include/configs/vme8349.h

   1 /*
   2  * esd vme8349 U-Boot configuration file
   3  * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
   4  *
   5  * (C) Copyright 2006
   6  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   7  *
   8  * reinhard.arlt@esd-electronics.de
   9  * Based on the MPC8349EMDS config.
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 /*
  31  * vme8349 board configuration file.
  32  */
  33
  34 #ifndef __CONFIG_H
  35 #define __CONFIG_H
  36
  37 /*
  38  * Top level Makefile configuration choices
  39  */
  40 #ifdef CONFIG_MK_caddy2
  41 #define VME_CADDY2
  42 #endif
  43
  44 /*
  45  * High Level Configuration Options
  46  */
  47 #define CONFIG_E300             1       /* E300 Family */
  48 #define CONFIG_MPC83xx          1       /* MPC83xx family */
  49 #define CONFIG_MPC834x          1       /* MPC834x family */
  50 #define CONFIG_MPC8349          1       /* MPC8349 specific */
  51 #define CONFIG_VME8349          1       /* ESD VME8349 board specific */
  52
  53 #define CONFIG_MISC_INIT_R
  54
  55 #define CONFIG_PCI
  56 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
  57 #undef CONFIG_MPC83XX_PCI2              /* support for 2nd PCI controller */
  58
  59 #define PCI_66M
  60 #ifdef PCI_66M
  61 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  62 #else
  63 #define CONFIG_83XX_CLKIN       33000000        /* in Hz */
  64 #endif
  65
  66 #ifndef CONFIG_SYS_CLK_FREQ
  67 #ifdef PCI_66M
  68 #define CONFIG_SYS_CLK_FREQ     66000000
  69 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_4X1
  70 #else
  71 #define CONFIG_SYS_CLK_FREQ     33000000
  72 #define HRCWL_CSB_TO_CLKIN      HRCWL_CSB_TO_CLKIN_8X1
  73 #endif
  74 #endif
  75
  76 #define CONFIG_SYS_IMMR         0xE0000000
  77
  78 #undef CONFIG_SYS_DRAM_TEST                     /* memory test, takes time */
  79 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
  80 #define CONFIG_SYS_MEMTEST_END          0x00100000
  81
  82 /*
  83  * DDR Setup
  84  */
  85 #define CONFIG_DDR_ECC                  /* only for ECC DDR module */
  86 #define CONFIG_DDR_ECC_CMD              /* use DDR ECC user commands */
  87 #define CONFIG_SPD_EEPROM
  88 #define SPD_EEPROM_ADDRESS              0x54
  89 #define CONFIG_SYS_READ_SPD             vme8349_read_spd
  90 #define CONFIG_SYS_83XX_DDR_USES_CS0    /* esd; Fsl board uses CS2/CS3 */
  91
  92 /*
  93  * 32-bit data path mode.
  94  *
  95  * Please note that using this mode for devices with the real density of 64-bit
  96  * effectively reduces the amount of available memory due to the effect of
  97  * wrapping around while translating address to row/columns, for example in the
  98  * 256MB module the upper 128MB get aliased with contents of the lower
  99  * 128MB); normally this define should be used for devices with real 32-bit
 100  * data path.
 101  */
 102 #undef CONFIG_DDR_32BIT
 103
 104 #define CONFIG_SYS_DDR_BASE             0x00000000      /* DDR is sys memory*/
 105 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
 106 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
 107 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
 108                                          DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
 109 #define CONFIG_DDR_2T_TIMING
 110 #define CONFIG_SYS_DDRCDR               0x80080001
 111
 112 /*
 113  * FLASH on the Local Bus
 114  */
 115 #define CONFIG_SYS_FLASH_CFI
 116 #define CONFIG_FLASH_CFI_DRIVER                         /* use the CFI driver */
 117 #ifdef VME_CADDY2
 118 #define CONFIG_SYS_FLASH_BASE           0xffc00000      /* start of FLASH   */
 119 #define CONFIG_SYS_FLASH_SIZE           4               /* flash size in MB */
 120 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | \
 121                                          (2 << BR_PS_SHIFT) |   /*  16bit */ \
 122                                          BR_V)                  /* valid */
 123
 124 #define CONFIG_SYS_OR0_PRELIM           0xffc06ff7      /*   4 MB flash size */
 125 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 126 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x80000015      /*   4 MB window size */
 127 #else
 128 #define CONFIG_SYS_FLASH_BASE           0xf8000000      /* start of FLASH   */
 129 #define CONFIG_SYS_FLASH_SIZE           128             /* flash size in MB */
 130 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | \
 131                                          (2 << BR_PS_SHIFT) |   /*  16bit */ \
 132                                          BR_V)                  /* valid */
 133
 134 #define CONFIG_SYS_OR0_PRELIM           0xf8006ff7      /* 128 MB flash size */
 135 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 136 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x8000001a      /* 128 MB window size */
 137 #endif
 138 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 139
 140 #define CONFIG_SYS_BR1_PRELIM           (0xf0000000 | 0x00001801)
 141 #define CONFIG_SYS_OR1_PRELIM           (0xfffc0008 | 0x00000200)
 142 #define CONFIG_SYS_LBLAWBAR1_PRELIM     0xf0000000
 143 #define CONFIG_SYS_LBLAWAR1_PRELIM      (0x80000000 | 0x00000011)
 144
 145 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 146 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device*/
 147
 148 #undef CONFIG_SYS_FLASH_CHECKSUM
 149 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase TO (ms) */
 150 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write TO (ms) */
 151
 152 #define CONFIG_SYS_MONITOR_BASE         TEXT_BASE       /* start of monitor */
 153
 154 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 155 #define CONFIG_SYS_RAMBOOT
 156 #else
 157 #undef CONFIG_SYS_RAMBOOT
 158 #endif
 159
 160 #define CONFIG_SYS_INIT_RAM_LOCK        1
 161 #define CONFIG_SYS_INIT_RAM_ADDR        0xF7000000      /* Initial RAM addr */
 162 #define CONFIG_SYS_INIT_RAM_END         0x1000          /* size */
 163
 164 #define CONFIG_SYS_GBL_DATA_SIZE        0x100           /* size init data */
 165 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - \
 166                                          CONFIG_SYS_GBL_DATA_SIZE)
 167 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 168
 169 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256 kB */
 170 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Malloc size */
 171
 172 /*
 173  * Local Bus LCRR and LBCR regs
 174  *    LCRR:  no DLL bypass, Clock divider is 4
 175  * External Local Bus rate is
 176  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 177  */
 178 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 179 #define CONFIG_SYS_LBC_LBCR     0x00000000
 180
 181 #undef CONFIG_SYS_LB_SDRAM      /* if board has SDRAM on local bus */
 182
 183 /*
 184  * Serial Port
 185  */
 186 #define CONFIG_CONS_INDEX       1
 187 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 188 #define CONFIG_SYS_NS16550
 189 #define CONFIG_SYS_NS16550_SERIAL
 190 #define CONFIG_SYS_NS16550_REG_SIZE     1
 191 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 192
 193 #define CONFIG_SYS_BAUDRATE_TABLE  \
 194         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 195
 196 #define CONFIG_SYS_NS16550_COM1         (CONFIG_SYS_IMMR + 0x4500)
 197 #define CONFIG_SYS_NS16550_COM2         (CONFIG_SYS_IMMR + 0x4600)
 198
 199 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
 200 /* Use the HUSH parser */
 201 #define CONFIG_SYS_HUSH_PARSER
 202 #ifdef CONFIG_SYS_HUSH_PARSER
 203 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 204 #endif
 205
 206 /* pass open firmware flat tree */
 207 #define CONFIG_OF_LIBFDT
 208 #define CONFIG_OF_BOARD_SETUP
 209 #define CONFIG_OF_STDOUT_VIA_ALIAS
 210
 211 /* I2C */
 212 #define CONFIG_I2C_MULTI_BUS
 213 #define CONFIG_HARD_I2C         /* I2C with hardware support*/
 214 #undef CONFIG_SOFT_I2C          /* I2C bit-banged */
 215 #define CONFIG_FSL_I2C
 216 #define CONFIG_I2C_CMD_TREE
 217 #define CONFIG_SYS_I2C_SPEED    400000  /* I2C speed and slave address */
 218 #define CONFIG_SYS_I2C_SLAVE    0x7F
 219 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x69}} /* Don't probe these addrs */
 220 #define CONFIG_SYS_I2C1_OFFSET  0x3000
 221 #define CONFIG_SYS_I2C2_OFFSET  0x3100
 222 #define CONFIG_SYS_I2C_OFFSET   CONFIG_SYS_I2C1_OFFSET
 223 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
 224
 225 #define CONFIG_SYS_I2C_8574_ADDR2       0x20    /* I2C1, PCF8574 */
 226
 227 /* TSEC */
 228 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 229 #define CONFIG_SYS_TSEC1        (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 230 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 231 #define CONFIG_SYS_TSEC2        (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
 232
 233 /*
 234  * General PCI
 235  * Addresses are mapped 1-1.
 236  */
 237 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 238 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 239 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 240 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 241 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 242 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 243 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 244 #define CONFIG_SYS_PCI1_IO_PHYS         0xE2000000
 245 #define CONFIG_SYS_PCI1_IO_SIZE         0x00100000      /* 1M */
 246
 247 #define CONFIG_SYS_PCI2_MEM_BASE        0xA0000000
 248 #define CONFIG_SYS_PCI2_MEM_PHYS        CONFIG_SYS_PCI2_MEM_BASE
 249 #define CONFIG_SYS_PCI2_MEM_SIZE        0x10000000      /* 256M */
 250 #define CONFIG_SYS_PCI2_MMIO_BASE       0xB0000000
 251 #define CONFIG_SYS_PCI2_MMIO_PHYS       CONFIG_SYS_PCI2_MMIO_BASE
 252 #define CONFIG_SYS_PCI2_MMIO_SIZE       0x10000000      /* 256M */
 253 #define CONFIG_SYS_PCI2_IO_BASE         0x00000000
 254 #define CONFIG_SYS_PCI2_IO_PHYS         0xE2100000
 255 #define CONFIG_SYS_PCI2_IO_SIZE         0x00100000      /* 1M */
 256
 257 #if defined(CONFIG_PCI)
 258
 259 #define PCI_64BIT
 260 #define PCI_ONE_PCI1
 261 #if defined(PCI_64BIT)
 262 #undef PCI_ALL_PCI1
 263 #undef PCI_TWO_PCI1
 264 #undef PCI_ONE_PCI1
 265 #endif
 266
 267 #ifndef VME_CADDY2
 268 #define CONFIG_NET_MULTI
 269 #endif
 270 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 271
 272 #undef CONFIG_EEPRO100
 273 #undef CONFIG_TULIP
 274
 275 #if !defined(CONFIG_PCI_PNP)
 276         #define PCI_ENET0_IOADDR        0xFIXME
 277         #define PCI_ENET0_MEMADDR       0xFIXME
 278         #define PCI_IDSEL_NUMBER        0xFIXME
 279 #endif
 280
 281 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 282 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x1957  /* Freescale */
 283
 284 #endif  /* CONFIG_PCI */
 285
 286 /*
 287  * TSEC configuration
 288  */
 289 #ifdef VME_CADDY2
 290 #define CONFIG_E1000
 291 #else
 292 #define CONFIG_TSEC_ENET                /* TSEC ethernet support */
 293 #endif
 294
 295 #if defined(CONFIG_TSEC_ENET)
 296 #ifndef CONFIG_NET_MULTI
 297 #define CONFIG_NET_MULTI
 298 #endif
 299
 300 #define CONFIG_GMII                     /* MII PHY management */
 301 #define CONFIG_TSEC1
 302 #define CONFIG_TSEC1_NAME       "TSEC0"
 303 #define CONFIG_TSEC2
 304 #define CONFIG_TSEC2_NAME       "TSEC1"
 305 #define CONFIG_PHY_M88E1111
 306 #define TSEC1_PHY_ADDR          0x08
 307 #define TSEC2_PHY_ADDR          0x10
 308 #define TSEC1_PHYIDX            0
 309 #define TSEC2_PHYIDX            0
 310 #define TSEC1_FLAGS             TSEC_GIGABIT
 311 #define TSEC2_FLAGS             TSEC_GIGABIT
 312
 313 /* Options are: TSEC[0-1] */
 314 #define CONFIG_ETHPRIME         "TSEC0"
 315
 316 #endif  /* CONFIG_TSEC_ENET */
 317
 318 #if defined(CONFIG_E1000)
 319 #ifndef CONFIG_NET_MULTI
 320 #define CONFIG_NET_MULTI
 321 #endif
 322 #endif
 323
 324 /*
 325  * Environment
 326  */
 327 #ifndef CONFIG_SYS_RAMBOOT
 328         #define CONFIG_ENV_IS_IN_FLASH
 329         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0xc0000)
 330         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 331         #define CONFIG_ENV_SIZE         0x2000
 332
 333 /* Address and size of Redundant Environment Sector     */
 334 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 335 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 336
 337 #else
 338         #define CONFIG_SYS_NO_FLASH             /* Flash is not usable now */
 339         #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 340         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 341         #define CONFIG_ENV_SIZE         0x2000
 342 #endif
 343
 344 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 345 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 346
 347 /*
 348  * BOOTP options
 349  */
 350 #define CONFIG_BOOTP_BOOTFILESIZE
 351 #define CONFIG_BOOTP_BOOTPATH
 352 #define CONFIG_BOOTP_GATEWAY
 353 #define CONFIG_BOOTP_HOSTNAME
 354
 355 /*
 356  * Command line configuration.
 357  */
 358 #include <config_cmd_default.h>
 359
 360 #define CONFIG_CMD_I2C
 361 #define CONFIG_CMD_MII
 362 #define CONFIG_CMD_PING
 363 #define CONFIG_CMD_DATE
 364 #define CONFIG_SYS_RTC_BUS_NUM  0x01
 365 #define CONFIG_SYS_I2C_RTC_ADDR 0x32
 366 #define CONFIG_RTC_RX8025
 367 #define CONFIG_CMD_TSI148
 368
 369 #if defined(CONFIG_PCI)
 370     #define CONFIG_CMD_PCI
 371 #endif
 372
 373 #if defined(CONFIG_SYS_RAMBOOT)
 374     #undef CONFIG_CMD_ENV
 375     #undef CONFIG_CMD_LOADS
 376 #endif
 377
 378 #define CONFIG_CMD_ELF
 379 /* Pass Ethernet MAC to VxWorks */
 380 #define CONFIG_SYS_VXWORKS_MAC_PTR      0x000043f0
 381
 382 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 383
 384 /*
 385  * Miscellaneous configurable options
 386  */
 387 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 388 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 389 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 390
 391 #if defined(CONFIG_CMD_KGDB)
 392         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 393 #else
 394         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 395 #endif
 396
 397 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 398 #define CONFIG_SYS_MAXARGS      16              /* max num of command args */
 399 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
 400 #define CONFIG_SYS_HZ           1000            /* decr freq: 1ms ticks */
 401
 402 /*
 403  * For booting Linux, the board info and command line data
 404  * have to be in the first 8 MB of memory, since this is
 405  * the maximum mapped by the Linux kernel during initialization.
 406  */
 407 #define CONFIG_SYS_BOOTMAPSZ    (8 << 20)       /* Init Memory map for Linux*/
 408
 409 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
 410
 411 #define CONFIG_SYS_HRCW_LOW (\
 412         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
 413         HRCWL_DDR_TO_SCB_CLK_1X1 |\
 414         HRCWL_CSB_TO_CLKIN |\
 415         HRCWL_VCO_1X2 |\
 416         HRCWL_CORE_TO_CSB_2X1)
 417
 418 #if defined(PCI_64BIT)
 419 #define CONFIG_SYS_HRCW_HIGH (\
 420         HRCWH_PCI_HOST |\
 421         HRCWH_64_BIT_PCI |\
 422         HRCWH_PCI1_ARBITER_ENABLE |\
 423         HRCWH_PCI2_ARBITER_DISABLE |\
 424         HRCWH_CORE_ENABLE |\
 425         HRCWH_FROM_0X00000100 |\
 426         HRCWH_BOOTSEQ_DISABLE |\
 427         HRCWH_SW_WATCHDOG_DISABLE |\
 428         HRCWH_ROM_LOC_LOCAL_16BIT |\
 429         HRCWH_TSEC1M_IN_GMII |\
 430         HRCWH_TSEC2M_IN_GMII)
 431 #else
 432 #define CONFIG_SYS_HRCW_HIGH (\
 433         HRCWH_PCI_HOST |\
 434         HRCWH_32_BIT_PCI |\
 435         HRCWH_PCI1_ARBITER_ENABLE |\
 436         HRCWH_PCI2_ARBITER_ENABLE |\
 437         HRCWH_CORE_ENABLE |\
 438         HRCWH_FROM_0X00000100 |\
 439         HRCWH_BOOTSEQ_DISABLE |\
 440         HRCWH_SW_WATCHDOG_DISABLE |\
 441         HRCWH_ROM_LOC_LOCAL_16BIT |\
 442         HRCWH_TSEC1M_IN_GMII |\
 443         HRCWH_TSEC2M_IN_GMII)
 444 #endif
 445
 446 /* System IO Config */
 447 #define CONFIG_SYS_SICRH 0
 448 #define CONFIG_SYS_SICRL SICRL_LDP_A
 449
 450 #define CONFIG_SYS_HID0_INIT    0x000000000
 451 #define CONFIG_SYS_HID0_FINAL   HID0_ENABLE_MACHINE_CHECK
 452
 453 #define CONFIG_SYS_HID2         HID2_HBE
 454
 455 #define CONFIG_SYS_GPIO1_PRELIM
 456 #define CONFIG_SYS_GPIO1_DIR    0x00100000
 457 #define CONFIG_SYS_GPIO1_DAT    0x00100000
 458
 459 #define CONFIG_SYS_GPIO2_PRELIM
 460 #define CONFIG_SYS_GPIO2_DIR    0x78900000
 461 #define CONFIG_SYS_GPIO2_DAT    0x70100000
 462
 463 #define CONFIG_HIGH_BATS                /* High BATs supported */
 464
 465 /* DDR @ 0x00000000 */
 466 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
 467                                  BATL_MEMCOHERENCE)
 468 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
 469                                  BATU_VS | BATU_VP)
 470
 471 /* PCI @ 0x80000000 */
 472 #ifdef CONFIG_PCI
 473 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | \
 474                                  BATL_MEMCOHERENCE)
 475 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \
 476                                  BATU_VS | BATU_VP)
 477 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \
 478                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 479 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \
 480                                  BATU_VS | BATU_VP)
 481 #else
 482 #define CONFIG_SYS_IBAT1L       (0)
 483 #define CONFIG_SYS_IBAT1U       (0)
 484 #define CONFIG_SYS_IBAT2L       (0)
 485 #define CONFIG_SYS_IBAT2U       (0)
 486 #endif
 487
 488 #ifdef CONFIG_MPC83XX_PCI2
 489 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | \
 490                                  BATL_MEMCOHERENCE)
 491 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \
 492                                  BATU_VS | BATU_VP)
 493 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | \
 494                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 495 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \
 496                                  BATU_VS | BATU_VP)
 497 #else
 498 #define CONFIG_SYS_IBAT3L       (0)
 499 #define CONFIG_SYS_IBAT3U       (0)
 500 #define CONFIG_SYS_IBAT4L       (0)
 501 #define CONFIG_SYS_IBAT4U       (0)
 502 #endif
 503
 504 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
 505 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR | BATL_PP_10 | \
 506                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 507 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR | BATU_BL_256M | \
 508                                  BATU_VS | BATU_VP)
 509
 510 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
 511 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 512
 513 #if (CONFIG_SYS_DDR_SIZE == 512)
 514 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
 515                                  BATL_PP_10 | BATL_MEMCOHERENCE)
 516 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
 517                                  BATU_BL_256M | BATU_VS | BATU_VP)
 518 #else
 519 #define CONFIG_SYS_IBAT7L       (0)
 520 #define CONFIG_SYS_IBAT7U       (0)
 521 #endif
 522
 523 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 524 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 525 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 526 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 527 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 528 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 529 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 530 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 531 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 532 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 533 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 534 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 535 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 536 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 537 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 538 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 539
 540 /*
 541  * Internal Definitions
 542  *
 543  * Boot Flags
 544  */
 545 #define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH */
 546 #define BOOTFLAG_WARM   0x02    /* Software reboot */
 547
 548 #if defined(CONFIG_CMD_KGDB)
 549 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 550 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 551 #endif
 552
 553 /*
 554  * Environment Configuration
 555  */
 556 #define CONFIG_ENV_OVERWRITE
 557
 558 #if defined(CONFIG_TSEC_ENET)
 559 #define CONFIG_HAS_ETH0
 560 #define CONFIG_HAS_ETH1
 561 #endif
 562
 563 #define CONFIG_HOSTNAME         VME8349
 564 #define CONFIG_ROOTPATH         /tftpboot/rootfs
 565 #define CONFIG_BOOTFILE         uImage
 566
 567 #define CONFIG_LOADADDR         800000  /* def location for tftp and bootm */
 568
 569 #define CONFIG_BOOTDELAY        6       /* -1 disables auto-boot */
 570 #undef  CONFIG_BOOTARGS                 /* boot command will set bootargs */
 571
 572 #define CONFIG_BAUDRATE  9600
 573
 574 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 575         "netdev=eth0\0"                                                 \
 576         "hostname=vme8349\0"                                            \
 577         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 578                 "nfsroot=${serverip}:${rootpath}\0"                     \
 579         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 580         "addip=setenv bootargs ${bootargs} "                            \
 581                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 582                 ":${hostname}:${netdev}:off panic=1\0"                  \
 583         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 584         "flash_nfs=run nfsargs addip addtty;"                           \
 585                 "bootm ${kernel_addr}\0"                                \
 586         "flash_self=run ramargs addip addtty;"                          \
 587                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 588         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 589                 "bootm\0"                                               \
 590         "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0"              \
 591         "update=protect off fff00000 fff3ffff; "                        \
 592                 "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
 593         "upd=run load update\0"                                         \
 594         "fdtaddr=780000\0"                                              \
 595         "fdtfile=vme8349.dtb\0"                                         \
 596         ""
 597
 598 #define CONFIG_NFSBOOTCOMMAND                                           \
 599    "setenv bootargs root=/dev/nfs rw "                                  \
 600       "nfsroot=$serverip:$rootpath "                                    \
 601       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 602       "console=$consoledev,$baudrate $othbootargs;"                     \
 603    "tftp $loadaddr $bootfile;"                                          \
 604    "tftp $fdtaddr $fdtfile;"                                            \
 605    "bootm $loadaddr - $fdtaddr"
 606
 607 #define CONFIG_RAMBOOTCOMMAND                                           \
 608    "setenv bootargs root=/dev/ram rw "                                  \
 609       "console=$consoledev,$baudrate $othbootargs;"                     \
 610    "tftp $ramdiskaddr $ramdiskfile;"                                    \
 611    "tftp $loadaddr $bootfile;"                                          \
 612    "tftp $fdtaddr $fdtfile;"                                            \
 613    "bootm $loadaddr $ramdiskaddr $fdtaddr"
 614
 615 #define CONFIG_BOOTCOMMAND      "run flash_self"
 616
 617 #ifndef __ASSEMBLY__
 618 int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
 619                      unsigned char *buffer, int len);
 620 #endif
 621
 622 #endif  /* __CONFIG_H */