include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Panasonic Corporation
   3  * Copyright (C) 2015-2016 Socionext Inc.
   4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /* U-Boot - Common settings for UniPhier Family */
  10
  11 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  12 #define __CONFIG_UNIPHIER_COMMON_H__
  13
  14 #define CONFIG_ARMV7_PSCI_1_0
  15
  16 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  17
  18 #define CONFIG_SMC911X
  19
  20 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  21 #define CONFIG_SMC911X_BASE     0
  22 #define CONFIG_SMC911X_32_BIT
  23
  24 /*-----------------------------------------------------------------------
  25  * MMU and Cache Setting
  26  *----------------------------------------------------------------------*/
  27
  28 /* Comment out the following to enable L1 cache */
  29 /* #define CONFIG_SYS_ICACHE_OFF */
  30 /* #define CONFIG_SYS_DCACHE_OFF */
  31
  32 #define CONFIG_DISPLAY_CPUINFO
  33 #define CONFIG_DISPLAY_BOARDINFO
  34 #define CONFIG_BOARD_LATE_INIT
  35
  36 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  37
  38 #define CONFIG_TIMESTAMP
  39
  40 /* FLASH related */
  41 #define CONFIG_MTD_DEVICE
  42
  43 /*
  44  * uncomment the following to disable FLASH related code.
  45  */
  46 /* #define CONFIG_SYS_NO_FLASH */
  47
  48 #define CONFIG_FLASH_CFI_DRIVER
  49 #define CONFIG_SYS_FLASH_CFI
  50
  51 #define CONFIG_SYS_MAX_FLASH_SECT       256
  52 #define CONFIG_SYS_MONITOR_BASE         0
  53 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  54 #define CONFIG_SYS_FLASH_BASE           0
  55
  56 /*
  57  * flash_toggle does not work for out supoort card.
  58  * We need to use flash_status_poll.
  59  */
  60 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  61
  62 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  63
  64 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  65
  66 /* serial console configuration */
  67 #define CONFIG_BAUDRATE                 115200
  68
  69 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
  70 #define CONFIG_USE_ARCH_MEMSET
  71 #define CONFIG_USE_ARCH_MEMCPY
  72 #endif
  73
  74 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  75
  76 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  77 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  78 /* Print Buffer Size */
  79 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  80 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  81 /* Boot Argument Buffer Size */
  82 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  83
  84 #define CONFIG_CONS_INDEX               1
  85
  86 /* #define CONFIG_ENV_IS_NOWHERE */
  87 /* #define CONFIG_ENV_IS_IN_NAND */
  88 #define CONFIG_ENV_IS_IN_MMC
  89 #define CONFIG_ENV_OFFSET                       0x80000
  90 #define CONFIG_ENV_SIZE                         0x2000
  91 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
  92
  93 #define CONFIG_SYS_MMC_ENV_DEV          0
  94 #define CONFIG_SYS_MMC_ENV_PART         1
  95
  96 #ifdef CONFIG_ARM64
  97 #define CPU_RELEASE_ADDR                        0x80000000
  98 #define COUNTER_FREQUENCY                       50000000
  99 #define CONFIG_GICV3
 100 #define GICD_BASE                               0x5fe00000
 101 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 102 #define GICR_BASE                               0x5fe40000
 103 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 104 #define GICR_BASE                               0x5fe80000
 105 #endif
 106 #else
 107 /* Time clock 1MHz */
 108 #define CONFIG_SYS_TIMER_RATE                   1000000
 109 #endif
 110
 111
 112 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 113 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 114 #define CONFIG_SYS_NAND_ONFI_DETECTION
 115
 116 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 117
 118 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 119 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 120 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 121 #else
 122 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 123 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 124 #endif
 125
 126 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 127
 128 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 129 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 130
 131 /* USB */
 132 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 133 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 134 #define CONFIG_FAT_WRITE
 135 #define CONFIG_DOS_PARTITION
 136
 137 /* SD/MMC */
 138 #define CONFIG_SUPPORT_EMMC_BOOT
 139 #define CONFIG_GENERIC_MMC
 140
 141 /* memtest works on */
 142 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 143 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 144
 145 /*
 146  * Network Configuration
 147  */
 148 #define CONFIG_SERVERIP                 192.168.11.1
 149 #define CONFIG_IPADDR                   192.168.11.10
 150 #define CONFIG_GATEWAYIP                192.168.11.1
 151 #define CONFIG_NETMASK                  255.255.255.0
 152
 153 #define CONFIG_LOADADDR                 0x84000000
 154 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 155
 156 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 157
 158 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 159
 160 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 161 #define CONFIG_NFSBOOTCOMMAND                                           \
 162         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 163         "nfsroot=$serverip:$rootpath "                                  \
 164         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 165                 "run __nfsboot"
 166
 167 #ifdef CONFIG_FIT
 168 #define CONFIG_BOOTFILE                 "fitImage"
 169 #define LINUXBOOT_ENV_SETTINGS \
 170         "fit_addr=0x00100000\0" \
 171         "fit_addr_r=0x84100000\0" \
 172         "fit_size=0x00f00000\0" \
 173         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 174                 "bootm $fit_addr\0" \
 175         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 176                 "bootm $fit_addr_r\0" \
 177         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 178                 "bootm $fit_addr_r\0" \
 179         "__nfsboot=run tftpboot\0"
 180 #else
 181 #ifdef CONFIG_ARM64
 182 #define CONFIG_BOOTFILE                 "Image"
 183 #define LINUXBOOT_CMD                   "booti"
 184 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
 185 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
 186 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
 187 #else
 188 #define CONFIG_BOOTFILE                 "zImage"
 189 #define LINUXBOOT_CMD                   "bootz"
 190 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
 191 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
 192 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
 193 #endif
 194 #define LINUXBOOT_ENV_SETTINGS \
 195         "fdt_addr=0x00100000\0" \
 196         "fdt_addr_r=0x84100000\0" \
 197         "fdt_size=0x00008000\0" \
 198         "kernel_addr=0x00200000\0" \
 199         KERNEL_ADDR_R \
 200         KERNEL_SIZE \
 201         RAMDISK_ADDR \
 202         "ramdisk_addr_r=0x84a00000\0" \
 203         "ramdisk_size=0x00600000\0" \
 204         "ramdisk_file=rootfs.cpio.uboot\0" \
 205         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 206                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 207         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 208                 "setexpr kernel_size $kernel_size / 4 &&" \
 209                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
 210                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 211                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 212                 "run boot_common\0" \
 213         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 214                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 215                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 216                 "run boot_common\0" \
 217         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 218                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 219                 "tftpboot $fdt_addr_r $fdt_file &&" \
 220                 "run boot_common\0" \
 221         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 222                 "tftpboot $fdt_addr_r $fdt_file &&" \
 223                 "setenv ramdisk_addr_r - &&" \
 224                 "run boot_common\0"
 225 #endif
 226
 227 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 228         "netdev=eth0\0"                                         \
 229         "verify=n\0"                                            \
 230         "nor_base=0x42000000\0"                                 \
 231         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 232                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
 233                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
 234                 "tftpboot $tmp_addr u-boot.bin\0"               \
 235         "emmcupdate=mmcsetn &&"                                 \
 236                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 237                 "tftpboot u-boot-spl.bin &&"                    \
 238                 "mmc write $loadaddr 0 80 &&"                   \
 239                 "tftpboot u-boot.bin &&"                        \
 240                 "mmc write $loadaddr 80 780\0"                  \
 241         "nandupdate=nand erase 0 0x00100000 &&"                 \
 242                 "tftpboot u-boot-spl.bin &&"                    \
 243                 "nand write $loadaddr 0 0x00010000 &&"          \
 244                 "tftpboot u-boot.bin &&"                        \
 245                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 246         LINUXBOOT_ENV_SETTINGS
 247
 248 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 249
 250 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 251 #define CONFIG_NR_DRAM_BANKS            2
 252 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
 253 #define CONFIG_SYS_MEM_TOP_HIDE         64
 254
 255 #if defined(CONFIG_ARM64)
 256 #define CONFIG_SPL_TEXT_BASE            0x30000000
 257 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
 258         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 259         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 260 #define CONFIG_SPL_TEXT_BASE            0x00040000
 261 #else
 262 #define CONFIG_SPL_TEXT_BASE            0x00100000
 263 #endif
 264
 265 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 266 #define CONFIG_SPL_STACK                (0x30014c00)
 267 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 268 #define CONFIG_SPL_STACK                (0x3001c000)
 269 #else
 270 #define CONFIG_SPL_STACK                (0x00100000)
 271 #endif
 272 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 273
 274 #define CONFIG_PANIC_HANG
 275
 276 #define CONFIG_SPL_FRAMEWORK
 277 #ifdef CONFIG_ARM64
 278 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 279 #endif
 280
 281 #define CONFIG_SPL_BOARD_INIT
 282
 283 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 284
 285 /* subtract sizeof(struct image_header) */
 286 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 287 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
 288
 289 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 290 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 291 #define CONFIG_SPL_MAX_SIZE                     0x10000
 292 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 293 #define CONFIG_SPL_BSS_START_ADDR               0x30012000
 294 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 295 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
 296 #endif
 297 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 298
 299 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */