include/configs/wandboard.h

   1 /*
   2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Wandboard.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <config_distro_defaults.h>
  13 #include "mx6_common.h"
  14
  15 #include "imx6_spl.h"
  16
  17 #define MACH_TYPE_WANDBOARD             4412
  18 #define CONFIG_MACH_TYPE                MACH_TYPE_WANDBOARD
  19
  20 /* Size of malloc() pool */
  21 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  22
  23 #define CONFIG_BOARD_EARLY_INIT_F
  24 #define CONFIG_BOARD_LATE_INIT
  25
  26 #define CONFIG_MXC_UART
  27 #define CONFIG_MXC_UART_BASE            UART1_BASE
  28
  29 /* SATA Configs */
  30
  31 #define CONFIG_CMD_SATA
  32 #ifdef CONFIG_CMD_SATA
  33 #define CONFIG_DWC_AHSATA
  34 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  35 #define CONFIG_DWC_AHSATA_PORT_ID       0
  36 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  37 #define CONFIG_LBA48
  38 #define CONFIG_LIBATA
  39 #endif
  40
  41 /* Command definition */
  42 #define CONFIG_CMD_BMODE
  43
  44 #define CONFIG_SYS_MEMTEST_START        0x10000000
  45 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  46
  47 /* I2C Configs */
  48 #define CONFIG_SYS_I2C
  49 #define CONFIG_SYS_I2C_MXC
  50 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  51 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  52 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  53 #define CONFIG_SYS_I2C_SPEED            100000
  54
  55 /* MMC Configuration */
  56 #define CONFIG_SYS_FSL_USDHC_NUM        2
  57 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  58
  59 /* USB Configs */
  60 #define CONFIG_USB_EHCI
  61 #define CONFIG_USB_EHCI_MX6
  62 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  63 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  64 #define CONFIG_MXC_USB_FLAGS            0
  65
  66 /* Ethernet Configuration */
  67 #define CONFIG_FEC_MXC
  68 #define CONFIG_MII
  69 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  70 #define CONFIG_FEC_XCV_TYPE             RGMII
  71 #define CONFIG_ETHPRIME                 "FEC"
  72 #define CONFIG_FEC_MXC_PHYADDR          1
  73 #define CONFIG_PHYLIB
  74 #define CONFIG_PHY_ATHEROS
  75
  76 /* Framebuffer */
  77 #define CONFIG_VIDEO_IPUV3
  78 #define CONFIG_CFB_CONSOLE
  79 #define CONFIG_VGA_AS_SINGLE_DEVICE
  80 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  81 #define CONFIG_VIDEO_BMP_RLE8
  82 #define CONFIG_SPLASH_SCREEN
  83 #define CONFIG_SPLASH_SCREEN_ALIGN
  84 #define CONFIG_BMP_16BPP
  85 #define CONFIG_VIDEO_LOGO
  86 #define CONFIG_VIDEO_BMP_LOGO
  87 #define CONFIG_IPUV3_CLK 260000000
  88 #define CONFIG_CMD_HDMIDETECT
  89 #define CONFIG_IMX_HDMI
  90 #define CONFIG_IMX_VIDEO_SKIP
  91
  92 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  93 #define CONFIG_EXTRA_ENV_SETTINGS \
  94         "console=ttymxc0,115200\0" \
  95         "splashpos=m,m\0" \
  96         "fdtfile=undefined\0" \
  97         "fdt_high=0xffffffff\0" \
  98         "initrd_high=0xffffffff\0" \
  99         "fdt_addr_r=0x18000000\0" \
 100         "fdt_addr=0x18000000\0" \
 101         "ip_dyn=yes\0" \
 102         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 103         "update_sd_firmware_filename=u-boot.imx\0" \
 104         "update_sd_firmware=" \
 105                 "if test ${ip_dyn} = yes; then " \
 106                         "setenv get_cmd dhcp; " \
 107                 "else " \
 108                         "setenv get_cmd tftp; " \
 109                 "fi; " \
 110                 "if mmc dev ${mmcdev}; then "   \
 111                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 112                                 "setexpr fw_sz ${filesize} / 0x200; " \
 113                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 114                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 115                         "fi; "  \
 116                 "fi\0" \
 117         "findfdt="\
 118                 "if test $board_name = C1 && test $board_rev = MX6Q ; then " \
 119                         "setenv fdtfile imx6q-wandboard.dtb; fi; " \
 120                 "if test $board_name = C1 && test $board_rev = MX6DL ; then " \
 121                         "setenv fdtfile imx6dl-wandboard.dtb; fi; " \
 122                 "if test $board_name = B1 && test $board_rev = MX6Q ; then " \
 123                         "setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
 124                 "if test $board_name = B1 && test $board_rev = MX6DL ; then " \
 125                         "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
 126                 "if test $fdtfile = undefined; then " \
 127                         "echo WARNING: Could not determine dtb to use; fi; \0" \
 128         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 129         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
 130         "ramdisk_addr_r=0x13000000\0" \
 131         "ramdiskaddr=0x13000000\0" \
 132         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
 133         BOOTENV
 134
 135 #define BOOT_TARGET_DEVICES(func) \
 136         func(MMC, mmc, 0) \
 137         func(MMC, mmc, 1) \
 138         func(USB, usb, 0) \
 139         func(PXE, pxe, na) \
 140         func(DHCP, dhcp, na)
 141
 142 #define CONFIG_BOOTCOMMAND \
 143            "run findfdt; " \
 144            "run distro_bootcmd"
 145
 146 #include <config_distro_bootcmd.h>
 147
 148 /* Physical Memory Map */
 149 #define CONFIG_NR_DRAM_BANKS            1
 150 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 151
 152 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 153 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 154 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 155
 156 #define CONFIG_SYS_INIT_SP_OFFSET \
 157         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 158 #define CONFIG_SYS_INIT_SP_ADDR \
 159         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 160
 161 /* Environment organization */
 162 #define CONFIG_ENV_SIZE                 (8 * 1024)
 163
 164 #define CONFIG_ENV_IS_IN_MMC
 165 #define CONFIG_ENV_OFFSET               (768 * 1024)
 166 #define CONFIG_SYS_MMC_ENV_DEV          0
 167
 168 #endif                         /* __CONFIG_H * */