include/configs/xilinx_zynqmp.h

   1 /*
   2  * Configuration for Xilinx ZynqMP
   3  * (C) Copyright 2014 - 2015 Xilinx, Inc.
   4  * Michal Simek <michal.simek@xilinx.com>
   5  *
   6  * Based on Configuration for Versatile Express
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __XILINX_ZYNQMP_H
  12 #define __XILINX_ZYNQMP_H
  13
  14 #define CONFIG_REMAKE_ELF
  15
  16 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
  17
  18 #define CONFIG_SYS_NO_FLASH
  19
  20
  21 /* Generic Interrupt Controller Definitions */
  22 #define CONFIG_GICV2
  23 #define GICD_BASE       0xF9010000
  24 #define GICC_BASE       0xF9020000
  25
  26 /* Physical Memory Map */
  27 #define CONFIG_NR_DRAM_BANKS            1
  28 #define CONFIG_SYS_SDRAM_BASE           0
  29 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  30
  31 #define CONFIG_SYS_ALT_MEMTEST
  32 #define CONFIG_SYS_MEMTEST_SCRATCH      0xfffc0000
  33
  34 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  35 #define CONFIG_SYS_MEMTEST_END          CONFIG_SYS_SDRAM_SIZE
  36
  37 /* Have release address at the end of 256MB for now */
  38 #define CPU_RELEASE_ADDR        0xFFFFFF0
  39
  40 /* Cache Definitions */
  41 #define CONFIG_SYS_CACHELINE_SIZE       64
  42
  43 #define CONFIG_IDENT_STRING             " Xilinx ZynqMP"
  44
  45 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  46
  47 /* Flat Device Tree Definitions */
  48 #define CONFIG_OF_LIBFDT
  49
  50 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
  51 #define COUNTER_FREQUENCY               4000000
  52
  53 /* Size of malloc() pool */
  54 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 0x2000000)
  55
  56 /* Serial setup */
  57 #if defined(CONFIG_ZYNQMP_DCC)
  58 # define CONFIG_ARM_DCC
  59 # define CONFIG_CPU_ARMV8
  60 #else
  61 # define CONFIG_ZYNQ_SERIAL
  62 #endif
  63
  64 #define CONFIG_CONS_INDEX               0
  65 #define CONFIG_BAUDRATE                 115200
  66 #define CONFIG_SYS_BAUDRATE_TABLE \
  67         { 4800, 9600, 19200, 38400, 57600, 115200 }
  68
  69 /* Command line configuration */
  70 #define CONFIG_CMD_ENV
  71 #define CONFIG_CMD_EXT2
  72 #define CONFIG_CMD_EXT4
  73 #define CONFIG_CMD_FAT
  74 #define CONFIG_CMD_FS_GENERIC
  75 #define CONFIG_DOS_PARTITION
  76 #define CONFIG_MP
  77
  78 #define CONFIG_CMD_MII
  79
  80 /* BOOTP options */
  81 #define CONFIG_BOOTP_BOOTFILESIZE
  82 #define CONFIG_BOOTP_BOOTPATH
  83 #define CONFIG_BOOTP_GATEWAY
  84 #define CONFIG_BOOTP_HOSTNAME
  85 #define CONFIG_BOOTP_MAY_FAIL
  86 #define CONFIG_BOOTP_SERVERIP
  87
  88 /* SPI */
  89 #ifdef CONFIG_ZYNQ_SPI
  90 # define CONFIG_CMD_SF
  91 #endif
  92
  93 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
  94 # define CONFIG_MMC
  95 # define CONFIG_GENERIC_MMC
  96 # define CONFIG_SDHCI
  97 # define CONFIG_ZYNQ_SDHCI
  98 # define CONFIG_CMD_MMC
  99 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
 100 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ    200000000
 101 # endif
 102 #endif
 103
 104 #if defined(CONFIG_ZYNQ_SDHCI)
 105 # define CONFIG_FAT_WRITE
 106 # define CONFIG_CMD_EXT4_WRITE
 107 #endif
 108
 109 /* Miscellaneous configurable options */
 110 #define CONFIG_SYS_LOAD_ADDR            0x8000000
 111
 112 #if defined(CONFIG_ZYNQMP_USB)
 113 #define CONFIG_USB_XHCI_DWC3
 114 #define CONFIG_USB_XHCI
 115 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
 116 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 117 #define CONFIG_CMD_USB
 118 #define CONFIG_USB_STORAGE
 119 #define CONFIG_USB_XHCI_ZYNQMP
 120
 121 #define CONFIG_USB_DWC3
 122 #define CONFIG_USB_DWC3_GADGET
 123
 124 #define CONFIG_USB_GADGET
 125 #define CONFIG_USB_GADGET_DOWNLOAD
 126 #define CONFIG_USB_GADGET_DUALSPEED
 127 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 128 #define CONFIG_USBDOWNLOAD_GADGET
 129 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    0x1800000
 130 #define DFU_DEFAULT_POLL_TIMEOUT        300
 131 #define CONFIG_USB_FUNCTION_DFU
 132 #define CONFIG_DFU_RAM
 133 #define CONFIG_G_DNL_VENDOR_NUM         0x03FD
 134 #define CONFIG_G_DNL_PRODUCT_NUM        0x0300
 135 #define CONFIG_G_DNL_MANUFACTURER       "Xilinx"
 136 #define CONFIG_USB_CABLE_CHECK
 137 #define CONFIG_CMD_DFU
 138 #define CONFIG_CMD_THOR_DOWNLOAD
 139 #define CONFIG_USB_FUNCTION_THOR
 140 #define CONFIG_THOR_RESET_OFF
 141 #define DFU_ALT_INFO_RAM \
 142         "dfu_ram_info=" \
 143         "set dfu_alt_info " \
 144         "Image ram 0x200000 0x1800000\\\\;" \
 145         "system.dtb ram 0x7000000 0x40000\0" \
 146         "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 147         "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 148
 149 #define DFU_ALT_INFO  \
 150                 DFU_ALT_INFO_RAM
 151 #endif
 152
 153 #if !defined(DFU_ALT_INFO)
 154 # define DFU_ALT_INFO
 155 #endif
 156
 157 /* Initial environment variables */
 158 #define CONFIG_EXTRA_ENV_SETTINGS \
 159         "kernel_addr=0x80000\0" \
 160         "fdt_addr=0x7000000\0" \
 161         "fdt_high=0x10000000\0" \
 162         "sdbootdev=0\0"\
 163         "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
 164                 "load mmc $sdbootdev:$partid $kernel_addr Image && " \
 165                 "booti $kernel_addr - $fdt_addr\0" \
 166         DFU_ALT_INFO
 167
 168 #define CONFIG_BOOTARGS         "setenv bootargs console=ttyPS0,${baudrate} " \
 169                                 "earlycon=cdns,mmio,0xff000000,${baudrate}n8"
 170 #define CONFIG_PREBOOT          "run bootargs"
 171 #define CONFIG_BOOTCOMMAND      "run $modeboot"
 172 #define CONFIG_BOOTDELAY        5
 173
 174 #define CONFIG_BOARD_LATE_INIT
 175
 176 /* Do not preserve environment */
 177 #define CONFIG_ENV_IS_NOWHERE           1
 178 #define CONFIG_ENV_SIZE                 0x1000
 179
 180 /* Monitor Command Prompt */
 181 /* Console I/O Buffer Size */
 182 #define CONFIG_SYS_CBSIZE               2048
 183 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 184                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 185 #define CONFIG_SYS_HUSH_PARSER
 186 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 187 #define CONFIG_SYS_LONGHELP
 188 #define CONFIG_CMDLINE_EDITING
 189 #define CONFIG_SYS_MAXARGS              64
 190
 191 /* Ethernet driver */
 192 #if defined(CONFIG_ZYNQ_GEM)
 193 # define CONFIG_NET_MULTI
 194 # define CONFIG_MII
 195 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 196 # define CONFIG_PHY_MARVELL
 197 # define CONFIG_PHY_TI
 198 #endif
 199
 200 /* I2C */
 201 #if defined(CONFIG_SYS_I2C_ZYNQ)
 202 # define CONFIG_CMD_I2C
 203 # define CONFIG_SYS_I2C
 204 # define CONFIG_SYS_I2C_ZYNQ_SPEED              100000
 205 # define CONFIG_SYS_I2C_ZYNQ_SLAVE              0
 206 #endif
 207
 208 /* EEPROM */
 209 #ifdef CONFIG_ZYNQMP_EEPROM
 210 # define CONFIG_CMD_EEPROM
 211 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
 212 # define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
 213 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 214 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 215 # define CONFIG_SYS_EEPROM_SIZE                 (64 * 1024)
 216 #endif
 217
 218 #ifdef CONFIG_AHCI
 219 #define CONFIG_LIBATA
 220 #define CONFIG_SCSI_AHCI
 221 #define CONFIG_SCSI_AHCI_PLAT
 222 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
 223 #define CONFIG_SYS_SCSI_MAX_LUN         1
 224 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 225                                          CONFIG_SYS_SCSI_MAX_LUN)
 226 #define CONFIG_CMD_SCSI
 227 #endif
 228
 229 #define CONFIG_SYS_BOOTM_LEN    (60 * 1024 * 1024)
 230
 231 #define CONFIG_CMD_BOOTI
 232 #define CONFIG_CMD_UNZIP
 233
 234 #define CONFIG_BOARD_EARLY_INIT_R
 235 #define CONFIG_CLOCKS
 236
 237 #endif /* __XILINX_ZYNQMP_H */