include/configs/vf610twr.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale Vybrid vf610twr board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <config_cmd_default.h>
  14
  15 #define CONFIG_VF610
  16
  17 #define CONFIG_SYS_GENERIC_BOARD
  18 #define CONFIG_DISPLAY_CPUINFO
  19 #define CONFIG_DISPLAY_BOARDINFO
  20
  21 #define CONFIG_MACH_TYPE                4146
  22
  23 #define CONFIG_SKIP_LOWLEVEL_INIT
  24
  25 /* Enable passing of ATAGs */
  26 #define CONFIG_CMDLINE_TAG
  27
  28 #define CONFIG_CMD_FUSE
  29 #ifdef CONFIG_CMD_FUSE
  30 #define CONFIG_MXC_OCOTP
  31 #endif
  32
  33 /* Size of malloc() pool */
  34 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  35
  36 #define CONFIG_BOARD_EARLY_INIT_F
  37
  38 #define CONFIG_FSL_LPUART
  39 #define LPUART_BASE                     UART1_BASE
  40
  41 /* Allow to overwrite serial and ethaddr */
  42 #define CONFIG_ENV_OVERWRITE
  43 #define CONFIG_SYS_UART_PORT            (1)
  44 #define CONFIG_BAUDRATE                 115200
  45
  46 #undef CONFIG_CMD_IMLS
  47
  48 /* NAND support */
  49 #define CONFIG_CMD_NAND
  50 #define CONFIG_CMD_NAND_TRIMFFS
  51
  52 #ifdef CONFIG_CMD_NAND
  53 #define CONFIG_NAND_VF610_NFC
  54 #define CONFIG_SYS_NAND_SELF_INIT
  55 #define CONFIG_USE_ARCH_MEMCPY
  56 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
  57 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  58 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  59
  60 /* UBI */
  61 #define CONFIG_CMD_UBI
  62 #define CONFIG_CMD_UBIFS
  63 #define CONFIG_CMD_MTDPARTS
  64 #define CONFIG_RBTREE
  65 #define CONFIG_LZO
  66 #define CONFIG_MTD_DEVICE
  67 #define CONFIG_MTD_PARTITIONS
  68
  69 /* Dynamic MTD partition support */
  70 #define CONFIG_CMD_MTDPARTS
  71 #define CONFIG_MTD_PARTITIONS
  72 #define CONFIG_MTD_DEVICE
  73 #define MTDIDS_DEFAULT                  "nand0=fsl_nfc"
  74 #define MTDPARTS_DEFAULT                "mtdparts=fsl_nfc:"             \
  75                                         "128k(vf-bcb)ro,"               \
  76                                         "1408k(u-boot)ro,"              \
  77                                         "512k(u-boot-env),"             \
  78                                         "4m(kernel),"                   \
  79                                         "512k(fdt),"            \
  80                                         "-(rootfs)"
  81 #endif
  82
  83 #define CONFIG_MMC
  84 #define CONFIG_FSL_ESDHC
  85 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  86 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  87
  88 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  89
  90 #define CONFIG_CMD_MMC
  91 #define CONFIG_GENERIC_MMC
  92 #define CONFIG_CMD_FAT
  93 #define CONFIG_DOS_PARTITION
  94
  95 #define CONFIG_CMD_PING
  96 #define CONFIG_CMD_DHCP
  97 #define CONFIG_CMD_MII
  98 #define CONFIG_CMD_NET
  99 #define CONFIG_FEC_MXC
 100 #define CONFIG_MII
 101 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 102 #define CONFIG_FEC_XCV_TYPE             RMII
 103 #define CONFIG_FEC_MXC_PHYADDR          0
 104 #define CONFIG_PHYLIB
 105 #define CONFIG_PHY_MICREL
 106
 107 /* QSPI Configs*/
 108 #define CONFIG_FSL_QSPI
 109
 110 #ifdef CONFIG_FSL_QSPI
 111 #define CONFIG_CMD_SF
 112 #define CONFIG_SPI_FLASH
 113 #define CONFIG_SPI_FLASH_SPANSION
 114 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 115 #define FSL_QSPI_FLASH_NUM              2
 116 #define CONFIG_SYS_FSL_QSPI_LE
 117 #endif
 118
 119 /* I2C Configs */
 120 #define CONFIG_CMD_I2C
 121 #define CONFIG_SYS_I2C
 122 #define CONFIG_SYS_I2C_MXC
 123 #define CONFIG_SYS_SPD_BUS_NUM          0
 124
 125 #define CONFIG_BOOTDELAY                3
 126
 127 #define CONFIG_LOADADDR                 0x82000000
 128
 129 /* We boot from the gfxRAM area of the OCRAM. */
 130 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 131 #define CONFIG_BOARD_SIZE_LIMIT         524288
 132
 133 #define CONFIG_EXTRA_ENV_SETTINGS \
 134         "script=boot.scr\0" \
 135         "image=zImage\0" \
 136         "console=ttyLP1\0" \
 137         "fdt_high=0xffffffff\0" \
 138         "initrd_high=0xffffffff\0" \
 139         "fdt_file=vf610-twr.dtb\0" \
 140         "fdt_addr=0x81000000\0" \
 141         "boot_fdt=try\0" \
 142         "ip_dyn=yes\0" \
 143         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 144         "mmcpart=1\0" \
 145         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 146         "update_sd_firmware_filename=u-boot.imx\0" \
 147         "update_sd_firmware=" \
 148                 "if test ${ip_dyn} = yes; then " \
 149                         "setenv get_cmd dhcp; " \
 150                 "else " \
 151                         "setenv get_cmd tftp; " \
 152                 "fi; " \
 153                 "if mmc dev ${mmcdev}; then "   \
 154                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 155                                 "setexpr fw_sz ${filesize} / 0x200; " \
 156                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 157                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 158                         "fi; "  \
 159                 "fi\0" \
 160         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 161                 "root=${mmcroot}\0" \
 162         "loadbootscript=" \
 163                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 164         "bootscript=echo Running bootscript from mmc ...; " \
 165                 "source\0" \
 166         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 167         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 168         "mmcboot=echo Booting from mmc ...; " \
 169                 "run mmcargs; " \
 170                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 171                         "if run loadfdt; then " \
 172                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 173                         "else " \
 174                                 "if test ${boot_fdt} = try; then " \
 175                                         "bootz; " \
 176                                 "else " \
 177                                         "echo WARN: Cannot load the DT; " \
 178                                 "fi; " \
 179                         "fi; " \
 180                 "else " \
 181                         "bootz; " \
 182                 "fi;\0" \
 183         "netargs=setenv bootargs console=${console},${baudrate} " \
 184                 "root=/dev/nfs " \
 185         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 186                 "netboot=echo Booting from net ...; " \
 187                 "run netargs; " \
 188                 "if test ${ip_dyn} = yes; then " \
 189                         "setenv get_cmd dhcp; " \
 190                 "else " \
 191                         "setenv get_cmd tftp; " \
 192                 "fi; " \
 193                 "${get_cmd} ${image}; " \
 194                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 195                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 196                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 197                         "else " \
 198                                 "if test ${boot_fdt} = try; then " \
 199                                         "bootz; " \
 200                                 "else " \
 201                                         "echo WARN: Cannot load the DT; " \
 202                                 "fi; " \
 203                         "fi; " \
 204                 "else " \
 205                         "bootz; " \
 206                 "fi;\0"
 207
 208 #define CONFIG_BOOTCOMMAND \
 209            "mmc dev ${mmcdev}; if mmc rescan; then " \
 210                    "if run loadbootscript; then " \
 211                            "run bootscript; " \
 212                    "else " \
 213                            "if run loadimage; then " \
 214                                    "run mmcboot; " \
 215                            "else run netboot; " \
 216                            "fi; " \
 217                    "fi; " \
 218            "else run netboot; fi"
 219
 220 /* Miscellaneous configurable options */
 221 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 222 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 223 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 224 #undef CONFIG_AUTO_COMPLETE
 225 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 226 #define CONFIG_SYS_PBSIZE               \
 227                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 228 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 229 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 230
 231 #define CONFIG_CMD_MEMTEST
 232 #define CONFIG_SYS_MEMTEST_START        0x80010000
 233 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 234
 235 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 236
 237 /*
 238  * Stack sizes
 239  * The stack sizes are set up in start.S using the settings below
 240  */
 241 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 242
 243 /* Physical memory map */
 244 #define CONFIG_NR_DRAM_BANKS            1
 245 #define PHYS_SDRAM                      (0x80000000)
 246 #define PHYS_SDRAM_SIZE                 (128 * 1024 * 1024)
 247
 248 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 249 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 250 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 251
 252 #define CONFIG_SYS_INIT_SP_OFFSET \
 253         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 254 #define CONFIG_SYS_INIT_SP_ADDR \
 255         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 256
 257 /* FLASH and environment organization */
 258 #define CONFIG_SYS_NO_FLASH
 259
 260 #ifdef CONFIG_ENV_IS_IN_MMC
 261 #define CONFIG_ENV_SIZE                 (8 * 1024)
 262
 263 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 264 #define CONFIG_SYS_MMC_ENV_DEV          0
 265 #endif
 266
 267 #ifdef CONFIG_ENV_IS_IN_NAND
 268 #define CONFIG_ENV_SIZE                 (64 * 2048)
 269 #define CONFIG_ENV_SECT_SIZE            (64 * 2048)
 270 #define CONFIG_ENV_RANGE                (512 * 1024)
 271 #define CONFIG_ENV_OFFSET               0x180000
 272 #endif
 273
 274 #define CONFIG_OF_LIBFDT
 275 #define CONFIG_CMD_BOOTZ
 276
 277 #endif