include/configs/usb_a9263.h

   1 /*
   2  * (C) Copyright 2007-2013
   3  * Stelian Pop <stelian.pop@leadtechdesign.com>
   4  * Lead Tech Design <www.leadtechdesign.com>
   5  * Thomas Petazzoni, Free Electrons, <thomas.petazzoni@free-electrons.com>
   6  * Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
   7  *
   8  * Settings for Calao USB-A9263 board
   9  *
  10  * U-Boot image has to be less than 200704 bytes, otherwise at91bootstrap
  11  * installed on board will not be able to load it properly.
  12  *
  13  * SPDX-License-Identifier:     GPL-2.0+
  14  */
  15
  16 #ifndef __CONFIG_H
  17 #define __CONFIG_H
  18 #include <asm/hardware.h>
  19
  20 /* ARM asynchronous clock */
  21 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* 12 MHz crystal */
  22 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  23
  24 #define CONFIG_MACH_TYPE                MACH_TYPE_USB_A9263
  25
  26 #define CONFIG_ARCH_CPU_INIT
  27
  28 #define CONFIG_CMDLINE_TAG      /* enable passing of ATAGs      */
  29 #define CONFIG_SETUP_MEMORY_TAGS
  30 #define CONFIG_INITRD_TAG
  31
  32 #define CONFIG_SKIP_LOWLEVEL_INIT
  33
  34 #define CONFIG_DISPLAY_CPUINFO
  35
  36 #define CONFIG_OF_LIBFDT
  37 #define CONFIG_SYS_GENERIC_BOARD
  38 #define CONFIG_SYS_TEXT_BASE            0x23f00000
  39
  40 /*
  41  * Hardware drivers
  42  */
  43 #define CONFIG_AT91_GPIO
  44
  45 /* serial console */
  46 #define CONFIG_ATMEL_USART
  47 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  48 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  49 #define CONFIG_BAUDRATE                 115200
  50
  51 #define CONFIG_BOOTDELAY 3
  52
  53 /*
  54  * BOOTP options
  55  */
  56 #define CONFIG_BOOTP_BOOTFILESIZE
  57 #define CONFIG_BOOTP_BOOTPATH
  58 #define CONFIG_BOOTP_GATEWAY
  59 #define CONFIG_BOOTP_HOSTNAME
  60
  61 /*
  62  * Command line configuration.
  63  */
  64 #define CONFIG_CMD_PING
  65 #define CONFIG_CMD_DHCP
  66 #define CONFIG_CMD_NAND
  67
  68 /* SDRAM */
  69 #define CONFIG_NR_DRAM_BANKS            1
  70 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS1
  71 #define CONFIG_SYS_SDRAM_SIZE           0x04000000
  72
  73 #define CONFIG_SYS_INIT_SP_ADDR \
  74         (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
  75
  76 /* DataFlash */
  77 #define CONFIG_ATMEL_DATAFLASH_SPI
  78 #define CONFIG_HAS_DATAFLASH
  79 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          1
  80 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000
  81 #define AT91_SPI_CLK                            8000000
  82 #define DATAFLASH_TCSS                          (0x1a << 16)
  83 #define DATAFLASH_TCHS                          (0x1 << 24)
  84
  85 /* no NOR flash */
  86 #define CONFIG_SYS_NO_FLASH
  87
  88 /* NAND flash */
  89 #ifdef CONFIG_CMD_NAND
  90 #define CONFIG_NAND_ATMEL
  91 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  92 #define CONFIG_SYS_NAND_BASE                    ATMEL_BASE_CS3
  93 /* our ALE is AD21 */
  94 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 21)
  95 /* our CLE is AD22 */
  96 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 22)
  97 #define CONFIG_SYS_NAND_ENABLE_PIN              GPIO_PIN_PD(15)
  98 #define CONFIG_SYS_NAND_READY_PIN               GPIO_PIN_PA(22)
  99 #endif
 100
 101 #define MTDPARTS_DEFAULT \
 102         "mtdparts=atmel_nand:16m(kernel)ro,120m(root1),-(root2)"
 103
 104 /* Ethernet */
 105 #define CONFIG_MACB
 106 #define CONFIG_RMII
 107 #define CONFIG_NET_RETRY_COUNT                  20
 108 #define CONFIG_AT91_WANTS_COMMON_PHY
 109
 110 /* USB */
 111 #ifdef CONFIG_CMD_USB
 112 #define CONFIG_USB_ATMEL
 113 #define CONFIG_USB_OHCI_NEW
 114 #define CONFIG_DOS_PARTITION
 115 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 116 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00a00000
 117 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9263"
 118 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 119 #define CONFIG_USB_STORAGE
 120 #define CONFIG_CMD_FAT
 121 #endif
 122
 123 #define CONFIG_SYS_LOAD_ADDR                    0x22000000
 124
 125 #define CONFIG_SYS_MEMTEST_START                CONFIG_SYS_SDRAM_BASE
 126 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
 127
 128 /* bootstrap + u-boot + env in dataflash on CS0 */
 129 #define CONFIG_ENV_IS_IN_DATAFLASH
 130 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x4000)
 131 #define CONFIG_ENV_OFFSET       0x2000
 132 #define CONFIG_ENV_ADDR         (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
 133                                  CONFIG_ENV_OFFSET)
 134 #define CONFIG_ENV_SIZE         0x2000
 135 #define CONFIG_BOOTCOMMAND      "nboot 21000000 0"
 136 #define CONFIG_BOOTARGS         "console=ttyS0,115200 " \
 137         "root=/dev/mtdblock1 " \
 138         "mtdparts=" MTDPARTS_DEFAULT " " \
 139         "rw rootfstype=jffs2"
 140 #define CONFIG_EXTRA_ENV_SETTINGS \
 141         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 142
 143 #define CONFIG_SYS_PROMPT               "U-Boot> "
 144 #define CONFIG_SYS_CBSIZE               256
 145 #define CONFIG_SYS_MAXARGS              16
 146 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 147                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 148 #define CONFIG_CMDLINE_EDITING
 149 #define CONFIG_AUTO_COMPLETE
 150 #define CONFIG_SYS_HUSH_PARSER
 151 #define CONFIG_SYS_LONGHELP
 152
 153 /*
 154  * Size of malloc() pool
 155  */
 156 #define CONFIG_SYS_MALLOC_LEN   ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 157
 158 #endif