include/configs/vining_2000.h

   1 /*
   2  * Copyright (C) 2016 samtec automotive software & electronics gmbh
   3  *
   4  * Configuration settings for the Samtec VIN|ING 2000 board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #ifdef CONFIG_SPL
  15 #include "imx6_spl.h"
  16 #endif
  17
  18 /* Size of malloc() pool */
  19 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  20
  21 #define CONFIG_MXC_UART
  22 #define CONFIG_MXC_UART_BASE            UART1_BASE
  23
  24 #define BOOT_TARGET_DEVICES(func) \
  25         func(MMC, mmc, 0) \
  26         func(MMC, mmc, 1) \
  27         func(USB, usb, 0) \
  28         func(PXE, pxe, na) \
  29         func(DHCP, dhcp, na)
  30 #include <config_distro_bootcmd.h>
  31
  32 /* Miscellaneous configurable options */
  33 #define CONFIG_SYS_MEMTEST_START        0x80000000
  34 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x10000)
  35
  36 /* Physical Memory Map */
  37 #define CONFIG_NR_DRAM_BANKS            1
  38 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  39
  40 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  41 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  42 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  43
  44 #define CONFIG_SYS_INIT_SP_OFFSET \
  45         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  46 #define CONFIG_SYS_INIT_SP_ADDR \
  47         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  48
  49 /* MMC Configuration */
  50 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  51
  52 /* I2C Configs */
  53 #define CONFIG_SYS_I2C
  54 #define CONFIG_SYS_I2C_MXC
  55 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  56 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  57 #define CONFIG_SYS_I2C_SPEED              100000
  58
  59 /* PMIC */
  60 #define CONFIG_POWER
  61 #define CONFIG_POWER_I2C
  62 #define CONFIG_POWER_PFUZE100
  63 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  64
  65 /* Network */
  66 #define CONFIG_FEC_MXC
  67 #define CONFIG_MII
  68
  69 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  70 #define CONFIG_FEC_MXC_PHYADDR          0x0
  71
  72 #define CONFIG_FEC_XCV_TYPE             RMII
  73 #define CONFIG_ETHPRIME                 "FEC"
  74
  75 #define CONFIG_PHY_ATHEROS
  76
  77 #ifdef CONFIG_CMD_USB
  78 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  79 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
  80 #define CONFIG_MXC_USB_FLAGS   0
  81 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  82 #endif
  83
  84 #ifdef CONFIG_CMD_PCI
  85 #define CONFIG_PCI_SCAN_SHOW
  86 #define CONFIG_PCIE_IMX
  87 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(4, 6)
  88 #endif
  89
  90 #define CONFIG_IMX_THERMAL
  91
  92 #define CONFIG_PWM_IMX
  93 #define CONFIG_IMX6_PWM_PER_CLK 66000000
  94
  95 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  96 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
  97 #define CONFIG_ENV_SIZE                 SZ_8K
  98 #define CONFIG_ENV_OFFSET_REDUND        (9 * SZ_64K)
  99 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 100
 101 #ifdef CONFIG_ENV_IS_IN_MMC
 102 #define CONFIG_SUPPORT_EMMC_BOOT
 103 #define CONFIG_SUPPORT_EMMC_RPMB
 104 #define CONFIG_SYS_MMC_ENV_DEV          0 /* USDHC4 eMMC */
 105 /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */
 106 #define CONFIG_SYS_MMC_ENV_PART         1 /* boot0 */
 107 #endif
 108
 109 #endif                          /* __CONFIG_H */