]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/ve8313.h
mpc83xx: Cleanup usage of BAT constants
[people/ms/u-boot.git] / include / configs / ve8313.h
1 /*
2 * Copyright (C) Freescale Semiconductor, Inc. 2006.
3 *
4 * (C) Copyright 2010
5 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25 /*
26 * ve8313 board configuration file
27 */
28
29 #ifndef __CONFIG_H
30 #define __CONFIG_H
31
32 /*
33 * High Level Configuration Options
34 */
35 #define CONFIG_E300 1
36 #define CONFIG_MPC83xx 1
37 #define CONFIG_MPC831x 1
38 #define CONFIG_MPC8313 1
39 #define CONFIG_VE8313 1
40
41 #ifndef CONFIG_SYS_TEXT_BASE
42 #define CONFIG_SYS_TEXT_BASE 0xfe000000
43 #endif
44
45 #define CONFIG_PCI 1
46 #define CONFIG_FSL_ELBC 1
47
48 #define CONFIG_BOARD_EARLY_INIT_F 1
49
50 /*
51 * On-board devices
52 *
53 */
54 #define CONFIG_83XX_CLKIN 32000000 /* in Hz */
55
56 #define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
57
58 #define CONFIG_SYS_IMMR 0xE0000000
59
60 #define CONFIG_SYS_MEMTEST_START 0x00001000
61 #define CONFIG_SYS_MEMTEST_END 0x07000000
62
63 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth */
64 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count */
65
66 /*
67 * Device configurations
68 */
69
70 /*
71 * DDR Setup
72 */
73 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/
74 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
75 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
76
77 /*
78 * Manually set up DDR parameters, as this board does not
79 * have the SPD connected to I2C.
80 */
81 #define CONFIG_SYS_DDR_SIZE 128 /* MB */
82 #define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN \
83 | CSCONFIG_AP \
84 | 0x00040000 /* TODO */ \
85 | CSCONFIG_ROW_BIT_13 \
86 | CSCONFIG_COL_BIT_10)
87 /* 0x80840102 */
88
89 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
90 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
91 | (0 << TIMING_CFG0_WRT_SHIFT) \
92 | (3 << TIMING_CFG0_RRT_SHIFT) \
93 | (2 << TIMING_CFG0_WWT_SHIFT) \
94 | (7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
95 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
96 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
97 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
98 /* 0x0e720802 */
99 #define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
100 | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \
101 | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
102 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
103 | (6 << TIMING_CFG1_REFREC_SHIFT) \
104 | (2 << TIMING_CFG1_WRREC_SHIFT) \
105 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
106 | (2 << TIMING_CFG1_WRTORD_SHIFT))
107 /* 0x26256222 */
108 #define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
109 | (5 << TIMING_CFG2_CPO_SHIFT) \
110 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
111 | (1 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
112 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
113 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
114 | (7 << TIMING_CFG2_FOUR_ACT_SHIFT))
115 /* 0x029028c7 */
116 #define CONFIG_SYS_DDR_INTERVAL ((0x320 << SDRAM_INTERVAL_REFINT_SHIFT) \
117 | (0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
118 /* 0x03202000 */
119 #define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
120 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
121 | SDRAM_CFG_32_BE)
122 /* 0x43080000 */
123 #define CONFIG_SYS_SDRAM_CFG2 0x00401000
124 #define CONFIG_SYS_DDR_MODE ((0x4440 << SDRAM_MODE_ESD_SHIFT) \
125 | (0x0232 << SDRAM_MODE_SD_SHIFT))
126 /* 0x44400232 */
127 #define CONFIG_SYS_DDR_MODE_2 0x8000C000
128
129 #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
130 /*0x02000000*/
131 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
132 | DDRCDR_PZ_NOMZ \
133 | DDRCDR_NZ_NOMZ \
134 | DDRCDR_M_ODR)
135 /* 0x73000002 */
136
137 /*
138 * FLASH on the Local Bus
139 */
140 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
141 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
142 #define CONFIG_SYS_FLASH_BASE 0xFE000000
143 #define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */
144 #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */
145 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
146
147 #define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \
148 | (2 << BR_PS_SHIFT) /* 16 bit */ \
149 | BR_V) /* valid */
150 #define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
151 | OR_GPCM_CSNT \
152 | OR_GPCM_ACS_DIV4 \
153 | OR_GPCM_SCY_5 \
154 | OR_GPCM_TRLX \
155 | OR_GPCM_EAD)
156 /* 0xfe000c55 */
157
158 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
159 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */
160
161 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
162 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */
163
164 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
165 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
166
167 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
168
169 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
170 #define CONFIG_SYS_RAMBOOT
171 #endif
172
173 #define CONFIG_SYS_INIT_RAM_LOCK 1
174 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
175 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
176
177 #define CONFIG_SYS_GBL_DATA_OFFSET \
178 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
179 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
180
181 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
182 #define CONFIG_SYS_MONITOR_LEN (384 * 1024)
183 #define CONFIG_SYS_MALLOC_LEN (512 * 1024)
184
185 /*
186 * Local Bus LCRR and LBCR regs
187 */
188 #define CONFIG_SYS_LCRR_EADC LCRR_EADC_3
189 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
190
191 #define CONFIG_SYS_LBC_LBCR 0x00040000
192
193 #define CONFIG_SYS_LBC_MRTPR 0x20000000
194
195 /*
196 * NAND settings
197 */
198 #define CONFIG_SYS_NAND_BASE 0x61000000
199 #define CONFIG_SYS_MAX_NAND_DEVICE 1
200 #define CONFIG_MTD_NAND_VERIFY_WRITE
201 #define CONFIG_CMD_NAND 1
202 #define CONFIG_NAND_FSL_ELBC 1
203 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
204
205 #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \
206 | BR_PS_8 \
207 | BR_DECC_CHK_GEN \
208 | BR_MS_FCM \
209 | BR_V) /* valid */
210 /* 0x61000c21 */
211 #define CONFIG_SYS_NAND_OR_PRELIM (0xffff8000 \
212 | OR_FCM_BCTLD \
213 | OR_FCM_CHT \
214 | OR_FCM_SCY_2 \
215 | OR_FCM_RST \
216 | OR_FCM_TRLX)
217 /* 0xffff90ac */
218
219 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
220 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
221 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
222 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
223
224 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
225 #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
226
227 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
228 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
229
230 /* CS2 NvRAM */
231 #define CONFIG_SYS_BR2_PRELIM (0x60000000 \
232 | BR_PS_8 \
233 | BR_V)
234 /* 0x60000801 */
235 #define CONFIG_SYS_OR2_PRELIM (0xfffe0000 \
236 | OR_GPCM_CSNT \
237 | OR_GPCM_XACS \
238 | OR_GPCM_SCY_3 \
239 | OR_GPCM_TRLX \
240 | OR_GPCM_EHTR \
241 | OR_GPCM_EAD)
242 /* 0xfffe0937 */
243 /* local bus read write buffer mapping SRAM@0x64000000 */
244 #define CONFIG_SYS_BR3_PRELIM (0x62000000 \
245 | BR_PS_16 \
246 | BR_V)
247 /* 0x62001001 */
248
249 #define CONFIG_SYS_OR3_PRELIM (0xfe000000 \
250 | OR_GPCM_CSNT \
251 | OR_GPCM_XACS \
252 | OR_GPCM_SCY_15 \
253 | OR_GPCM_TRLX \
254 | OR_GPCM_EHTR \
255 | OR_GPCM_EAD)
256 /* 0xfe0009f7 */
257
258 /* pass open firmware flat tree */
259 #define CONFIG_OF_LIBFDT 1
260 #define CONFIG_OF_BOARD_SETUP 1
261 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
262
263 /*
264 * Serial Port
265 */
266 #define CONFIG_CONS_INDEX 1
267 #define CONFIG_SYS_NS16550
268 #define CONFIG_SYS_NS16550_SERIAL
269 #define CONFIG_SYS_NS16550_REG_SIZE 1
270 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
271
272 #define CONFIG_SYS_BAUDRATE_TABLE \
273 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
274
275 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
276 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
277
278 /* Use the HUSH parser */
279 #define CONFIG_SYS_HUSH_PARSER
280 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
281
282 #if defined(CONFIG_PCI)
283 /*
284 * General PCI
285 * Addresses are mapped 1-1.
286 */
287 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
288 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
289 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
290 #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
291 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
292 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
293 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
294 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
295 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
296
297 #define CONFIG_PCI_PNP /* do pci plug-and-play */
298 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
299 #endif
300
301 /*
302 * TSEC
303 */
304 #define CONFIG_TSEC_ENET /* TSEC ethernet support */
305
306
307 #define CONFIG_TSEC1
308 #ifdef CONFIG_TSEC1
309 #define CONFIG_HAS_ETH0
310 #define CONFIG_TSEC1_NAME "TSEC1"
311 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
312 #define TSEC1_PHY_ADDR 0x01
313 #define TSEC1_FLAGS 0
314 #define TSEC1_PHYIDX 0
315 #endif
316
317 /* Options are: TSEC[0-1] */
318 #define CONFIG_ETHPRIME "TSEC1"
319
320 /*
321 * Environment
322 */
323 #define CONFIG_ENV_IS_IN_FLASH 1
324 #define CONFIG_ENV_ADDR \
325 (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
326 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
327 #define CONFIG_ENV_SIZE 0x4000
328 /* Address and size of Redundant Environment Sector */
329 #define CONFIG_ENV_OFFSET_REDUND \
330 (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
331 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
332
333 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
334 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
335
336 /*
337 * BOOTP options
338 */
339 #define CONFIG_BOOTP_BOOTFILESIZE
340 #define CONFIG_BOOTP_BOOTPATH
341 #define CONFIG_BOOTP_GATEWAY
342 #define CONFIG_BOOTP_HOSTNAME
343
344 /*
345 * Command line configuration.
346 */
347 #include <config_cmd_default.h>
348
349 #define CONFIG_CMD_DHCP
350 #define CONFIG_CMD_MII
351 #define CONFIG_CMD_PING
352 #define CONFIG_CMD_PCI
353
354 #define CONFIG_CMDLINE_EDITING 1
355 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
356
357 /*
358 * Miscellaneous configurable options
359 */
360 #define CONFIG_SYS_LONGHELP /* undef to save memory */
361 #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
362 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
363 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
364
365 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
366 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
367 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
368 #define CONFIG_SYS_HZ 1000 /* 1ms ticks */
369
370 /*
371 * For booting Linux, the board info and command line data
372 * have to be in the first 256 MB of memory, since this is
373 * the maximum mapped by the Linux kernel during initialization.
374 */
375 /* Initial Memory map for Linux*/
376 #define CONFIG_SYS_BOOTMAPSZ (256 << 20)
377
378 /* 0x64050000 */
379 #define CONFIG_SYS_HRCW_LOW (\
380 0x20000000 /* reserved, must be set */ |\
381 HRCWL_DDRCM |\
382 HRCWL_CSB_TO_CLKIN_4X1 | \
383 HRCWL_CORE_TO_CSB_2_5X1)
384
385 /* 0xa0600004 */
386 #define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST | \
387 HRCWH_PCI_ARBITER_ENABLE | \
388 HRCWH_CORE_ENABLE | \
389 HRCWH_FROM_0X00000100 | \
390 HRCWH_BOOTSEQ_DISABLE |\
391 HRCWH_SW_WATCHDOG_DISABLE |\
392 HRCWH_ROM_LOC_LOCAL_16BIT | \
393 HRCWH_TSEC1M_IN_MII | \
394 HRCWH_BIG_ENDIAN | \
395 HRCWH_LALE_EARLY)
396
397 /* System IO Config */
398 #define CONFIG_SYS_SICRH (0x01000000 | \
399 SICRH_ETSEC2_B | \
400 SICRH_ETSEC2_C | \
401 SICRH_ETSEC2_D | \
402 SICRH_ETSEC2_E | \
403 SICRH_ETSEC2_F | \
404 SICRH_ETSEC2_G | \
405 SICRH_TSOBI1 | \
406 SICRH_TSOBI2)
407 /* 0x010fff03 */
408 #define CONFIG_SYS_SICRL (SICRL_LBC | \
409 SICRL_SPI_A | \
410 SICRL_SPI_B | \
411 SICRL_SPI_C | \
412 SICRL_SPI_D | \
413 SICRL_ETSEC2_A)
414 /* 0x33fc0003) */
415
416 #define CONFIG_SYS_HID0_INIT 0x000000000
417 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
418 HID0_ENABLE_INSTRUCTION_CACHE)
419
420 #define CONFIG_SYS_HID2 HID2_HBE
421
422 #define CONFIG_HIGH_BATS 1 /* High BATs supported */
423
424 /* DDR @ 0x00000000 */
425 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
426 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \
427 | BATU_BL_256M \
428 | BATU_VS \
429 | BATU_VP)
430
431 #if defined(CONFIG_PCI)
432 /* PCI @ 0x80000000 */
433 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
434 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \
435 | BATU_BL_256M \
436 | BATU_VS \
437 | BATU_VP)
438 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \
439 | BATL_PP_RW \
440 | BATL_CACHEINHIBIT \
441 | BATL_GUARDEDSTORAGE)
442 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \
443 | BATU_BL_256M \
444 | BATU_VS \
445 | BATU_VP)
446 #else
447 #define CONFIG_SYS_IBAT1L (0)
448 #define CONFIG_SYS_IBAT1U (0)
449 #define CONFIG_SYS_IBAT2L (0)
450 #define CONFIG_SYS_IBAT2U (0)
451 #endif
452
453 /* PCI2 not supported on 8313 */
454 #define CONFIG_SYS_IBAT3L (0)
455 #define CONFIG_SYS_IBAT3U (0)
456 #define CONFIG_SYS_IBAT4L (0)
457 #define CONFIG_SYS_IBAT4U (0)
458
459 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
460 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \
461 | BATL_PP_RW \
462 | BATL_CACHEINHIBIT \
463 | BATL_GUARDEDSTORAGE)
464 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \
465 | BATU_BL_256M \
466 | BATU_VS \
467 | BATU_VP)
468
469 /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
470 #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
471 #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
472
473 /* FPGA, SRAM, NAND @ 0x60000000 */
474 #define CONFIG_SYS_IBAT7L (0x60000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
475 #define CONFIG_SYS_IBAT7U (0x60000000 | BATU_BL_256M | BATU_VS | BATU_VP)
476
477 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
478 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
479 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
480 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
481 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
482 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
483 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
484 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
485 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
486 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
487 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
488 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
489 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
490 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
491 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
492 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
493
494 #define CONFIG_NETDEV eth0
495
496 #define CONFIG_HOSTNAME ve8313
497 #define CONFIG_UBOOTPATH ve8313/u-boot.bin
498
499 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
500 #define CONFIG_BAUDRATE 115200
501
502 #define XMK_STR(x) #x
503 #define MK_STR(x) XMK_STR(x)
504
505 #define CONFIG_EXTRA_ENV_SETTINGS \
506 "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
507 "ethprime=" MK_STR(CONFIG_TSEC1_NAME) "\0" \
508 "u-boot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
509 "u-boot_addr_r=100000\0" \
510 "load=tftp ${u-boot_addr_r} ${u-boot}\0" \
511 "update=protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
512 "erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
513 "cp.b ${u-boot_addr_r} " MK_STR(CONFIG_SYS_FLASH_BASE) \
514 " ${filesize};" \
515 "protect on " MK_STR(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \
516
517 #undef MK_STR
518 #undef XMK_STR
519
520 #endif /* __CONFIG_H */