include/configs/vme8349.h

   1 /*
   2  * esd vme8349 U-Boot configuration file
   3  * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
   4  *
   5  * (C) Copyright 2006-2010
   6  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   7  *
   8  * reinhard.arlt@esd-electronics.de
   9  * Based on the MPC8349EMDS config.
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 /*
  15  * vme8349 board configuration file.
  16  */
  17
  18 #ifndef __CONFIG_H
  19 #define __CONFIG_H
  20
  21 #define CONFIG_DISPLAY_BOARDINFO
  22
  23 /*
  24  * Top level Makefile configuration choices
  25  */
  26 #ifdef CONFIG_CADDY2
  27 #define VME_CADDY2
  28 #endif
  29
  30 /*
  31  * High Level Configuration Options
  32  */
  33 #define CONFIG_E300             1       /* E300 Family */
  34 #define CONFIG_MPC834x          1       /* MPC834x family */
  35 #define CONFIG_MPC8349          1       /* MPC8349 specific */
  36 #define CONFIG_VME8349          1       /* ESD VME8349 board specific */
  37
  38 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  39
  40 #define CONFIG_MISC_INIT_R
  41
  42 #define CONFIG_PCI
  43 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
  44 #undef CONFIG_MPC83XX_PCI2              /* support for 2nd PCI controller */
  45
  46 #define CONFIG_PCI_66M
  47 #ifdef CONFIG_PCI_66M
  48 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  49 #else
  50 #define CONFIG_83XX_CLKIN       33000000        /* in Hz */
  51 #endif
  52
  53 #ifndef CONFIG_SYS_CLK_FREQ
  54 #ifdef CONFIG_PCI_66M
  55 #define CONFIG_SYS_CLK_FREQ     66000000
  56 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_4X1
  57 #else
  58 #define CONFIG_SYS_CLK_FREQ     33000000
  59 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_8X1
  60 #endif
  61 #endif
  62
  63 #define CONFIG_SYS_IMMR         0xE0000000
  64
  65 #undef CONFIG_SYS_DRAM_TEST                     /* memory test, takes time */
  66 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
  67 #define CONFIG_SYS_MEMTEST_END          0x00100000
  68
  69 /*
  70  * DDR Setup
  71  */
  72 #define CONFIG_DDR_ECC                  /* only for ECC DDR module */
  73 #define CONFIG_DDR_ECC_CMD              /* use DDR ECC user commands */
  74 #define CONFIG_SPD_EEPROM
  75 #define SPD_EEPROM_ADDRESS              0x54
  76 #define CONFIG_SYS_READ_SPD             vme8349_read_spd
  77 #define CONFIG_SYS_83XX_DDR_USES_CS0    /* esd; Fsl board uses CS2/CS3 */
  78
  79 /*
  80  * 32-bit data path mode.
  81  *
  82  * Please note that using this mode for devices with the real density of 64-bit
  83  * effectively reduces the amount of available memory due to the effect of
  84  * wrapping around while translating address to row/columns, for example in the
  85  * 256MB module the upper 128MB get aliased with contents of the lower
  86  * 128MB); normally this define should be used for devices with real 32-bit
  87  * data path.
  88  */
  89 #undef CONFIG_DDR_32BIT
  90
  91 #define CONFIG_SYS_DDR_BASE             0x00000000      /* DDR is sys memory*/
  92 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  93 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  94 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN \
  95                                         | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
  96 #define CONFIG_DDR_2T_TIMING
  97 #define CONFIG_SYS_DDRCDR               (DDRCDR_DHC_EN \
  98                                         | DDRCDR_ODT \
  99                                         | DDRCDR_Q_DRN)
 100                                         /* 0x80080001 */
 101
 102 /*
 103  * FLASH on the Local Bus
 104  */
 105 #define CONFIG_SYS_FLASH_CFI
 106 #define CONFIG_FLASH_CFI_DRIVER                         /* use the CFI driver */
 107 #ifdef VME_CADDY2
 108 #define CONFIG_SYS_FLASH_BASE           0xffc00000      /* start of FLASH   */
 109 #define CONFIG_SYS_FLASH_SIZE           4               /* flash size in MB */
 110 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | \
 111                                          BR_PS_16 |     /*  16bit */ \
 112                                          BR_MS_GPCM |   /*  MSEL = GPCM */ \
 113                                          BR_V)          /* valid */
 114
 115 #define CONFIG_SYS_OR0_PRELIM           (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 116                                         | OR_GPCM_XAM \
 117                                         | OR_GPCM_CSNT \
 118                                         | OR_GPCM_ACS_DIV2 \
 119                                         | OR_GPCM_XACS \
 120                                         | OR_GPCM_SCY_15 \
 121                                         | OR_GPCM_TRLX_SET \
 122                                         | OR_GPCM_EHTR_SET \
 123                                         | OR_GPCM_EAD)
 124                                         /* 0xffc06ff7 */
 125 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 126 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_4MB)
 127 #else
 128 #define CONFIG_SYS_FLASH_BASE           0xf8000000      /* start of FLASH   */
 129 #define CONFIG_SYS_FLASH_SIZE           128             /* flash size in MB */
 130 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | \
 131                                          BR_PS_16 |     /*  16bit */ \
 132                                          BR_MS_GPCM |   /*  MSEL = GPCM */ \
 133                                          BR_V)          /* valid */
 134
 135 #define CONFIG_SYS_OR0_PRELIM           (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 136                                         | OR_GPCM_XAM \
 137                                         | OR_GPCM_CSNT \
 138                                         | OR_GPCM_ACS_DIV2 \
 139                                         | OR_GPCM_XACS \
 140                                         | OR_GPCM_SCY_15 \
 141                                         | OR_GPCM_TRLX_SET \
 142                                         | OR_GPCM_EHTR_SET \
 143                                         | OR_GPCM_EAD)
 144                                         /* 0xf8006ff7 */
 145 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 146 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_128MB)
 147 #endif
 148 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 149
 150 #define CONFIG_SYS_WINDOW1_BASE         0xf0000000
 151 #define CONFIG_SYS_BR1_PRELIM           (CONFIG_SYS_WINDOW1_BASE \
 152                                         | BR_PS_32 \
 153                                         | BR_MS_GPCM \
 154                                         | BR_V)
 155                                         /* 0xF0001801 */
 156 #define CONFIG_SYS_OR1_PRELIM           (OR_AM_256KB \
 157                                         | OR_GPCM_SETA)
 158                                         /* 0xfffc0208 */
 159 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_WINDOW1_BASE
 160 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_256KB)
 161
 162 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 163 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device*/
 164
 165 #undef CONFIG_SYS_FLASH_CHECKSUM
 166 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase TO (ms) */
 167 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write TO (ms) */
 168
 169 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 170
 171 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 172 #define CONFIG_SYS_RAMBOOT
 173 #else
 174 #undef CONFIG_SYS_RAMBOOT
 175 #endif
 176
 177 #define CONFIG_SYS_INIT_RAM_LOCK        1
 178 #define CONFIG_SYS_INIT_RAM_ADDR        0xF7000000      /* Initial RAM addr */
 179 #define CONFIG_SYS_INIT_RAM_SIZE                0x1000          /* size */
 180
 181 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 182                                          GENERATED_GBL_DATA_SIZE)
 183 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 184
 185 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB */
 186 #define CONFIG_SYS_MALLOC_LEN           (256 * 1024)    /* Malloc size */
 187
 188 /*
 189  * Local Bus LCRR and LBCR regs
 190  *    LCRR:  no DLL bypass, Clock divider is 4
 191  * External Local Bus rate is
 192  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 193  */
 194 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 195 #define CONFIG_SYS_LBC_LBCR     0x00000000
 196
 197 #undef CONFIG_SYS_LB_SDRAM      /* if board has SDRAM on local bus */
 198
 199 /*
 200  * Serial Port
 201  */
 202 #define CONFIG_CONS_INDEX       1
 203 #define CONFIG_SYS_NS16550_SERIAL
 204 #define CONFIG_SYS_NS16550_REG_SIZE     1
 205 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 206
 207 #define CONFIG_SYS_BAUDRATE_TABLE  \
 208                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 209
 210 #define CONFIG_SYS_NS16550_COM1         (CONFIG_SYS_IMMR + 0x4500)
 211 #define CONFIG_SYS_NS16550_COM2         (CONFIG_SYS_IMMR + 0x4600)
 212
 213 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 214 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 215 /* Use the HUSH parser */
 216 #define CONFIG_SYS_HUSH_PARSER
 217
 218 /* I2C */
 219 #define CONFIG_SYS_I2C
 220 #define CONFIG_SYS_I2C_FSL
 221 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 222 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 223 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 224 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 225 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 226 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 227 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x69} }
 228 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 229
 230 #define CONFIG_SYS_I2C_8574_ADDR2       0x20    /* I2C1, PCF8574 */
 231
 232 /* TSEC */
 233 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 234 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 235 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 236 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
 237
 238 /*
 239  * General PCI
 240  * Addresses are mapped 1-1.
 241  */
 242 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 243 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 244 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 245 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 246 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 247 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 248 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 249 #define CONFIG_SYS_PCI1_IO_PHYS         0xE2000000
 250 #define CONFIG_SYS_PCI1_IO_SIZE         0x00100000      /* 1M */
 251
 252 #define CONFIG_SYS_PCI2_MEM_BASE        0xA0000000
 253 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 254 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 255 #define CONFIG_SYS_PCI2_MMIO_BASE       0xB0000000
 256 #define CONFIG_SYS_PCI2_MMIO_PHYS       CONFIG_SYS_PCI2_MMIO_BASE
 257 #define CONFIG_SYS_PCI2_MMIO_SIZE       0x10000000      /* 256M */
 258 #define CONFIG_SYS_PCI2_IO_BASE         0x00000000
 259 #define CONFIG_SYS_PCI2_IO_PHYS         0xE2100000
 260 #define CONFIG_SYS_PCI2_IO_SIZE         0x00100000      /* 1M */
 261
 262 #if defined(CONFIG_PCI)
 263
 264 #define PCI_64BIT
 265 #define PCI_ONE_PCI1
 266 #if defined(PCI_64BIT)
 267 #undef PCI_ALL_PCI1
 268 #undef PCI_TWO_PCI1
 269 #undef PCI_ONE_PCI1
 270 #endif
 271
 272 #ifndef VME_CADDY2
 273 #endif
 274 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 275
 276 #undef CONFIG_EEPRO100
 277 #undef CONFIG_TULIP
 278
 279 #if !defined(CONFIG_PCI_PNP)
 280         #define PCI_ENET0_IOADDR        0xFIXME
 281         #define PCI_ENET0_MEMADDR       0xFIXME
 282         #define PCI_IDSEL_NUMBER        0xFIXME
 283 #endif
 284
 285 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 286 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x1957  /* Freescale */
 287
 288 #endif  /* CONFIG_PCI */
 289
 290 /*
 291  * TSEC configuration
 292  */
 293 #ifdef VME_CADDY2
 294 #else
 295 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 296 #endif
 297
 298 #if defined(CONFIG_TSEC_ENET)
 299
 300 #define CONFIG_GMII                     /* MII PHY management */
 301 #define CONFIG_TSEC1
 302 #define CONFIG_TSEC1_NAME       "TSEC0"
 303 #define CONFIG_TSEC2
 304 #define CONFIG_TSEC2_NAME       "TSEC1"
 305 #define CONFIG_PHY_M88E1111
 306 #define TSEC1_PHY_ADDR          0x08
 307 #define TSEC2_PHY_ADDR          0x10
 308 #define TSEC1_PHYIDX            0
 309 #define TSEC2_PHYIDX            0
 310 #define TSEC1_FLAGS             TSEC_GIGABIT
 311 #define TSEC2_FLAGS             TSEC_GIGABIT
 312
 313 /* Options are: TSEC[0-1] */
 314 #define CONFIG_ETHPRIME         "TSEC0"
 315
 316 #endif  /* CONFIG_TSEC_ENET */
 317
 318 /*
 319  * Environment
 320  */
 321 #ifndef CONFIG_SYS_RAMBOOT
 322         #define CONFIG_ENV_IS_IN_FLASH
 323         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0xc0000)
 324         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 325         #define CONFIG_ENV_SIZE         0x2000
 326
 327 /* Address and size of Redundant Environment Sector     */
 328 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 329 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 330
 331 #else
 332         #define CONFIG_SYS_NO_FLASH             /* Flash is not usable now */
 333         #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 334         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 335         #define CONFIG_ENV_SIZE         0x2000
 336 #endif
 337
 338 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 339 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 340
 341 /*
 342  * BOOTP options
 343  */
 344 #define CONFIG_BOOTP_BOOTFILESIZE
 345 #define CONFIG_BOOTP_BOOTPATH
 346 #define CONFIG_BOOTP_GATEWAY
 347 #define CONFIG_BOOTP_HOSTNAME
 348
 349 /*
 350  * Command line configuration.
 351  */
 352 #define CONFIG_CMD_I2C
 353 #define CONFIG_CMD_MII
 354 #define CONFIG_CMD_PING
 355 #define CONFIG_CMD_DATE
 356 #define CONFIG_SYS_RTC_BUS_NUM  0x01
 357 #define CONFIG_SYS_I2C_RTC_ADDR 0x32
 358 #define CONFIG_RTC_RX8025
 359 #define CONFIG_CMD_TSI148
 360
 361 #if defined(CONFIG_PCI)
 362     #define CONFIG_CMD_PCI
 363 #endif
 364
 365 #if defined(CONFIG_SYS_RAMBOOT)
 366     #undef CONFIG_CMD_ENV
 367 #endif
 368
 369 /* Pass Ethernet MAC to VxWorks */
 370 #define CONFIG_SYS_VXWORKS_MAC_PTR      0x000043f0
 371
 372 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 373
 374 /*
 375  * Miscellaneous configurable options
 376  */
 377 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 378 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 379
 380 #if defined(CONFIG_CMD_KGDB)
 381         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 382 #else
 383         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 384 #endif
 385
 386 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 387 #define CONFIG_SYS_MAXARGS      16              /* max num of command args */
 388 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
 389
 390 /*
 391  * For booting Linux, the board info and command line data
 392  * have to be in the first 256 MB of memory, since this is
 393  * the maximum mapped by the Linux kernel during initialization.
 394  */
 395 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)     /* Init Memory map for Linux*/
 396
 397 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 398
 399 #define CONFIG_SYS_HRCW_LOW (\
 400         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 401         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 402         HRCWL_CSB_TO_CLKIN |\
 403         HRCWL_VCO_1X2 |\
 404         HRCWL_CORE_TO_CSB_2X1)
 405
 406 #if defined(PCI_64BIT)
 407 #define CONFIG_SYS_HRCW_HIGH (\
 408         HRCWH_PCI_HOST |\
 409         HRCWH_64_BIT_PCI |\
 410         HRCWH_PCI1_ARBITER_ENABLE |\
 411         HRCWH_PCI2_ARBITER_DISABLE |\
 412         HRCWH_CORE_ENABLE |\
 413         HRCWH_FROM_0X00000100 |\
 414         HRCWH_BOOTSEQ_DISABLE |\
 415         HRCWH_SW_WATCHDOG_DISABLE |\
 416         HRCWH_ROM_LOC_LOCAL_16BIT |\
 417         HRCWH_TSEC1M_IN_GMII |\
 418         HRCWH_TSEC2M_IN_GMII)
 419 #else
 420 #define CONFIG_SYS_HRCW_HIGH (\
 421         HRCWH_PCI_HOST |\
 422         HRCWH_32_BIT_PCI |\
 423         HRCWH_PCI1_ARBITER_ENABLE |\
 424         HRCWH_PCI2_ARBITER_ENABLE |\
 425         HRCWH_CORE_ENABLE |\
 426         HRCWH_FROM_0X00000100 |\
 427         HRCWH_BOOTSEQ_DISABLE |\
 428         HRCWH_SW_WATCHDOG_DISABLE |\
 429         HRCWH_ROM_LOC_LOCAL_16BIT |\
 430         HRCWH_TSEC1M_IN_GMII |\
 431         HRCWH_TSEC2M_IN_GMII)
 432 #endif
 433
 434 /* System IO Config */
 435 #define CONFIG_SYS_SICRH 0
 436 #define CONFIG_SYS_SICRL SICRL_LDP_A
 437
 438 #define CONFIG_SYS_HID0_INIT    0x000000000
 439 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 440                                  HID0_ENABLE_INSTRUCTION_CACHE)
 441
 442 #define CONFIG_SYS_HID2         HID2_HBE
 443
 444 #define CONFIG_SYS_GPIO1_PRELIM
 445 #define CONFIG_SYS_GPIO1_DIR    0x00100000
 446 #define CONFIG_SYS_GPIO1_DAT    0x00100000
 447
 448 #define CONFIG_SYS_GPIO2_PRELIM
 449 #define CONFIG_SYS_GPIO2_DIR    0x78900000
 450 #define CONFIG_SYS_GPIO2_DAT    0x70100000
 451
 452 #define CONFIG_HIGH_BATS                /* High BATs supported */
 453
 454 /* DDR @ 0x00000000 */
 455 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \
 456                                  BATL_MEMCOHERENCE)
 457 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
 458                                  BATU_VS | BATU_VP)
 459
 460 /* PCI @ 0x80000000 */
 461 #ifdef CONFIG_PCI
 462 #define CONFIG_PCI_INDIRECT_BRIDGE
 463 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | \
 464                                  BATL_MEMCOHERENCE)
 465 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \
 466                                  BATU_VS | BATU_VP)
 467 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_RW | \
 468                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 469 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \
 470                                  BATU_VS | BATU_VP)
 471 #else
 472 #define CONFIG_SYS_IBAT1L       (0)
 473 #define CONFIG_SYS_IBAT1U       (0)
 474 #define CONFIG_SYS_IBAT2L       (0)
 475 #define CONFIG_SYS_IBAT2U       (0)
 476 #endif
 477
 478 #ifdef CONFIG_MPC83XX_PCI2
 479 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_RW | \
 480                                  BATL_MEMCOHERENCE)
 481 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \
 482                                  BATU_VS | BATU_VP)
 483 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_RW | \
 484                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 485 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \
 486                                  BATU_VS | BATU_VP)
 487 #else
 488 #define CONFIG_SYS_IBAT3L       (0)
 489 #define CONFIG_SYS_IBAT3U       (0)
 490 #define CONFIG_SYS_IBAT4L       (0)
 491 #define CONFIG_SYS_IBAT4U       (0)
 492 #endif
 493
 494 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
 495 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR | BATL_PP_RW | \
 496                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 497 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR | BATU_BL_256M | \
 498                                  BATU_VS | BATU_VP)
 499
 500 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_RW | BATL_MEMCOHERENCE)
 501 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 502
 503 #if (CONFIG_SYS_DDR_SIZE == 512)
 504 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
 505                                  BATL_PP_RW | BATL_MEMCOHERENCE)
 506 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
 507                                  BATU_BL_256M | BATU_VS | BATU_VP)
 508 #else
 509 #define CONFIG_SYS_IBAT7L       (0)
 510 #define CONFIG_SYS_IBAT7U       (0)
 511 #endif
 512
 513 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 514 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 515 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 516 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 517 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 518 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 519 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 520 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 521 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 522 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 523 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 524 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 525 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 526 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 527 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 528 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 529
 530 #if defined(CONFIG_CMD_KGDB)
 531 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 532 #endif
 533
 534 /*
 535  * Environment Configuration
 536  */
 537 #define CONFIG_ENV_OVERWRITE
 538
 539 #if defined(CONFIG_TSEC_ENET)
 540 #define CONFIG_HAS_ETH0
 541 #define CONFIG_HAS_ETH1
 542 #endif
 543
 544 #define CONFIG_HOSTNAME         VME8349
 545 #define CONFIG_ROOTPATH         "/tftpboot/rootfs"
 546 #define CONFIG_BOOTFILE         "uImage"
 547
 548 #define CONFIG_LOADADDR         800000  /* def location for tftp and bootm */
 549
 550 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 551 #undef  CONFIG_BOOTARGS                 /* boot command will set bootargs */
 552
 553 #define CONFIG_BAUDRATE  9600
 554
 555 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 556         "netdev=eth0\0"                                                 \
 557         "hostname=vme8349\0"                                            \
 558         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 559                 "nfsroot=${serverip}:${rootpath}\0"                     \
 560         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 561         "addip=setenv bootargs ${bootargs} "                            \
 562                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 563                 ":${hostname}:${netdev}:off panic=1\0"                  \
 564         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 565         "flash_nfs=run nfsargs addip addtty;"                           \
 566                 "bootm ${kernel_addr}\0"                                \
 567         "flash_self=run ramargs addip addtty;"                          \
 568                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 569         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 570                 "bootm\0"                                               \
 571         "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0"              \
 572         "update=protect off fff00000 fff3ffff; "                        \
 573                 "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
 574         "upd=run load update\0"                                         \
 575         "fdtaddr=780000\0"                                              \
 576         "fdtfile=vme8349.dtb\0"                                         \
 577         ""
 578
 579 #define CONFIG_NFSBOOTCOMMAND                                           \
 580         "setenv bootargs root=/dev/nfs rw "                             \
 581                 "nfsroot=$serverip:$rootpath "                          \
 582                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 583                                                         "$netdev:off "  \
 584                 "console=$consoledev,$baudrate $othbootargs;"           \
 585         "tftp $loadaddr $bootfile;"                                     \
 586         "tftp $fdtaddr $fdtfile;"                                       \
 587         "bootm $loadaddr - $fdtaddr"
 588
 589 #define CONFIG_RAMBOOTCOMMAND                                           \
 590         "setenv bootargs root=/dev/ram rw "                             \
 591                 "console=$consoledev,$baudrate $othbootargs;"           \
 592         "tftp $ramdiskaddr $ramdiskfile;"                               \
 593         "tftp $loadaddr $bootfile;"                                     \
 594         "tftp $fdtaddr $fdtfile;"                                       \
 595         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 596
 597 #define CONFIG_BOOTCOMMAND      "run flash_self"
 598
 599 #ifndef __ASSEMBLY__
 600 int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
 601                      unsigned char *buffer, int len);
 602 #endif
 603
 604 #endif  /* __CONFIG_H */