include/configs/uniphier.h

   1 /*
   2  * Copyright (C) 2012-2015 Panasonic Corporation
   3  * Copyright (C) 2015-2016 Socionext Inc.
   4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /* U-Boot - Common settings for UniPhier Family */
  10
  11 #ifndef __CONFIG_UNIPHIER_COMMON_H__
  12 #define __CONFIG_UNIPHIER_COMMON_H__
  13
  14 #define CONFIG_ARMV7_PSCI
  15 #define CONFIG_ARMV7_PSCI_NR_CPUS   4
  16
  17 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
  18
  19 #define CONFIG_SMC911X
  20
  21 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
  22 #define CONFIG_SMC911X_BASE     0
  23 #define CONFIG_SMC911X_32_BIT
  24
  25 /*-----------------------------------------------------------------------
  26  * MMU and Cache Setting
  27  *----------------------------------------------------------------------*/
  28
  29 /* Comment out the following to enable L1 cache */
  30 /* #define CONFIG_SYS_ICACHE_OFF */
  31 /* #define CONFIG_SYS_DCACHE_OFF */
  32
  33 #ifdef CONFIG_CACHE_UNIPHIER
  34 #define CONFIG_SYS_CACHELINE_SIZE       128
  35 #else
  36 #define CONFIG_SYS_CACHELINE_SIZE       32
  37 #endif
  38
  39 #define CONFIG_DISPLAY_CPUINFO
  40 #define CONFIG_DISPLAY_BOARDINFO
  41 #define CONFIG_MISC_INIT_F
  42 #define CONFIG_BOARD_EARLY_INIT_F
  43 #define CONFIG_BOARD_EARLY_INIT_R
  44 #define CONFIG_BOARD_LATE_INIT
  45
  46 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  47
  48 #define CONFIG_TIMESTAMP
  49
  50 /* FLASH related */
  51 #define CONFIG_MTD_DEVICE
  52
  53 /*
  54  * uncomment the following to disable FLASH related code.
  55  */
  56 /* #define CONFIG_SYS_NO_FLASH */
  57
  58 #define CONFIG_FLASH_CFI_DRIVER
  59 #define CONFIG_SYS_FLASH_CFI
  60
  61 #define CONFIG_SYS_MAX_FLASH_SECT       256
  62 #define CONFIG_SYS_MONITOR_BASE         0
  63 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
  64 #define CONFIG_SYS_FLASH_BASE           0
  65
  66 /*
  67  * flash_toggle does not work for out supoort card.
  68  * We need to use flash_status_poll.
  69  */
  70 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
  71
  72 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  73
  74 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
  75
  76 /* serial console configuration */
  77 #define CONFIG_BAUDRATE                 115200
  78
  79 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
  80 #define CONFIG_USE_ARCH_MEMSET
  81 #define CONFIG_USE_ARCH_MEMCPY
  82 #endif
  83
  84 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  85
  86 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
  87 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  88 /* Print Buffer Size */
  89 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  90 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
  91 /* Boot Argument Buffer Size */
  92 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
  93
  94 #define CONFIG_CONS_INDEX               1
  95
  96 /* #define CONFIG_ENV_IS_NOWHERE */
  97 /* #define CONFIG_ENV_IS_IN_NAND */
  98 #define CONFIG_ENV_IS_IN_MMC
  99 #define CONFIG_ENV_OFFSET                       0x80000
 100 #define CONFIG_ENV_SIZE                         0x2000
 101 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
 102
 103 #define CONFIG_SYS_MMC_ENV_DEV          0
 104 #define CONFIG_SYS_MMC_ENV_PART         1
 105
 106 #ifdef CONFIG_ARM64
 107 #define CPU_RELEASE_ADDR                        0x80000000
 108 #define COUNTER_FREQUENCY                       50000000
 109 #define CONFIG_GICV3
 110 #define GICD_BASE                               0x5fe00000
 111 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 112 #define GICR_BASE                               0x5fe40000
 113 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 114 #define GICR_BASE                               0x5fe80000
 115 #endif
 116 #else
 117 /* Time clock 1MHz */
 118 #define CONFIG_SYS_TIMER_RATE                   1000000
 119 #endif
 120
 121
 122 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
 123 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
 124 #define CONFIG_SYS_NAND_ONFI_DETECTION
 125
 126 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
 127
 128 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
 129 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
 130 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
 131 #else
 132 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
 133 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
 134 #endif
 135
 136 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
 137
 138 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 139 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
 140
 141 /* USB */
 142 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 143 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
 144 #define CONFIG_FAT_WRITE
 145 #define CONFIG_DOS_PARTITION
 146
 147 /* SD/MMC */
 148 #define CONFIG_SUPPORT_EMMC_BOOT
 149 #define CONFIG_GENERIC_MMC
 150
 151 /* memtest works on */
 152 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 153 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
 154
 155 /*
 156  * Network Configuration
 157  */
 158 #define CONFIG_SERVERIP                 192.168.11.1
 159 #define CONFIG_IPADDR                   192.168.11.10
 160 #define CONFIG_GATEWAYIP                192.168.11.1
 161 #define CONFIG_NETMASK                  255.255.255.0
 162
 163 #define CONFIG_LOADADDR                 0x84000000
 164 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 165
 166 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 167
 168 #define CONFIG_BOOTCOMMAND              "run $bootmode"
 169
 170 #define CONFIG_ROOTPATH                 "/nfs/root/path"
 171 #define CONFIG_NFSBOOTCOMMAND                                           \
 172         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
 173         "nfsroot=$serverip:$rootpath "                                  \
 174         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
 175                 "run __nfsboot"
 176
 177 #ifdef CONFIG_FIT
 178 #define CONFIG_BOOTFILE                 "fitImage"
 179 #define LINUXBOOT_ENV_SETTINGS \
 180         "fit_addr=0x00100000\0" \
 181         "fit_addr_r=0x84100000\0" \
 182         "fit_size=0x00f00000\0" \
 183         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
 184                 "bootm $fit_addr\0" \
 185         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
 186                 "bootm $fit_addr_r\0" \
 187         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 188                 "bootm $fit_addr_r\0" \
 189         "__nfsboot=run tftpboot\0"
 190 #else
 191 #ifdef CONFIG_ARM64
 192 #define CONFIG_BOOTFILE                 "Image"
 193 #define LINUXBOOT_CMD                   "booti"
 194 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
 195 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
 196 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
 197 #else
 198 #define CONFIG_BOOTFILE                 "zImage"
 199 #define LINUXBOOT_CMD                   "bootz"
 200 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
 201 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
 202 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
 203 #endif
 204 #define LINUXBOOT_ENV_SETTINGS \
 205         "fdt_addr=0x00100000\0" \
 206         "fdt_addr_r=0x84100000\0" \
 207         "fdt_size=0x00008000\0" \
 208         "kernel_addr=0x00200000\0" \
 209         KERNEL_ADDR_R \
 210         KERNEL_SIZE \
 211         RAMDISK_ADDR \
 212         "ramdisk_addr_r=0x84a00000\0" \
 213         "ramdisk_size=0x00600000\0" \
 214         "ramdisk_file=rootfs.cpio.uboot\0" \
 215         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
 216                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 217         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 218                 "setexpr kernel_size $kernel_size / 4 &&" \
 219                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
 220                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
 221                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
 222                 "run boot_common\0" \
 223         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 224                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 225                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
 226                 "run boot_common\0" \
 227         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 228                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 229                 "tftpboot $fdt_addr_r $fdt_file &&" \
 230                 "run boot_common\0" \
 231         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
 232                 "tftpboot $fdt_addr_r $fdt_file &&" \
 233                 "setenv ramdisk_addr_r - &&" \
 234                 "run boot_common\0"
 235 #endif
 236
 237 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 238         "netdev=eth0\0"                                         \
 239         "verify=n\0"                                            \
 240         "nor_base=0x42000000\0"                                 \
 241         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
 242                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
 243                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
 244                 "tftpboot $tmp_addr u-boot.bin\0"               \
 245         "emmcupdate=mmcsetn &&"                                 \
 246                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
 247                 "tftpboot u-boot-spl.bin &&"                    \
 248                 "mmc write $loadaddr 0 80 &&"                   \
 249                 "tftpboot u-boot.bin &&"                        \
 250                 "mmc write $loadaddr 80 780\0"                  \
 251         "nandupdate=nand erase 0 0x00100000 &&"                 \
 252                 "tftpboot u-boot-spl.bin &&"                    \
 253                 "nand write $loadaddr 0 0x00010000 &&"          \
 254                 "tftpboot u-boot.bin &&"                        \
 255                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
 256         LINUXBOOT_ENV_SETTINGS
 257
 258 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
 259
 260 #define CONFIG_SYS_SDRAM_BASE           0x80000000
 261 #define CONFIG_NR_DRAM_BANKS            2
 262 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
 263 #define CONFIG_SYS_MEM_TOP_HIDE         64
 264
 265 #if defined(CONFIG_ARM64)
 266 #define CONFIG_SPL_TEXT_BASE            0x30000000
 267 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
 268         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
 269         defined(CONFIG_ARCH_UNIPHIER_SLD8)
 270 #define CONFIG_SPL_TEXT_BASE            0x00040000
 271 #else
 272 #define CONFIG_SPL_TEXT_BASE            0x00100000
 273 #endif
 274
 275 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 276 #define CONFIG_SPL_STACK                (0x30014c00)
 277 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 278 #define CONFIG_SPL_STACK                (0x3001c000)
 279 #else
 280 #define CONFIG_SPL_STACK                (0x00100000)
 281 #endif
 282 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
 283
 284 #define CONFIG_PANIC_HANG
 285
 286 #define CONFIG_SPL_FRAMEWORK
 287 #define CONFIG_SPL_SERIAL_SUPPORT
 288 #define CONFIG_SPL_NOR_SUPPORT
 289 #ifdef CONFIG_ARM64
 290 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 291 #else
 292 #define CONFIG_SPL_NAND_SUPPORT
 293 #define CONFIG_SPL_MMC_SUPPORT
 294 #endif
 295
 296 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* for mem_malloc_init */
 297 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 298
 299 #define CONFIG_SPL_BOARD_INIT
 300
 301 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
 302
 303 /* subtract sizeof(struct image_header) */
 304 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
 305 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
 306
 307 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
 308 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
 309 #define CONFIG_SPL_MAX_SIZE                     0x10000
 310 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 311 #define CONFIG_SPL_BSS_START_ADDR               0x30012000
 312 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
 313 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
 314 #endif
 315 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
 316
 317 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */