONFIG_SYS_NAND_ONFI_DETECTION
 105
 106 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 107
 108 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 109 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 110 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 111 #else
 112 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 113 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 114 #endif
 115
 116 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 117
 118 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 119 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 120
 121 /* USB */
 122 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 123 #define CONFIG_FAT_WRITE
 124 #define CONFIG_DOS_PARTITION
 125
 126 /* SD/MMC */
 127 #define CONFIG_SUPPORT_EMMC_BOOT
 128 #define CONFIG_GENERIC_MMC
 129
 130 /* memtest works on */
 131 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 132 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 133
 134 /*
 135  * Network Configuration
 136  */
 137 #define CONFIG_SERVERIP                 192.168.11.1
 138 #define CONFIG_IPADDR                   192.168.11.10
 139 #define CONFIG_GATEWAYIP                192.168.11.1
 140 #define CONFIG_NETMASK                  255.255.255.0
 141
 142 #define CONFIG_LOADADDR                 0x84000000
 143 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 144
 145 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 146
 147 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 148
 149 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 150 #define CONFIG_NFSBOOTCOMMAND                                           \
 151         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 152         "nfsroot=$serverip:$rootpath "                                  \
 153         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 154                 "run __nfsboot"
 155
 156 #ifdef CONFIG_FIT
 157 #define CONFIG_BOOTFILE                 "fitImage"
 158 #define LINUXBOOT_ENV_SETTINGS \
 159         "fit_addr=0x00100000\0" \
 160         "fit_addr_r=0x84100000\0" \
 161         "fit_size=0x00f00000\0" \
 162         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 163                 "bootm $fit_addr\0" \
 164         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 165                 "bootm $fit_addr_r\0" \
 166         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 167                 "bootm $fit_addr_r\0" \
 168         "__nfsboot=run tftpboot\0"
 169 #else
 170 #ifdef CONFIG_ARM64
 171 #define CONFIG_BOOTFILE                 "Image"
 172 #define LINUXBOOT_CMD                   "booti"
 173 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
 174 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
 175 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
 176 #else
 177 #define CONFIG_BOOTFILE                 "zImage"
 178 #define LINUXBOOT_CMD                   "bootz"
 179 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
 180 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
 181 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
 182 #endif
 183 #define LINUXBOOT_ENV_SETTINGS \
 184         "fdt_addr=0x00100000\0" \
 185         "fdt_addr_r=0x84100000\0" \
 186         "fdt_size=0x00008000\0" \
 187         "kernel_addr=0x00200000\0" \
 188         KERNEL_ADDR_R \
 189         KERNEL_SIZE \
 190         RAMDISK_ADDR \
 191         "ramdisk_addr_r=0x84a00000\0" \
 192         "ramdisk_size=0x00600000\0" \
 193         "ramdisk_file=rootfs.cpio.uboot\0" \
 194         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 195                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 196         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 197                 "setexpr kernel_size $kernel_size / 4 &&" \
 198                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
 199                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 200                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 201                 "run boot_common\0" \
 202         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 203                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 204                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 205                 "run boot_common\0" \
 206         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 207                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 208                 "tftpboot $fdt_addr_r $fdt_file &&" \
 209                 "run boot_common\0" \
 210         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 211                 "tftpboot $fdt_addr_r $fdt_file &&" \
 212                 "setenv ramdisk_addr_r - &&" \
 213                 "run boot_common\0"
 214 #endif
 215
 216 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 217         "netdev=eth0\0"                                         \
 218         "verify=n\0"                                            \
 219         "nor_base=0x42000000\0"                                 \
 220         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 221                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
 222                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
 223                 "tftpboot $tmp_addr u-boot.bin\0"               \
 224         "emmcupdate=mmcsetn &&"                                 \
 225                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 226                 "tftpboot u-boot-spl.bin &&"                    \
 227                 "mmc write $loadaddr 0 80 &&"                   \
 228                 "tftpboot u-boot.bin &&"                        \
 229                 "mmc write $loadaddr 80 780\0"                  \
 230         "nandupdate=nand erase 0 0x00100000 &&"                 \
 231                 "tftpboot u-boot-spl.bin &&"                    \
 232                 "nand write $loadaddr 0 0x00010000 &&"          \
 233                 "tftpboot u-boot.bin &&"                        \
 234                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 235         LINUXBOOT_ENV_SETTINGS
 236
 237 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 238
 239 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 240 #define CONFIG_NR_DRAM_BANKS            2
 241 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
 242 #define CONFIG_SYS_MEM_TOP_HIDE         64
 243
 244 #if defined(CONFIG_ARM64)
 245 #define CONFIG_SPL_TEXT_BASE            0x30000000
 246 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
 247         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 248         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 249 #define CONFIG_SPL_TEXT_BASE            0x00040000
 250 #else
 251 #define CONFIG_SPL_TEXT_BASE            0x00100000
 252 #endif
 253
 254 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 255 #define CONFIG_SPL_STACK                (0x30014c00)
 256 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 257 #define CONFIG_SPL_STACK                (0x3001c000)
 258 #else
 259 #define CONFIG_SPL_STACK                (0x00100000)
 260 #endif
 261 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 262
 263 #define CONFIG_PANIC_HANG
 264
 265 #define CONFIG_SPL_FRAMEWORK
 266 #ifdef CONFIG_ARM64
 267 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 268 #endif
 269
 270 #define CONFIG_SPL_BOARD_INIT
 271
 272 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 273
 274 /* subtract sizeof(struct image_header) */
 275 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 276
 277 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 278 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 279 #define CONFIG_SPL_MAX_SIZE                     0x10000
 280 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 281 #define CONFIG_SPL_BSS_START_ADDR               0x30012000
 282 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 283 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
 284 #endif
 285 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 286
 287 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */