include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /* U-Boot - Common settings for UniPhier Family */
   8
   9 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  10 #define __CONFIG_UNIPHIER_COMMON_H__
  11
  12 #define CONFIG_I2C_EEPROM
  13 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  14
  15 #define CONFIG_SMC911X
  16
  17 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  18 #define CONFIG_SMC911X_BASE     0
  19 #define CONFIG_SMC911X_32_BIT
  20
  21 /*-----------------------------------------------------------------------
  22  * MMU and Cache Setting
  23  *----------------------------------------------------------------------*/
  24
  25 /* Comment out the following to enable L1 cache */
  26 /* #define CONFIG_SYS_ICACHE_OFF */
  27 /* #define CONFIG_SYS_DCACHE_OFF */
  28
  29 #define CONFIG_SYS_CACHELINE_SIZE       32
  30
  31 /* Comment out the following to disable L2 cache */
  32 #define CONFIG_UNIPHIER_L2CACHE_ON
  33
  34 #define CONFIG_DISPLAY_CPUINFO
  35 #define CONFIG_DISPLAY_BOARDINFO
  36 #define CONFIG_MISC_INIT_F
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38 #define CONFIG_BOARD_EARLY_INIT_R
  39 #define CONFIG_BOARD_LATE_INIT
  40
  41 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  42
  43 #define CONFIG_TIMESTAMP
  44
  45 /* FLASH related */
  46 #define CONFIG_MTD_DEVICE
  47
  48 /*
  49  * uncomment the following to disable FLASH related code.
  50  */
  51 /* #define CONFIG_SYS_NO_FLASH */
  52
  53 #define CONFIG_FLASH_CFI_DRIVER
  54 #define CONFIG_SYS_FLASH_CFI
  55
  56 #define CONFIG_SYS_MAX_FLASH_SECT       256
  57 #define CONFIG_SYS_MONITOR_BASE         0
  58 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  59 #define CONFIG_SYS_FLASH_BASE           0
  60
  61 /*
  62  * flash_toggle does not work for out supoort card.
  63  * We need to use flash_status_poll.
  64  */
  65 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  66
  67 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  68
  69 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  70
  71 /* serial console configuration */
  72 #define CONFIG_BAUDRATE                 115200
  73
  74
  75 #if !defined(CONFIG_SPL_BUILD)
  76 #define CONFIG_USE_ARCH_MEMSET
  77 #define CONFIG_USE_ARCH_MEMCPY
  78 #endif
  79
  80 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  81
  82 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  83 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  84 /* Print Buffer Size */
  85 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  86 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  87 /* Boot Argument Buffer Size */
  88 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  89
  90 #define CONFIG_CONS_INDEX               1
  91
  92 /* #define CONFIG_ENV_IS_NOWHERE */
  93 /* #define CONFIG_ENV_IS_IN_NAND */
  94 #define CONFIG_ENV_IS_IN_MMC
  95 #define CONFIG_ENV_OFFSET                       0x80000
  96 #define CONFIG_ENV_SIZE                         0x2000
  97 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
  98
  99 #define CONFIG_SYS_MMC_ENV_DEV          0
 100 #define CONFIG_SYS_MMC_ENV_PART         1
 101
 102 /* Time clock 1MHz */
 103 #define CONFIG_SYS_TIMER_RATE                   1000000
 104
 105 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 106 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 107 #define CONFIG_SYS_NAND_ONFI_DETECTION
 108
 109 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 110
 111 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 112 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 113 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 114 #else
 115 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 116 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 117 #endif
 118
 119 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 120
 121 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 122 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 123
 124 /* USB */
 125 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 126 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 127 #define CONFIG_CMD_FAT
 128 #define CONFIG_FAT_WRITE
 129 #define CONFIG_DOS_PARTITION
 130
 131 /* SD/MMC */
 132 #define CONFIG_CMD_MMC
 133 #define CONFIG_SUPPORT_EMMC_BOOT
 134 #define CONFIG_GENERIC_MMC
 135
 136 /* memtest works on */
 137 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 138 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 139
 140 #define CONFIG_BOOTDELAY                        3
 141 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 142
 143 /*
 144  * Network Configuration
 145  */
 146 #define CONFIG_SERVERIP                 192.168.11.1
 147 #define CONFIG_IPADDR                   192.168.11.10
 148 #define CONFIG_GATEWAYIP                192.168.11.1
 149 #define CONFIG_NETMASK                  255.255.255.0
 150
 151 #define CONFIG_LOADADDR                 0x84000000
 152 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 153
 154 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 155
 156 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 157
 158 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 159 #define CONFIG_NFSBOOTCOMMAND                                           \
 160         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 161         "nfsroot=$serverip:$rootpath "                                  \
 162         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 163                 "run __nfsboot"
 164
 165 #ifdef CONFIG_FIT
 166 #define CONFIG_BOOTFILE                 "fitImage"
 167 #define LINUXBOOT_ENV_SETTINGS \
 168         "fit_addr=0x00100000\0" \
 169         "fit_addr_r=0x84100000\0" \
 170         "fit_size=0x00f00000\0" \
 171         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 172                 "bootm $fit_addr\0" \
 173         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 174                 "bootm $fit_addr_r\0" \
 175         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 176                 "bootm $fit_addr_r\0" \
 177         "__nfsboot=run tftpboot\0"
 178 #else
 179 #define CONFIG_CMD_BOOTZ
 180 #define CONFIG_BOOTFILE                 "zImage"
 181 #define LINUXBOOT_ENV_SETTINGS \
 182         "fdt_addr=0x00100000\0" \
 183         "fdt_addr_r=0x84100000\0" \
 184         "fdt_size=0x00008000\0" \
 185         "kernel_addr=0x00200000\0" \
 186         "kernel_addr_r=0x80208000\0" \
 187         "kernel_size=0x00800000\0" \
 188         "ramdisk_addr=0x00a00000\0" \
 189         "ramdisk_addr_r=0x84a00000\0" \
 190         "ramdisk_size=0x00600000\0" \
 191         "ramdisk_file=rootfs.cpio.uboot\0" \
 192         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 193                 "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 194         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 195                 "cp.b $kernel_addr $kernel_addr_r $kernel_size &&" \
 196                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 197                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 198                 "run boot_common\0" \
 199         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 200                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 201                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 202                 "run boot_common\0" \
 203         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 204                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 205                 "tftpboot $fdt_addr_r $fdt_file &&" \
 206                 "run boot_common\0" \
 207         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 208                 "tftpboot $fdt_addr_r $fdt_file &&" \
 209                 "tftpboot $fdt_addr_r $fdt_file &&" \
 210                 "setenv ramdisk_addr_r - &&" \
 211                 "run boot_common\0"
 212 #endif
 213
 214 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 215         "netdev=eth0\0"                                         \
 216         "verify=n\0"                                            \
 217         "nor_base=0x42000000\0"                                 \
 218         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 219                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
 220                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
 221                 "tftpboot $tmp_addr u-boot.bin\0"               \
 222         "emmcupdate=mmcsetn &&"                                 \
 223                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 224                 "mmc erase 0 800 &&"                            \
 225                 "tftpboot u-boot-spl.bin &&"                    \
 226                 "mmc write $loadaddr 0 80 &&"                   \
 227                 "tftpboot u-boot.bin &&"                        \
 228                 "mmc write $loadaddr 80 780\0"                  \
 229         "nandupdate=nand erase 0 0x00100000 &&"                 \
 230                 "tftpboot u-boot-spl.bin &&"                    \
 231                 "nand write $loadaddr 0 0x00010000 &&"          \
 232                 "tftpboot u-boot.bin &&"                        \
 233                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 234         LINUXBOOT_ENV_SETTINGS
 235
 236 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 237
 238 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 239 #define CONFIG_NR_DRAM_BANKS            2
 240
 241 #if defined(CONFIG_ARCH_UNIPHIER_SLD3) || defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 242         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 243 #define CONFIG_SPL_TEXT_BASE            0x00040000
 244 #else
 245 #define CONFIG_SPL_TEXT_BASE            0x00100000
 246 #endif
 247
 248 #define CONFIG_SPL_STACK                (0x00100000)
 249 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 250
 251 #define CONFIG_PANIC_HANG
 252
 253 #define CONFIG_SPL_FRAMEWORK
 254 #define CONFIG_SPL_SERIAL_SUPPORT
 255 #define CONFIG_SPL_NOR_SUPPORT
 256 #define CONFIG_SPL_NAND_SUPPORT
 257 #define CONFIG_SPL_MMC_SUPPORT
 258
 259 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* for mem_malloc_init */
 260 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 261
 262 #define CONFIG_SPL_BOARD_INIT
 263
 264 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 265
 266 /* subtract sizeof(struct image_header) */
 267 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 268 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
 269
 270 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 271 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 272 #define CONFIG_SPL_MAX_SIZE                     0x10000
 273
 274 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */