include/configs/x600.h

   1 /*
   2  * (C) Copyright 2009
   3  * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
   4  *
   5  * Copyright (C) 2012, 2015 Stefan Roese <sr@denx.de>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  * (easy to change)
  16  */
  17 #define CONFIG_SPEAR600                         /* SPEAr600 SoC */
  18 #define CONFIG_X600                             /* on X600 board */
  19
  20 #include <asm/arch/hardware.h>
  21
  22 /* Timer, HZ specific defines */
  23 #define CONFIG_SYS_HZ_CLOCK                     8300000
  24
  25 #define CONFIG_SYS_TEXT_BASE                    0x00800040
  26 #define CONFIG_SYS_FLASH_BASE                   0xf8000000
  27 /* Reserve 8KiB for SPL */
  28 #define CONFIG_SPL_PAD_TO                       8192    /* decimal for 'dd' */
  29 #define CONFIG_SYS_SPL_LEN                      CONFIG_SPL_PAD_TO
  30 #define CONFIG_SYS_UBOOT_BASE                   (CONFIG_SYS_FLASH_BASE + \
  31                                                  CONFIG_SYS_SPL_LEN)
  32 #define CONFIG_SYS_UBOOT_START                  CONFIG_SYS_TEXT_BASE
  33 #define CONFIG_SYS_MONITOR_BASE                 CONFIG_SYS_FLASH_BASE
  34 #define CONFIG_SYS_MONITOR_LEN                  0x60000
  35
  36 #define CONFIG_ENV_IS_IN_FLASH
  37
  38 /* Serial Configuration (PL011) */
  39 #define CONFIG_SYS_SERIAL0                      0xD0000000
  40 #define CONFIG_SYS_SERIAL1                      0xD0080000
  41 #define CONFIG_PL01x_PORTS                      { (void *)CONFIG_SYS_SERIAL0, \
  42                                                 (void *)CONFIG_SYS_SERIAL1 }
  43 #define CONFIG_PL011_SERIAL
  44 #define CONFIG_PL011_CLOCK                      (48 * 1000 * 1000)
  45 #define CONFIG_CONS_INDEX                       0
  46 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, \
  47                                                   57600, 115200 }
  48 #define CONFIG_SYS_LOADS_BAUD_CHANGE
  49
  50 /* NOR FLASH config options */
  51 #define CONFIG_ST_SMI
  52 #define CONFIG_SYS_MAX_FLASH_BANKS              1
  53 #define CONFIG_SYS_FLASH_BANK_SIZE              0x01000000
  54 #define CONFIG_SYS_FLASH_ADDR_BASE              { CONFIG_SYS_FLASH_BASE }
  55 #define CONFIG_SYS_MAX_FLASH_SECT               128
  56 #define CONFIG_SYS_FLASH_EMPTY_INFO
  57 #define CONFIG_SYS_FLASH_ERASE_TOUT             (3 * CONFIG_SYS_HZ)
  58 #define CONFIG_SYS_FLASH_WRITE_TOUT             (3 * CONFIG_SYS_HZ)
  59
  60 /* NAND FLASH config options */
  61 #define CONFIG_NAND_FSMC
  62 #define CONFIG_SYS_NAND_SELF_INIT
  63 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  64 #define CONFIG_SYS_NAND_BASE                    CONFIG_FSMC_NAND_BASE
  65 #define CONFIG_MTD_ECC_SOFT
  66 #define CONFIG_SYS_FSMC_NAND_8BIT
  67 #define CONFIG_SYS_NAND_ONFI_DETECTION
  68 #define CONFIG_NAND_ECC_BCH
  69 #define CONFIG_BCH
  70
  71 /* UBI/UBI config options */
  72 #define CONFIG_MTD_DEVICE
  73 #define CONFIG_MTD_PARTITIONS
  74 #define CONFIG_RBTREE
  75
  76 /* Ethernet config options */
  77 #define CONFIG_MII
  78 #define CONFIG_PHY_RESET_DELAY                  10000           /* in usec */
  79 #define CONFIG_PHY_ADDR         0       /* PHY address */
  80 #define CONFIG_PHY_GIGE                 /* Include GbE speed/duplex detection */
  81 #define CONFIG_PHY_MICREL
  82 #define CONFIG_PHY_MICREL_KSZ9031
  83
  84 #define CONFIG_SPEAR_GPIO
  85
  86 /* I2C config options */
  87 #define CONFIG_SYS_I2C
  88 #define CONFIG_SYS_I2C_BASE                     0xD0200000
  89 #define CONFIG_SYS_I2C_SPEED                    400000
  90 #define CONFIG_SYS_I2C_SLAVE                    0x02
  91 #define CONFIG_I2C_CHIPADDRESS                  0x50
  92
  93 #define CONFIG_RTC_M41T62       1
  94 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
  95
  96 /* FPGA config options */
  97 #define CONFIG_FPGA
  98 #define CONFIG_FPGA_XILINX
  99 #define CONFIG_FPGA_SPARTAN3
 100 #define CONFIG_FPGA_COUNT       1
 101
 102 /* USB EHCI options */
 103 #define CONFIG_USB_EHCI
 104 #define CONFIG_USB_EHCI_SPEAR
 105 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 106
 107 /*
 108  * Command support defines
 109  */
 110 #define CONFIG_CMD_ENV
 111 #define CONFIG_CMD_FPGA_LOADMK
 112 #define CONFIG_CMD_MTDPARTS
 113 #define CONFIG_CMD_NAND
 114 #define CONFIG_CMD_SAVES
 115 #define CONFIG_CMD_UBIFS
 116 #define CONFIG_LZO
 117
 118 /* Filesystem support (for USB key) */
 119 #define CONFIG_SUPPORT_VFAT
 120
 121
 122 /*
 123  * U-Boot Environment placing definitions.
 124  */
 125 #define CONFIG_ENV_SECT_SIZE                    0x00010000
 126 #define CONFIG_ENV_ADDR                         (CONFIG_SYS_MONITOR_BASE + \
 127                                                  CONFIG_SYS_MONITOR_LEN)
 128 #define CONFIG_ENV_SIZE                         0x02000
 129 #define CONFIG_ENV_ADDR_REDUND                  (CONFIG_ENV_ADDR + \
 130                                                  CONFIG_ENV_SECT_SIZE)
 131 #define CONFIG_ENV_SIZE_REDUND                  (CONFIG_ENV_SIZE)
 132
 133 /* Miscellaneous configurable options */
 134 #define CONFIG_ARCH_CPU_INIT
 135 #define CONFIG_BOOT_PARAMS_ADDR                 0x00000100
 136 #define CONFIG_CMDLINE_TAG
 137 #define CONFIG_SETUP_MEMORY_TAGS
 138 #define CONFIG_MISC_INIT_R
 139 #define CONFIG_MX_CYCLIC                /* enable mdc/mwc commands      */
 140
 141 #define CONFIG_SYS_MEMTEST_START                0x00800000
 142 #define CONFIG_SYS_MEMTEST_END                  0x04000000
 143 #define CONFIG_SYS_MALLOC_LEN                   (8 << 20)
 144 #define CONFIG_SYS_LONGHELP
 145 #define CONFIG_CMDLINE_EDITING
 146 #define CONFIG_AUTO_COMPLETE
 147 #define CONFIG_SYS_CBSIZE                       256
 148 #define CONFIG_SYS_PBSIZE                       (CONFIG_SYS_CBSIZE + \
 149                                                  sizeof(CONFIG_SYS_PROMPT) + 16)
 150 #define CONFIG_SYS_MAXARGS                      16
 151 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
 152 #define CONFIG_SYS_LOAD_ADDR                    0x00800000
 153
 154 /* Use last 2 lwords in internal SRAM for bootcounter */
 155 #define CONFIG_BOOTCOUNT_LIMIT
 156 #define CONFIG_SYS_BOOTCOUNT_ADDR               (CONFIG_SRAM_BASE + \
 157                                                  CONFIG_SRAM_SIZE)
 158
 159 #define CONFIG_HOSTNAME                         x600
 160 #define CONFIG_UBI_PART                         ubi0
 161 #define CONFIG_UBIFS_VOLUME                     rootfs
 162
 163 #define MTDIDS_DEFAULT          "nand0=nand"
 164 #define MTDPARTS_DEFAULT        "mtdparts=nand:64M(ubi0),64M(ubi1)"
 165
 166 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 167         "u-boot_addr=1000000\0"                                         \
 168         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0"          \
 169         "load=tftp ${u-boot_addr} ${u-boot}\0"                          \
 170         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 171                 " +${filesize};"                                        \
 172                 "erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
 173                 "cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
 174                 " ${filesize};"                                         \
 175                 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 176                 " +${filesize}\0"                                       \
 177         "upd=run load update\0"                                         \
 178         "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"            \
 179         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
 180         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
 181         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
 182         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
 183                 " ${filesize}\0"                                        \
 184         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
 185         "init_ubifs=nand erase.part ubi0;ubi part ${part};"             \
 186                 "ubi create ${vol} 4000000\0"                           \
 187         "netdev=eth0\0"                                                 \
 188         "rootpath=/opt/eldk-4.2/arm\0"                                  \
 189         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 190                 "nfsroot=${serverip}:${rootpath}\0"                     \
 191         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 192         "boot_part=0\0"                                                 \
 193         "altbootcmd=if test $boot_part -eq 0;then "                     \
 194                         "echo Switching to partition 1!;"               \
 195                         "setenv boot_part 1;"                           \
 196                 "else; "                                                \
 197                         "echo Switching to partition 0!;"               \
 198                         "setenv boot_part 0;"                           \
 199                 "fi;"                                                   \
 200                 "saveenv;boot\0"                                        \
 201         "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} "               \
 202                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 203         "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"              \
 204         "kernel_fs=/boot/uImage \0"                                     \
 205         "kernel_addr=1000000\0"                                         \
 206         "dtb=" __stringify(CONFIG_HOSTNAME) "/"                         \
 207                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
 208         "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"           \
 209         "dtb_addr=1800000\0"                                            \
 210         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
 211         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
 212         "addip=setenv bootargs ${bootargs} "                            \
 213                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 214                 ":${hostname}:${netdev}:off panic=1\0"                  \
 215         "addcon=setenv bootargs ${bootargs} console=ttyAMA0,"           \
 216                 "${baudrate}\0"                                         \
 217         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 218         "net_nfs=run load_dtb load_kernel; "                            \
 219                 "run nfsargs addip addcon addmtd addmisc;"              \
 220                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 221         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 222         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 223         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
 224                 " addcon addmisc addmtd;"                               \
 225                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 226         "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0"  \
 227         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
 228                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
 229         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
 230                 "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0"   \
 231         "bootcmd=run nand_ubifs\0"                                      \
 232         "\0"
 233
 234 /* Physical Memory Map */
 235 #define CONFIG_NR_DRAM_BANKS                    1
 236 #define PHYS_SDRAM_1                            0x00000000
 237 #define PHYS_SDRAM_1_MAXSIZE                    0x40000000
 238
 239 #define CONFIG_SYS_SDRAM_BASE                   PHYS_SDRAM_1
 240 #define CONFIG_SRAM_BASE                        0xd2800000
 241 /* Preserve the last 2 lwords for the boot-counter */
 242 #define CONFIG_SRAM_SIZE                        ((8 << 10) - 0x8)
 243 #define CONFIG_SYS_INIT_RAM_ADDR                CONFIG_SRAM_BASE
 244 #define CONFIG_SYS_INIT_RAM_SIZE                CONFIG_SRAM_SIZE
 245
 246 #define CONFIG_SYS_INIT_SP_OFFSET               \
 247         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 248
 249 #define CONFIG_SYS_INIT_SP_ADDR                 \
 250         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 251
 252 /*
 253  * SPL related defines
 254  */
 255 #define CONFIG_SPL_TEXT_BASE            0xd2800b00
 256 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SRAM_SIZE - 0xb00)
 257 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
 258 #define CONFIG_SPL_LDSCRIPT     "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
 259
 260 #define CONFIG_SPL_FRAMEWORK
 261
 262 /*
 263  * Please select/define only one of the following
 264  * Each definition corresponds to a supported DDR chip.
 265  * DDR configuration is based on the following selection
 266  */
 267 #define CONFIG_DDR_MT47H64M16           1
 268 #define CONFIG_DDR_MT47H32M16           0
 269 #define CONFIG_DDR_MT47H128M8           0
 270
 271 /*
 272  * Synchronous/Asynchronous operation of DDR
 273  *
 274  * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
 275  * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
 276  * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
 277  */
 278 #define CONFIG_DDR_2HCLK                1
 279 #define CONFIG_DDR_HCLK                 0
 280 #define CONFIG_DDR_PLL2                 0
 281
 282 /*
 283  * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
 284  * or not. Modify/Add to only these macros to define new boot types
 285  */
 286 #define USB_BOOT_SUPPORTED              0
 287 #define PCIE_BOOT_SUPPORTED             0
 288 #define SNOR_BOOT_SUPPORTED             1
 289 #define NAND_BOOT_SUPPORTED             1
 290 #define PNOR_BOOT_SUPPORTED             0
 291 #define TFTP_BOOT_SUPPORTED             0
 292 #define UART_BOOT_SUPPORTED             0
 293 #define SPI_BOOT_SUPPORTED              0
 294 #define I2C_BOOT_SUPPORTED              0
 295 #define MMC_BOOT_SUPPORTED              0
 296
 297 #endif  /* __CONFIG_H */