include/configs/xilinx_zynqmp.h

   1 /*
   2  * Configuration for Xilinx ZynqMP
   3  * (C) Copyright 2014 - 2015 Xilinx, Inc.
   4  * Michal Simek <michal.simek@xilinx.com>
   5  *
   6  * Based on Configuration for Versatile Express
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __XILINX_ZYNQMP_H
  12 #define __XILINX_ZYNQMP_H
  13
  14 #define CONFIG_REMAKE_ELF
  15
  16 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
  17
  18 #define CONFIG_SYS_NO_FLASH
  19
  20 /* Generic Interrupt Controller Definitions */
  21 #define CONFIG_GICV2
  22 #define GICD_BASE       0xF9010000
  23 #define GICC_BASE       0xF9020000
  24
  25 #define CONFIG_SYS_ALT_MEMTEST
  26 #define CONFIG_SYS_MEMTEST_SCRATCH      0xfffc0000
  27
  28 #ifndef CONFIG_NR_DRAM_BANKS
  29 # define CONFIG_NR_DRAM_BANKS           2
  30 #endif
  31 #define CONFIG_SYS_MEMTEST_START        0
  32 #define CONFIG_SYS_MEMTEST_END          1000
  33
  34 /* Have release address at the end of 256MB for now */
  35 #define CPU_RELEASE_ADDR        0xFFFFFF0
  36
  37 /* Cache Definitions */
  38 #define CONFIG_SYS_CACHELINE_SIZE       64
  39
  40 #if !defined(CONFIG_IDENT_STRING)
  41 # define CONFIG_IDENT_STRING            " Xilinx ZynqMP"
  42 #endif
  43
  44 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_TEXT_BASE
  45
  46 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
  47 #if !defined(COUNTER_FREQUENCY)
  48 # define COUNTER_FREQUENCY              100000000
  49 #endif
  50
  51 /* Size of malloc() pool */
  52 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 0x2000000)
  53
  54 /* Serial setup */
  55 #define CONFIG_ARM_DCC
  56 #define CONFIG_CPU_ARMV8
  57 #define CONFIG_ZYNQ_SERIAL
  58
  59 #define CONFIG_CONS_INDEX               0
  60 #define CONFIG_BAUDRATE                 115200
  61 #define CONFIG_SYS_BAUDRATE_TABLE \
  62         { 4800, 9600, 19200, 38400, 57600, 115200 }
  63
  64 /* Command line configuration */
  65 #define CONFIG_CMD_ENV
  66 #define CONFIG_DOS_PARTITION
  67 #define CONFIG_EFI_PARTITION
  68 #define CONFIG_MP
  69
  70 /* BOOTP options */
  71 #define CONFIG_BOOTP_BOOTFILESIZE
  72 #define CONFIG_BOOTP_BOOTPATH
  73 #define CONFIG_BOOTP_GATEWAY
  74 #define CONFIG_BOOTP_HOSTNAME
  75 #define CONFIG_BOOTP_MAY_FAIL
  76 #define CONFIG_BOOTP_SERVERIP
  77
  78 /* SPI */
  79 #ifdef CONFIG_ZYNQ_SPI
  80 #endif
  81
  82 #if defined(CONFIG_ZYNQ_SDHCI)
  83 # define CONFIG_MMC
  84 # define CONFIG_GENERIC_MMC
  85 # define CONFIG_SDHCI
  86 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
  87 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ    200000000
  88 # endif
  89 #endif
  90
  91 #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
  92 # define CONFIG_FAT_WRITE
  93 #endif
  94
  95 #ifdef CONFIG_NAND_ARASAN
  96 # define CONFIG_CMD_NAND
  97 # define CONFIG_CMD_NAND_LOCK_UNLOCK
  98 # define CONFIG_SYS_MAX_NAND_DEVICE     1
  99 # define CONFIG_SYS_NAND_SELF_INIT
 100 # define CONFIG_SYS_NAND_ONFI_DETECTION
 101 # define CONFIG_MTD_DEVICE
 102 #endif
 103
 104 /* Miscellaneous configurable options */
 105 #define CONFIG_SYS_LOAD_ADDR            0x8000000
 106
 107 #if defined(CONFIG_ZYNQMP_USB)
 108 #define CONFIG_USB_XHCI_DWC3
 109 #define CONFIG_USB_XHCI
 110 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 111 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 112 #define CONFIG_USB_STORAGE
 113 #define CONFIG_USB_XHCI_ZYNQMP
 114
 115 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    0x1800000
 116 #define DFU_DEFAULT_POLL_TIMEOUT        300
 117 #define CONFIG_USB_FUNCTION_DFU
 118 #define CONFIG_DFU_RAM
 119 #define CONFIG_USB_CABLE_CHECK
 120 #define CONFIG_CMD_THOR_DOWNLOAD
 121 #define CONFIG_USB_FUNCTION_THOR
 122 #define CONFIG_THOR_RESET_OFF
 123 #define DFU_ALT_INFO_RAM \
 124         "dfu_ram_info=" \
 125         "setenv dfu_alt_info " \
 126         "Image ram $kernel_addr $kernel_size\\\\;" \
 127         "system.dtb ram $fdt_addr $fdt_size\0" \
 128         "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 129         "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 130
 131 #define DFU_ALT_INFO  \
 132                 DFU_ALT_INFO_RAM
 133 #endif
 134
 135 #if !defined(DFU_ALT_INFO)
 136 # define DFU_ALT_INFO
 137 #endif
 138
 139 /* Initial environment variables */
 140 #define CONFIG_EXTRA_ENV_SETTINGS \
 141         "kernel_addr=0x80000\0" \
 142         "fdt_addr=0x7000000\0" \
 143         "fdt_high=0x10000000\0" \
 144         CONFIG_KERNEL_FDT_OFST_SIZE \
 145         "sdbootdev=0\0"\
 146         "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
 147                 "load mmc $sdbootdev:$partid $kernel_addr Image && " \
 148                 "booti $kernel_addr - $fdt_addr\0" \
 149         DFU_ALT_INFO
 150
 151 #define CONFIG_PREBOOT          "run bootargs"
 152 #define CONFIG_BOOTCOMMAND      "run $modeboot"
 153 #define CONFIG_BOOTDELAY        3
 154
 155 #define CONFIG_BOARD_LATE_INIT
 156
 157 /* Do not preserve environment */
 158 #define CONFIG_ENV_IS_NOWHERE           1
 159 #define CONFIG_ENV_SIZE                 0x1000
 160
 161 /* Monitor Command Prompt */
 162 /* Console I/O Buffer Size */
 163 #define CONFIG_SYS_CBSIZE               2048
 164 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 165                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 166 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 167 #define CONFIG_SYS_LONGHELP
 168 #define CONFIG_CMDLINE_EDITING
 169 #define CONFIG_SYS_MAXARGS              64
 170
 171 /* Ethernet driver */
 172 #if defined(CONFIG_ZYNQ_GEM)
 173 # define CONFIG_NET_MULTI
 174 # define CONFIG_MII
 175 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 176 # define CONFIG_PHY_MARVELL
 177 # define CONFIG_PHY_NATSEMI
 178 # define CONFIG_PHY_TI
 179 # define CONFIG_PHY_GIGE
 180 # define PHY_ANEG_TIMEOUT       20000
 181 #endif
 182
 183 /* I2C */
 184 #if defined(CONFIG_SYS_I2C_ZYNQ)
 185 # define CONFIG_SYS_I2C
 186 # define CONFIG_SYS_I2C_ZYNQ_SPEED              100000
 187 # define CONFIG_SYS_I2C_ZYNQ_SLAVE              0
 188 #endif
 189
 190 /* EEPROM */
 191 #ifdef CONFIG_ZYNQMP_EEPROM
 192 # define CONFIG_CMD_EEPROM
 193 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
 194 # define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
 195 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 196 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 197 # define CONFIG_SYS_EEPROM_SIZE                 (64 * 1024)
 198 #endif
 199
 200 #ifdef CONFIG_AHCI
 201 #define CONFIG_LIBATA
 202 #define CONFIG_SCSI_AHCI
 203 #define CONFIG_SCSI_AHCI_PLAT
 204 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
 205 #define CONFIG_SYS_SCSI_MAX_LUN         1
 206 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 207                                          CONFIG_SYS_SCSI_MAX_LUN)
 208 #define CONFIG_CMD_SCSI
 209 #endif
 210
 211 #define CONFIG_SYS_BOOTM_LEN    (60 * 1024 * 1024)
 212
 213 #define CONFIG_CMD_BOOTI
 214 #define CONFIG_CMD_UNZIP
 215
 216 #define CONFIG_BOARD_EARLY_INIT_R
 217 #define CONFIG_CLOCKS
 218
 219 #endif /* __XILINX_ZYNQMP_H */