include/configs/vf610twr.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale Vybrid vf610twr board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <config_cmd_default.h>
  14
  15 #define CONFIG_VF610
  16
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #define CONFIG_MACH_TYPE                4146
  21
  22 #define CONFIG_SKIP_LOWLEVEL_INIT
  23
  24 /* Enable passing of ATAGs */
  25 #define CONFIG_CMDLINE_TAG
  26
  27 #define CONFIG_CMD_FUSE
  28 #ifdef CONFIG_CMD_FUSE
  29 #define CONFIG_MXC_OCOTP
  30 #endif
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  34
  35 #define CONFIG_BOARD_EARLY_INIT_F
  36
  37 #define CONFIG_FSL_LPUART
  38 #define LPUART_BASE                     UART1_BASE
  39
  40 /* Allow to overwrite serial and ethaddr */
  41 #define CONFIG_ENV_OVERWRITE
  42 #define CONFIG_SYS_UART_PORT            (1)
  43 #define CONFIG_BAUDRATE                 115200
  44
  45 #undef CONFIG_CMD_IMLS
  46
  47 #define CONFIG_MMC
  48 #define CONFIG_FSL_ESDHC
  49 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  50 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  51
  52 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  53
  54 #define CONFIG_CMD_MMC
  55 #define CONFIG_GENERIC_MMC
  56 #define CONFIG_CMD_FAT
  57 #define CONFIG_DOS_PARTITION
  58
  59 #define CONFIG_CMD_PING
  60 #define CONFIG_CMD_DHCP
  61 #define CONFIG_CMD_MII
  62 #define CONFIG_CMD_NET
  63 #define CONFIG_FEC_MXC
  64 #define CONFIG_MII
  65 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  66 #define CONFIG_FEC_XCV_TYPE             RMII
  67 #define CONFIG_FEC_MXC_PHYADDR          0
  68 #define CONFIG_PHYLIB
  69 #define CONFIG_PHY_MICREL
  70
  71 /* I2C Configs */
  72 #define CONFIG_CMD_I2C
  73 #define CONFIG_SYS_I2C
  74 #define CONFIG_SYS_I2C_MXC
  75 #define CONFIG_SYS_SPD_BUS_NUM          0
  76
  77 #define CONFIG_BOOTDELAY                3
  78
  79 #define CONFIG_LOADADDR                 0x82000000
  80 #define CONFIG_SYS_TEXT_BASE            0x3f008000
  81
  82 #define CONFIG_EXTRA_ENV_SETTINGS \
  83         "script=boot.scr\0" \
  84         "uimage=uImage\0" \
  85         "console=ttyLP1\0" \
  86         "fdt_high=0xffffffff\0" \
  87         "initrd_high=0xffffffff\0" \
  88         "fdt_file=vf610-twr.dtb\0" \
  89         "fdt_addr=0x81000000\0" \
  90         "boot_fdt=try\0" \
  91         "ip_dyn=yes\0" \
  92         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  93         "mmcpart=1\0" \
  94         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  95         "update_sd_firmware_filename=u-boot.imx\0" \
  96         "update_sd_firmware=" \
  97                 "if test ${ip_dyn} = yes; then " \
  98                         "setenv get_cmd dhcp; " \
  99                 "else " \
 100                         "setenv get_cmd tftp; " \
 101                 "fi; " \
 102                 "if mmc dev ${mmcdev}; then "   \
 103                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 104                                 "setexpr fw_sz ${filesize} / 0x200; " \
 105                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 106                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 107                         "fi; "  \
 108                 "fi\0" \
 109         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 110                 "root=${mmcroot}\0" \
 111         "loadbootscript=" \
 112                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 113         "bootscript=echo Running bootscript from mmc ...; " \
 114                 "source\0" \
 115         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 116         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 117         "mmcboot=echo Booting from mmc ...; " \
 118                 "run mmcargs; " \
 119                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 120                         "if run loadfdt; then " \
 121                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 122                         "else " \
 123                                 "if test ${boot_fdt} = try; then " \
 124                                         "bootm; " \
 125                                 "else " \
 126                                         "echo WARN: Cannot load the DT; " \
 127                                 "fi; " \
 128                         "fi; " \
 129                 "else " \
 130                         "bootm; " \
 131                 "fi;\0" \
 132         "netargs=setenv bootargs console=${console},${baudrate} " \
 133                 "root=/dev/nfs " \
 134         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 135                 "netboot=echo Booting from net ...; " \
 136                 "run netargs; " \
 137                 "if test ${ip_dyn} = yes; then " \
 138                         "setenv get_cmd dhcp; " \
 139                 "else " \
 140                         "setenv get_cmd tftp; " \
 141                 "fi; " \
 142                 "${get_cmd} ${uimage}; " \
 143                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 144                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 145                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 146                         "else " \
 147                                 "if test ${boot_fdt} = try; then " \
 148                                         "bootm; " \
 149                                 "else " \
 150                                         "echo WARN: Cannot load the DT; " \
 151                                 "fi; " \
 152                         "fi; " \
 153                 "else " \
 154                         "bootm; " \
 155                 "fi;\0"
 156
 157 #define CONFIG_BOOTCOMMAND \
 158            "mmc dev ${mmcdev}; if mmc rescan; then " \
 159                    "if run loadbootscript; then " \
 160                            "run bootscript; " \
 161                    "else " \
 162                            "if run loaduimage; then " \
 163                                    "run mmcboot; " \
 164                            "else run netboot; " \
 165                            "fi; " \
 166                    "fi; " \
 167            "else run netboot; fi"
 168
 169 /* Miscellaneous configurable options */
 170 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 171 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 172 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 173 #undef CONFIG_AUTO_COMPLETE
 174 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 175 #define CONFIG_SYS_PBSIZE               \
 176                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 177 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 178 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 179
 180 #define CONFIG_CMD_MEMTEST
 181 #define CONFIG_SYS_MEMTEST_START        0x80010000
 182 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 183
 184 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 185
 186 /*
 187  * Stack sizes
 188  * The stack sizes are set up in start.S using the settings below
 189  */
 190 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 191
 192 /* Physical memory map */
 193 #define CONFIG_NR_DRAM_BANKS            1
 194 #define PHYS_SDRAM                      (0x80000000)
 195 #define PHYS_SDRAM_SIZE                 (128 * 1024 * 1024)
 196
 197 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 198 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 199 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 200
 201 #define CONFIG_SYS_INIT_SP_OFFSET \
 202         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 203 #define CONFIG_SYS_INIT_SP_ADDR \
 204         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 205
 206 /* FLASH and environment organization */
 207 #define CONFIG_SYS_NO_FLASH
 208
 209 #define CONFIG_ENV_SIZE                 (8 * 1024)
 210 #define CONFIG_ENV_IS_IN_MMC
 211
 212 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 213 #define CONFIG_SYS_MMC_ENV_DEV          0
 214
 215 #define CONFIG_OF_LIBFDT
 216 #define CONFIG_CMD_BOOTZ
 217
 218 #endif