include/configs/xilinx_zynqmp.h

   1 /*
   2  * Configuration for Xilinx ZynqMP
   3  * (C) Copyright 2014 - 2015 Xilinx, Inc.
   4  * Michal Simek <michal.simek@xilinx.com>
   5  *
   6  * Based on Configuration for Versatile Express
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __XILINX_ZYNQMP_H
  12 #define __XILINX_ZYNQMP_H
  13
  14 #define CONFIG_REMAKE_ELF
  15
  16 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
  17
  18 #define CONFIG_SYS_NO_FLASH
  19
  20
  21 /* Generic Interrupt Controller Definitions */
  22 #define CONFIG_GICV2
  23 #define GICD_BASE       0xF9010000
  24 #define GICC_BASE       0xF9020000
  25
  26 /* Physical Memory Map */
  27 #define CONFIG_NR_DRAM_BANKS            1
  28 #define CONFIG_SYS_SDRAM_BASE           0
  29 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  30
  31 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  32 #define CONFIG_SYS_MEMTEST_END          CONFIG_SYS_SDRAM_SIZE
  33
  34 /* Have release address at the end of 256MB for now */
  35 #define CPU_RELEASE_ADDR        0xFFFFFF0
  36
  37 /* Cache Definitions */
  38 #define CONFIG_SYS_CACHELINE_SIZE       64
  39
  40 #define CONFIG_IDENT_STRING             " Xilinx ZynqMP"
  41
  42 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  43
  44 /* Flat Device Tree Definitions */
  45 #define CONFIG_OF_LIBFDT
  46
  47 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
  48 #define COUNTER_FREQUENCY               4000000
  49
  50 /* Size of malloc() pool */
  51 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 0x2000000)
  52
  53 /* Serial setup */
  54 #if defined(CONFIG_ZYNQMP_DCC)
  55 # define CONFIG_ARM_DCC
  56 # define CONFIG_CPU_ARMV8
  57 #else
  58 # define CONFIG_ZYNQ_SERIAL
  59 #endif
  60
  61 #define CONFIG_CONS_INDEX               0
  62 #define CONFIG_BAUDRATE                 115200
  63 #define CONFIG_SYS_BAUDRATE_TABLE \
  64         { 4800, 9600, 19200, 38400, 57600, 115200 }
  65
  66 /* Command line configuration */
  67 #define CONFIG_CMD_ENV
  68 #define CONFIG_CMD_EXT2
  69 #define CONFIG_CMD_EXT4
  70 #define CONFIG_CMD_FAT
  71 #define CONFIG_CMD_FS_GENERIC
  72 #define CONFIG_DOS_PARTITION
  73 #define CONFIG_MP
  74
  75 #define CONFIG_CMD_MII
  76
  77 /* BOOTP options */
  78 #define CONFIG_BOOTP_BOOTFILESIZE
  79 #define CONFIG_BOOTP_BOOTPATH
  80 #define CONFIG_BOOTP_GATEWAY
  81 #define CONFIG_BOOTP_HOSTNAME
  82 #define CONFIG_BOOTP_MAY_FAIL
  83 #define CONFIG_BOOTP_SERVERIP
  84
  85 /* SPI */
  86 #ifdef CONFIG_ZYNQ_SPI
  87 # define CONFIG_CMD_SF
  88 #endif
  89
  90 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
  91 # define CONFIG_MMC
  92 # define CONFIG_GENERIC_MMC
  93 # define CONFIG_SDHCI
  94 # define CONFIG_ZYNQ_SDHCI
  95 # define CONFIG_CMD_MMC
  96 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
  97 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ    200000000
  98 # endif
  99 #endif
 100
 101 #if defined(CONFIG_ZYNQ_SDHCI)
 102 # define CONFIG_FAT_WRITE
 103 # define CONFIG_CMD_EXT4_WRITE
 104 #endif
 105
 106 /* Miscellaneous configurable options */
 107 #define CONFIG_SYS_LOAD_ADDR            0x8000000
 108
 109 #if defined(CONFIG_ZYNQMP_USB)
 110 #define CONFIG_USB_XHCI_DWC3
 111 #define CONFIG_USB_XHCI
 112 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 113 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 114 #define CONFIG_CMD_USB
 115 #define CONFIG_USB_STORAGE
 116 #define CONFIG_USB_XHCI_ZYNQMP
 117
 118 #define CONFIG_USB_DWC3
 119 #define CONFIG_USB_DWC3_GADGET
 120
 121 #define CONFIG_USB_GADGET
 122 #define CONFIG_USB_GADGET_DOWNLOAD
 123 #define CONFIG_USB_GADGET_DUALSPEED
 124 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 125 #define CONFIG_USBDOWNLOAD_GADGET
 126 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    0x1800000
 127 #define DFU_DEFAULT_POLL_TIMEOUT        300
 128 #define CONFIG_USB_FUNCTION_DFU
 129 #define CONFIG_DFU_RAM
 130 #define CONFIG_G_DNL_VENDOR_NUM         0x03FD
 131 #define CONFIG_G_DNL_PRODUCT_NUM        0x0300
 132 #define CONFIG_G_DNL_MANUFACTURER       "Xilinx"
 133 #define CONFIG_USB_CABLE_CHECK
 134 #define CONFIG_CMD_DFU
 135 #define CONFIG_CMD_THOR_DOWNLOAD
 136 #define CONFIG_USB_FUNCTION_THOR
 137 #define CONFIG_THOR_RESET_OFF
 138 #define DFU_ALT_INFO_RAM \
 139         "dfu_ram_info=" \
 140         "set dfu_alt_info " \
 141         "Image ram 0x200000 0x1800000\\\\;" \
 142         "system.dtb ram 0x7000000 0x40000\0" \
 143         "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 144         "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 145
 146 #define DFU_ALT_INFO  \
 147                 DFU_ALT_INFO_RAM
 148 #endif
 149
 150 #if !defined(DFU_ALT_INFO)
 151 # define DFU_ALT_INFO
 152 #endif
 153
 154 /* Initial environment variables */
 155 #define CONFIG_EXTRA_ENV_SETTINGS \
 156         "kernel_addr=0x80000\0" \
 157         "fdt_addr=0x7000000\0" \
 158         "fdt_high=0x10000000\0" \
 159         "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
 160                 "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \
 161         DFU_ALT_INFO
 162
 163 #define CONFIG_BOOTARGS         "setenv bootargs console=ttyPS0,${baudrate} " \
 164                                 "earlycon=cdns,mmio,0xff000000,${baudrate}n8"
 165 #define CONFIG_PREBOOT          "run bootargs"
 166 #define CONFIG_BOOTCOMMAND      "run $modeboot"
 167 #define CONFIG_BOOTDELAY        5
 168
 169 #define CONFIG_BOARD_LATE_INIT
 170
 171 /* Do not preserve environment */
 172 #define CONFIG_ENV_IS_NOWHERE           1
 173 #define CONFIG_ENV_SIZE                 0x1000
 174
 175 /* Monitor Command Prompt */
 176 /* Console I/O Buffer Size */
 177 #define CONFIG_SYS_CBSIZE               2048
 178 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 179                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 180 #define CONFIG_SYS_HUSH_PARSER
 181 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 182 #define CONFIG_SYS_LONGHELP
 183 #define CONFIG_CMDLINE_EDITING
 184 #define CONFIG_SYS_MAXARGS              64
 185
 186 /* Ethernet driver */
 187 #if defined(CONFIG_ZYNQ_GEM)
 188 # define CONFIG_NET_MULTI
 189 # define CONFIG_MII
 190 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 191 # define CONFIG_PHY_MARVELL
 192 # define CONFIG_PHY_TI
 193 #endif
 194
 195 /* I2C */
 196 #if defined(CONFIG_SYS_I2C_ZYNQ)
 197 # define CONFIG_CMD_I2C
 198 # define CONFIG_SYS_I2C
 199 # define CONFIG_SYS_I2C_ZYNQ_SPEED              100000
 200 # define CONFIG_SYS_I2C_ZYNQ_SLAVE              0
 201 #endif
 202
 203 /* EEPROM */
 204 #ifdef CONFIG_ZYNQMP_EEPROM
 205 # define CONFIG_CMD_EEPROM
 206 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
 207 # define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
 208 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 209 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 210 # define CONFIG_SYS_EEPROM_SIZE                 (64 * 1024)
 211 #endif
 212
 213 #ifdef CONFIG_AHCI
 214 #define CONFIG_LIBATA
 215 #define CONFIG_SCSI_AHCI
 216 #define CONFIG_SCSI_AHCI_PLAT
 217 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 218 #define CONFIG_SYS_SCSI_MAX_LUN         1
 219 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 220                                          CONFIG_SYS_SCSI_MAX_LUN)
 221 #define CONFIG_CMD_SCSI
 222 #endif
 223
 224 #define CONFIG_SYS_BOOTM_LEN    (60 * 1024 * 1024)
 225
 226 #define CONFIG_CMD_BOOTI
 227 #define CONFIG_CMD_UNZIP
 228
 229 #define CONFIG_BOARD_EARLY_INIT_R
 230 #define CONFIG_CLOCKS
 231
 232 #endif /* __XILINX_ZYNQMP_H */