include/configs/vinco.h

   1 /*
   2  * Configuration settings for the VInCo platform.
   3  *
   4  * Based on the settings for the SAMA5-EK board
   5  * Copyright (C) 2014 Atmel
   6  *                    Bo Shen <voice.shen@atmel.com>
   7  * Copyright (C) 2015 Free Electrons
   8  *                    Gregory CLEMENT gregory.clement@free-electrons.com
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /* No NOR flash, this definition should be put before common header */
  17 #define CONFIG_SYS_NO_FLASH
  18
  19 #include "at91-sama5_common.h"
  20
  21 /* The value in the common file is too far away for the VInCo platform */
  22 #ifdef CONFIG_SYS_TEXT_BASE
  23 #undef CONFIG_SYS_TEXT_BASE
  24 #endif
  25 #define CONFIG_SYS_TEXT_BASE            0x20f00000
  26
  27 /* serial console */
  28 #define CONFIG_ATMEL_USART
  29 #define CONFIG_USART_BASE               ATMEL_BASE_USART3
  30 #define CONFIG_USART_ID                 ATMEL_ID_USART3
  31
  32 /* SDRAM */
  33 #define CONFIG_NR_DRAM_BANKS            1
  34 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  35 #define CONFIG_SYS_SDRAM_SIZE           0x4000000
  36
  37
  38 #define CONFIG_SYS_INIT_SP_ADDR \
  39         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  40
  41 #define CONFIG_SYS_LOAD_ADDR            0x22000000 /* load address */
  42
  43 /* SerialFlash */
  44 #define CONFIG_CMD_SF
  45
  46 #ifdef CONFIG_CMD_SF
  47 #define CONFIG_ATMEL_SPI
  48 #define CONFIG_ATMEL_SPI0
  49 #define CONFIG_SPI_FLASH_STMICRO
  50 #define CONFIG_SF_DEFAULT_BUS           0
  51 #define CONFIG_SF_DEFAULT_CS            0
  52 #define CONFIG_SF_DEFAULT_SPEED         50000000
  53 #define CONFIG_ENV_SPI_MAX_HZ           50000000
  54 #define CONFIG_SF_DEFAULT_MODE          (SPI_MODE_0)
  55 #define CONFIG_ENV_SPI_MODE             (SPI_MODE_0)
  56 #endif
  57
  58
  59 /* MMC */
  60 #define CONFIG_CMD_MMC
  61
  62 #ifdef CONFIG_CMD_MMC
  63 #define CONFIG_SUPPORT_EMMC_BOOT
  64 #define CONFIG_MMC
  65 #define CONFIG_GENERIC_MMC
  66 #define CONFIG_GENERIC_ATMEL_MCI
  67 #define ATMEL_BASE_MMCI                 ATMEL_BASE_MCI1
  68 #define CONFIG_SYS_MMC_CLK_OD           500000
  69
  70 /* For generating MMC partitions */
  71 #define CONFIG_PARTITION_UUIDS
  72 #define CONFIG_RANDOM_UUID
  73 #define CONFIG_EFI_PARTITION
  74 #define CONFIG_CMD_GPT
  75
  76 #endif
  77
  78 /* USB */
  79 #define CONFIG_CMD_USB
  80
  81 #ifdef CONFIG_CMD_USB
  82 #define CONFIG_USB_EHCI
  83 #define CONFIG_USB_EHCI_ATMEL
  84 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
  85 #define CONFIG_USB_STORAGE
  86 #endif
  87
  88 /* USB device */
  89 #define CONFIG_USB_GADGET_DUALSPEED
  90 #define CONFIG_USB_GADGET_ATMEL_USBA
  91 #define CONFIG_USB_ETHER
  92 #define CONFIG_USB_ETH_RNDIS
  93 #define CONFIG_USBNET_MANUFACTURER      "L+G VInCo"
  94
  95 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
  96 #define CONFIG_CMD_FAT
  97 #define CONFIG_DOS_PARTITION
  98 #endif
  99
 100 /* Ethernet Hardware */
 101 #define CONFIG_CMD_MII
 102 #define CONFIG_PHY_SMSC
 103 #define CONFIG_MACB
 104 #define CONFIG_RMII
 105 #define CONFIG_NET_RETRY_COUNT          20
 106 #define CONFIG_MACB_SEARCH_PHY
 107
 108
 109 #define CONFIG_USB_HOST_ETHER
 110 #define CONFIG_USB_ETHER_SMSC95XX
 111 #define CONFIG_USB_ETHER_RNDIS
 112
 113
 114 #ifdef CONFIG_SYS_USE_SERIALFLASH
 115 /* bootstrap + u-boot + env + linux in serial flash */
 116 #define CONFIG_ENV_SPI_BUS      CONFIG_SF_DEFAULT_BUS
 117 #define CONFIG_ENV_SPI_CS       CONFIG_SF_DEFAULT_CS
 118 /* Use our own mapping for the VInCo platform */
 119 #undef CONFIG_ENV_OFFSET
 120 #undef CONFIG_ENV_SIZE
 121
 122 #define CONFIG_ENV_OFFSET       0x10000
 123 #define CONFIG_ENV_SIZE         0x10000
 124
 125 /* Update the bootcommand according to our mapping for the VInCo platform */
 126 #undef CONFIG_BOOTCOMMAND
 127 #define CONFIG_BOOTCOMMAND  "mmc dev 0 0;" \
 128                             "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \
 129                             "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
 130                             "bootz ${loadaddr} -  ${oftaddr}"
 131
 132 #undef CONFIG_BOOTARGS
 133 #define CONFIG_BOOTARGS     "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
 134
 135 #define CONFIG_EXTRA_ENV_SETTINGS \
 136         "kernel_start=0x20000\0" \
 137         "kernel_size=0x800000\0" \
 138         "mmcblksize=0x200\0" \
 139         "oftaddr=0x21000000\0" \
 140         "loadaddr=0x22000000\0" \
 141         "update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \
 142         "sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \
 143         "create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \
 144         "setexpr rootfs_start ${kernel_start} + ${kernel_size};" \
 145         "setenv partitions 'name=kernel,size=${kernel_size}," \
 146         "start=${kernel_start};name=rootfs,size=-';" \
 147         "gpt write mmc 0 ${partitions} \0"\
 148         "f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \
 149         "setexpr fileblksize ${fileblksize} + 1\0" \
 150         "store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \
 151         "setexpr k_blksize ${fileblksize};" \
 152         "setexpr k_offset ${kernel_start} / ${mmcblksize};" \
 153         "mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \
 154         "store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \
 155         "setexpr dtb_blksize ${fileblksize};" \
 156         "setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \
 157         "mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \
 158         "store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \
 159         "setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \
 160         "mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \
 161         "bootdelay=0\0"
 162
 163 #endif
 164 #define CONFIG_ZERO_BOOTDELAY_CHECK
 165
 166 #endif