include/configs/usbarmory.h

   1 /*
   2  * USB armory MkI board configuration settings
   3  * http://inversepath.com/usbarmory
   4  *
   5  * Copyright (C) 2015, Inverse Path
   6  * Andrej Rosano <andrej@inversepath.com>
   7  *
   8  * SPDX-License-Identifier:|____GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_SYS_FSL_CLK
  15 #define CONFIG_MXC_GPIO
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 #include <config_distro_defaults.h>
  20
  21 /* U-Boot environment */
  22 #define CONFIG_ENV_OFFSET       (6 * 64 * 1024)
  23 #define CONFIG_ENV_SIZE         (8 * 1024)
  24 #define CONFIG_SYS_MMC_ENV_DEV  0
  25
  26 /* U-Boot general configurations */
  27 #define CONFIG_SYS_CBSIZE       512
  28
  29 /* UART */
  30 #define CONFIG_MXC_UART
  31 #define CONFIG_MXC_UART_BASE    UART1_BASE
  32 #define CONFIG_CONS_INDEX       1
  33
  34 /* SD/MMC */
  35 #define CONFIG_FSL_ESDHC
  36 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  37 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  38
  39 /* USB */
  40 #define CONFIG_USB_EHCI_MX5
  41 #define CONFIG_MXC_USB_PORT     1
  42 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  43 #define CONFIG_MXC_USB_FLAGS    0
  44
  45 /* I2C */
  46 #define CONFIG_SYS_I2C
  47 #define CONFIG_SYS_I2C_MXC
  48 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  49 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  50
  51 /* Fuse */
  52 #define CONFIG_FSL_IIM
  53
  54 /* U-Boot memory offsets */
  55 #define CONFIG_LOADADDR         0x72000000
  56 #define CONFIG_SYS_TEXT_BASE    0x77800000
  57 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  58
  59 /* Linux boot */
  60 #define CONFIG_HOSTNAME         usbarmory
  61 #define CONFIG_BOOTCOMMAND                                              \
  62         "run distro_bootcmd; "                                          \
  63         "setenv bootargs console=${console} ${bootargs_default}; "      \
  64         "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "              \
  65         "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "             \
  66         "bootz ${kernel_addr_r} - ${fdt_addr_r}"
  67
  68 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
  69
  70 #include <config_distro_bootcmd.h>
  71
  72 #define MEM_LAYOUT_ENV_SETTINGS                 \
  73         "kernel_addr_r=0x70800000\0"            \
  74         "fdt_addr_r=0x71000000\0"               \
  75         "scriptaddr=0x70800000\0"               \
  76         "pxefile_addr_r=0x70800000\0"           \
  77         "ramdisk_addr_r=0x73000000\0"
  78
  79 #define CONFIG_EXTRA_ENV_SETTINGS                               \
  80         MEM_LAYOUT_ENV_SETTINGS                                 \
  81         "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0"    \
  82         "fdtfile=imx53-usbarmory.dtb\0"                         \
  83         "console=ttymxc0,115200\0"                              \
  84         BOOTENV
  85
  86 #ifndef CONFIG_CMDLINE
  87 #define USBARMORY_FIT_PATH      "/boot/usbarmory.itb"
  88 #define USBARMORY_FIT_ADDR      "0x70800000"
  89 #endif
  90
  91 /* Physical Memory Map */
  92 #define CONFIG_NR_DRAM_BANKS            1
  93 #define PHYS_SDRAM                      CSD0_BASE_ADDR
  94 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  95
  96 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  97 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  98 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  99
 100 #define CONFIG_SYS_INIT_SP_OFFSET \
 101         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 102 #define CONFIG_SYS_INIT_SP_ADDR \
 103         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 104
 105 #define CONFIG_SYS_MEMTEST_START        0x70000000
 106 #define CONFIG_SYS_MEMTEST_END          0x90000000
 107
 108 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 109
 110 #endif                          /* __CONFIG_H */