include/configs/zmx25.h

   1 /*
   2  * (c) 2011 Graf-Syteco, Matthias Weisser
   3  * <weisserm@arcor.de>
   4  *
   5  * Configuation settings for the zmx25 board
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <asm/arch/imx-regs.h>
  14
  15 #define CONFIG_SYS_TEXT_BASE            0xA0000000
  16
  17 #define CONFIG_SYS_TIMER_RATE           32768
  18 #define CONFIG_SYS_TIMER_COUNTER        \
  19         (&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
  20
  21 #define CONFIG_MACH_TYPE        MACH_TYPE_ZMX25
  22 /*
  23  * Environment settings
  24  */
  25 #define CONFIG_EXTRA_ENV_SETTINGS \
  26         "gs_fast_boot=setenv bootdelay 5\0" \
  27         "gs_slow_boot=setenv bootdelay 10\0" \
  28         "bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
  29                 "fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
  30                 "bootm 0x81000000; bootelf 0x81000000\0"
  31
  32 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs      */
  33 #define CONFIG_SETUP_MEMORY_TAGS
  34 #define CONFIG_INITRD_TAG
  35
  36 /*
  37  * Hardware drivers
  38  */
  39
  40 /*
  41  * GPIO
  42  */
  43 #define CONFIG_MXC_GPIO
  44
  45 /*
  46  * Serial
  47  */
  48 #define CONFIG_MXC_UART
  49 #define CONFIG_MXC_UART_BASE    UART2_BASE
  50 #define CONFIG_CONS_INDEX       1       /* use UART2 for console */
  51
  52 /*
  53  * Ethernet
  54  */
  55 #define CONFIG_FEC_MXC
  56 #define CONFIG_FEC_MXC_PHYADDR          0x00
  57 #define CONFIG_MII
  58
  59 /*
  60  * BOOTP options
  61  */
  62 #define CONFIG_BOOTP_BOOTFILESIZE
  63 #define CONFIG_BOOTP_BOOTPATH
  64 #define CONFIG_BOOTP_GATEWAY
  65 #define CONFIG_BOOTP_HOSTNAME
  66
  67 /*
  68  * Command line configuration.
  69  */
  70
  71 /*
  72  * Additional command
  73  */
  74
  75 /*
  76  * USB
  77  */
  78 #ifdef CONFIG_CMD_USB
  79 #define CONFIG_USB_EHCI_MXC
  80 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  81 #define CONFIG_MXC_USB_PORT     1
  82 #define CONFIG_MXC_USB_PORTSC   MXC_EHCI_MODE_SERIAL
  83 #define CONFIG_MXC_USB_FLAGS    (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
  84 #define CONFIG_EHCI_IS_TDI
  85 #define CONFIG_SUPPORT_VFAT
  86 #endif /* CONFIG_CMD_USB */
  87
  88 /* SDRAM */
  89 #define CONFIG_NR_DRAM_BANKS    1
  90 #define PHYS_SDRAM              0x80000000      /* start address of LPDDRRAM */
  91 #define PHYS_SDRAM_SIZE         0x04000000      /* 64 megs */
  92
  93 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM
  94 #define CONFIG_SYS_INIT_SP_ADDR 0x78020000      /* end of internal SRAM */
  95
  96 /*
  97  * FLASH and environment organization
  98  */
  99 #define CONFIG_SYS_FLASH_BASE           0xA0000000
 100 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 101 #define CONFIG_SYS_MAX_FLASH_SECT       256
 102
 103 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x00040000)
 104 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 105 #define CONFIG_ENV_SIZE                 (128 * 1024)
 106
 107 /*
 108  * CFI FLASH driver setup
 109  */
 110 #define CONFIG_SYS_FLASH_CFI
 111 #define CONFIG_FLASH_CFI_DRIVER
 112 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* ~10x faster */
 113
 114 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_SDRAM_BASE
 115
 116 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM + (512*1024))
 117 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM + PHYS_SDRAM_SIZE)
 118
 119 #define CONFIG_SYS_LONGHELP
 120 #define CONFIG_CMDLINE_EDITING
 121
 122 #define CONFIG_PREBOOT  ""
 123
 124
 125 /*
 126  * Size of malloc() pool
 127  */
 128 #define CONFIG_SYS_MALLOC_LEN           (0x400000 - 0x8000)
 129
 130 #endif  /* __CONFIG_H */