include/configs/whistler.h

   1 /*
   2  *  (C) Copyright 2010-2012
   3  *  NVIDIA Corporation <www.nvidia.com>
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #ifndef __CONFIG_H
  25 #define __CONFIG_H
  26
  27 #include <asm/sizes.h>
  28 #include "tegra20-common.h"
  29
  30 /* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
  31 #define CONFIG_DEFAULT_DEVICE_TREE      tegra20-whistler
  32 #define CONFIG_OF_CONTROL
  33 #define CONFIG_OF_SEPARATE
  34
  35 /* High-level configuration options */
  36 #define V_PROMPT                "Tegra20 (Whistler) # "
  37 #define CONFIG_TEGRA20_BOARD_STRING     "NVIDIA Whistler"
  38
  39 /* Board-specific serial config */
  40 #define CONFIG_SERIAL_MULTI
  41 #define CONFIG_TEGRA20_ENABLE_UARTA
  42 #define CONFIG_TEGRA20_UARTA_UAA_UAB
  43 #define CONFIG_SYS_NS16550_COM1         NV_PA_APB_UARTA_BASE
  44
  45 #define CONFIG_MACH_TYPE                MACH_TYPE_WHISTLER
  46
  47 #define CONFIG_BOARD_EARLY_INIT_F
  48
  49 /* I2C */
  50 #define CONFIG_TEGRA_I2C
  51 #define CONFIG_SYS_I2C_INIT_BOARD
  52 #define CONFIG_I2C_MULTI_BUS
  53 #define CONFIG_SYS_MAX_I2C_BUS          4
  54 #define CONFIG_SYS_I2C_SPEED            100000
  55 #define CONFIG_CMD_I2C
  56
  57 /* SD/MMC */
  58 #define CONFIG_MMC
  59 #define CONFIG_GENERIC_MMC
  60 #define CONFIG_TEGRA_MMC
  61 #define CONFIG_CMD_MMC
  62
  63 #define CONFIG_DOS_PARTITION
  64 #define CONFIG_EFI_PARTITION
  65 #define CONFIG_CMD_EXT2
  66 #define CONFIG_CMD_FAT
  67
  68 /*
  69  * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
  70  * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If
  71  * they didn't, the boot sector layout may be different. However, use of that
  72  * particular card is standard practice as far as I know.
  73  */
  74 #define CONFIG_ENV_IS_IN_MMC
  75 #define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
  76 #define CONFIG_SYS_MMC_ENV_DEV 0
  77 #define CONFIG_SYS_MMC_ENV_PART 2
  78
  79 /* USB Host support */
  80 #define CONFIG_USB_EHCI
  81 #define CONFIG_USB_EHCI_TEGRA
  82 #define CONFIG_USB_STORAGE
  83 #define CONFIG_CMD_USB
  84
  85 /* USB networking support */
  86 #define CONFIG_USB_HOST_ETHER
  87 #define CONFIG_USB_ETHER_ASIX
  88
  89 /* General networking support */
  90 #define CONFIG_CMD_NET
  91 #define CONFIG_CMD_DHCP
  92
  93 #include "tegra20-common-post.h"
  94
  95 #endif /* __CONFIG_H */