include/configs/zynq-common.h

   1 /*
   2  * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
   3  * (C) Copyright 2013 Xilinx, Inc.
   4  *
   5  * Common configuration options for all Zynq boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_ZYNQ_COMMON_H
  11 #define __CONFIG_ZYNQ_COMMON_H
  12
  13 /* CPU clock */
  14 #ifndef CONFIG_CPU_FREQ_HZ
  15 # define CONFIG_CPU_FREQ_HZ     800000000
  16 #endif
  17
  18 /* Cache options */
  19 #define CONFIG_CMD_CACHE
  20 #define CONFIG_SYS_CACHELINE_SIZE       32
  21
  22 #define CONFIG_SYS_L2CACHE_OFF
  23 #ifndef CONFIG_SYS_L2CACHE_OFF
  24 # define CONFIG_SYS_L2_PL310
  25 # define CONFIG_SYS_PL310_BASE          0xf8f02000
  26 #endif
  27
  28 #define ZYNQ_SCUTIMER_BASEADDR          0xF8F00600
  29 #define CONFIG_SYS_TIMERBASE            ZYNQ_SCUTIMER_BASEADDR
  30 #define CONFIG_SYS_TIMER_COUNTS_DOWN
  31 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMERBASE + 0x4)
  32
  33 /* Serial drivers */
  34 #define CONFIG_BAUDRATE         115200
  35 /* The following table includes the supported baudrates */
  36 #define CONFIG_SYS_BAUDRATE_TABLE  \
  37         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
  38
  39 /* DCC driver */
  40 #if defined(CONFIG_ZYNQ_DCC)
  41 # define CONFIG_ARM_DCC
  42 #else
  43 # define CONFIG_ZYNQ_SERIAL
  44 #endif
  45
  46 #define CONFIG_ZYNQ_GPIO
  47 #define CONFIG_CMD_GPIO
  48
  49 /* Ethernet driver */
  50 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
  51 # define CONFIG_ZYNQ_GEM
  52 # define CONFIG_MII
  53 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  54 # define CONFIG_PHYLIB
  55 # define CONFIG_PHY_MARVELL
  56 # define CONFIG_BOOTP_SERVERIP
  57 # define CONFIG_BOOTP_BOOTPATH
  58 # define CONFIG_BOOTP_GATEWAY
  59 # define CONFIG_BOOTP_HOSTNAME
  60 # define CONFIG_BOOTP_MAY_FAIL
  61 # if !defined(CONFIG_ZYNQ_GEM_EMIO0)
  62 #  define CONFIG_ZYNQ_GEM_EMIO0 0
  63 # endif
  64 # if !defined(CONFIG_ZYNQ_GEM_EMIO1)
  65 #  define CONFIG_ZYNQ_GEM_EMIO1 0
  66 # endif
  67 #endif
  68
  69 /* SPI */
  70 #ifdef CONFIG_ZYNQ_SPI
  71 # define CONFIG_SPI_FLASH_SST
  72 # define CONFIG_CMD_SF
  73 #endif
  74
  75 /* QSPI */
  76 #ifdef CONFIG_ZYNQ_QSPI
  77 # define CONFIG_SF_DEFAULT_SPEED        30000000
  78 # define CONFIG_SPI_FLASH_ISSI
  79 # define CONFIG_SPI_FLASH_SPANSION
  80 # define CONFIG_SPI_FLASH_STMICRO
  81 # define CONFIG_SPI_FLASH_WINBOND
  82 # define CONFIG_SPI_FLASH_BAR
  83 # define CONFIG_CMD_SF
  84 #endif
  85
  86 /* NOR */
  87 #ifndef CONFIG_SYS_NO_FLASH
  88 # define CONFIG_SYS_FLASH_BASE          0xE2000000
  89 # define CONFIG_SYS_FLASH_SIZE          (16 * 1024 * 1024)
  90 # define CONFIG_SYS_MAX_FLASH_BANKS     1
  91 # define CONFIG_SYS_MAX_FLASH_SECT      512
  92 # define CONFIG_SYS_FLASH_ERASE_TOUT    1000
  93 # define CONFIG_SYS_FLASH_WRITE_TOUT    5000
  94 # define CONFIG_FLASH_SHOW_PROGRESS     10
  95 # define CONFIG_SYS_FLASH_CFI
  96 # undef CONFIG_SYS_FLASH_EMPTY_INFO
  97 # define CONFIG_FLASH_CFI_DRIVER
  98 # undef CONFIG_SYS_FLASH_PROTECTION
  99 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 100 #endif
 101
 102 /* MMC */
 103 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
 104 # define CONFIG_MMC
 105 # define CONFIG_GENERIC_MMC
 106 # define CONFIG_SDHCI
 107 # define CONFIG_ZYNQ_SDHCI
 108 # define CONFIG_CMD_MMC
 109 #endif
 110
 111 #ifdef CONFIG_ZYNQ_USB
 112 # define CONFIG_USB_EHCI
 113 # define CONFIG_CMD_USB
 114 # define CONFIG_USB_STORAGE
 115 # define CONFIG_USB_EHCI_ZYNQ
 116 # define CONFIG_USB_ULPI_VIEWPORT
 117 # define CONFIG_USB_ULPI
 118 # define CONFIG_EHCI_IS_TDI
 119 # define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 120
 121 # define CONFIG_CI_UDC           /* ChipIdea CI13xxx UDC */
 122 # define CONFIG_USB_GADGET
 123 # define CONFIG_USB_GADGET_DUALSPEED
 124 # define CONFIG_USB_GADGET_DOWNLOAD
 125 # define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x600000
 126 # define DFU_DEFAULT_POLL_TIMEOUT       300
 127 # define CONFIG_USB_FUNCTION_DFU
 128 # define CONFIG_DFU_RAM
 129 # define CONFIG_USB_GADGET_VBUS_DRAW    2
 130 # define CONFIG_G_DNL_VENDOR_NUM        0x03FD
 131 # define CONFIG_G_DNL_PRODUCT_NUM       0x0300
 132 # define CONFIG_G_DNL_MANUFACTURER      "Xilinx"
 133 # define CONFIG_USB_GADGET
 134 # define CONFIG_USB_CABLE_CHECK
 135 # define CONFIG_CMD_DFU
 136 # define CONFIG_CMD_THOR_DOWNLOAD
 137 # define CONFIG_USB_FUNCTION_THOR
 138 # define DFU_ALT_INFO_RAM \
 139         "dfu_ram_info=" \
 140         "set dfu_alt_info " \
 141         "${kernel_image} ram 0x3000000 0x500000\\\\;" \
 142         "${devicetree_image} ram 0x2A00000 0x20000\\\\;" \
 143         "${ramdisk_image} ram 0x2000000 0x600000\0" \
 144         "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 145         "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 146
 147 # if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
 148 #  define CONFIG_DFU_MMC
 149 #  define DFU_ALT_INFO_MMC \
 150         "dfu_mmc_info=" \
 151         "set dfu_alt_info " \
 152         "${kernel_image} fat 0 1\\\\;" \
 153         "${devicetree_image} fat 0 1\\\\;" \
 154         "${ramdisk_image} fat 0 1\0" \
 155         "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
 156         "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"
 157
 158 #  define DFU_ALT_INFO  \
 159         DFU_ALT_INFO_RAM \
 160         DFU_ALT_INFO_MMC
 161 # else
 162 #  define DFU_ALT_INFO  \
 163         DFU_ALT_INFO_RAM
 164 # endif
 165 #endif
 166
 167 #if !defined(DFU_ALT_INFO)
 168 # define DFU_ALT_INFO
 169 #endif
 170
 171 #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
 172 # define CONFIG_SUPPORT_VFAT
 173 # define CONFIG_CMD_FAT
 174 # define CONFIG_CMD_EXT2
 175 # define CONFIG_FAT_WRITE
 176 # define CONFIG_DOS_PARTITION
 177 # define CONFIG_CMD_EXT4
 178 # define CONFIG_CMD_EXT4_WRITE
 179 # define CONFIG_CMD_FS_GENERIC
 180 #endif
 181
 182 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
 183 #define CONFIG_SYS_I2C_ZYNQ
 184 #endif
 185
 186 /* I2C */
 187 #if defined(CONFIG_SYS_I2C_ZYNQ)
 188 # define CONFIG_CMD_I2C
 189 # define CONFIG_SYS_I2C
 190 # define CONFIG_SYS_I2C_ZYNQ_SPEED              100000
 191 # define CONFIG_SYS_I2C_ZYNQ_SLAVE              0
 192 #endif
 193
 194 /* EEPROM */
 195 #ifdef CONFIG_ZYNQ_EEPROM
 196 # define CONFIG_CMD_EEPROM
 197 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
 198 # define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
 199 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 200 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 201 # define CONFIG_SYS_EEPROM_SIZE                 1024 /* Bytes */
 202 #endif
 203
 204 /* Total Size of Environment Sector */
 205 #define CONFIG_ENV_SIZE                 (128 << 10)
 206
 207 /* Allow to overwrite serial and ethaddr */
 208 #define CONFIG_ENV_OVERWRITE
 209
 210 /* Environment */
 211 #ifndef CONFIG_ENV_IS_NOWHERE
 212 # ifndef CONFIG_SYS_NO_FLASH
 213 #  define CONFIG_ENV_IS_IN_FLASH
 214 # elif defined(CONFIG_SYS_NO_FLASH)
 215 #  define CONFIG_ENV_IS_NOWHERE
 216 # endif
 217
 218 # define CONFIG_ENV_SECT_SIZE           CONFIG_ENV_SIZE
 219 # define CONFIG_ENV_OFFSET              0xE0000
 220 #endif
 221
 222 /* Default environment */
 223 #define CONFIG_EXTRA_ENV_SETTINGS       \
 224         "fit_image=fit.itb\0"           \
 225         "load_addr=0x2000000\0"         \
 226         "fit_size=0x800000\0"           \
 227         "flash_off=0x100000\0"          \
 228         "nor_flash_off=0xE2100000\0"    \
 229         "fdt_high=0x20000000\0"         \
 230         "initrd_high=0x20000000\0"      \
 231         "norboot=echo Copying FIT from NOR flash to RAM... && " \
 232                 "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
 233                 "bootm ${load_addr}\0" \
 234         "sdboot=echo Copying FIT from SD to RAM... && " \
 235                 "load mmc 0 ${load_addr} ${fit_image} && " \
 236                 "bootm ${load_addr}\0" \
 237         "jtagboot=echo TFTPing FIT to RAM... && " \
 238                 "tftpboot ${load_addr} ${fit_image} && " \
 239                 "bootm ${load_addr}\0" \
 240         "usbboot=if usb start; then " \
 241                         "echo Copying FIT from USB to RAM... && " \
 242                         "load usb 0 ${load_addr} ${fit_image} && " \
 243                         "bootm ${load_addr}\0" \
 244                 "fi\0" \
 245                 DFU_ALT_INFO
 246
 247 #define CONFIG_BOOTCOMMAND              "run $modeboot"
 248 #define CONFIG_BOOTDELAY                3 /* -1 to Disable autoboot */
 249 #define CONFIG_SYS_LOAD_ADDR            0 /* default? */
 250
 251 /* Miscellaneous configurable options */
 252 #define CONFIG_SYS_HUSH_PARSER
 253
 254 #define CONFIG_CMDLINE_EDITING
 255 #define CONFIG_AUTO_COMPLETE
 256 #define CONFIG_BOARD_LATE_INIT
 257 #define CONFIG_DISPLAY_BOARDINFO
 258 #define CONFIG_SYS_LONGHELP
 259 #define CONFIG_CLOCKS
 260 #define CONFIG_CMD_CLK
 261 #define CONFIG_SYS_MAXARGS              32 /* max number of command args */
 262 #define CONFIG_SYS_CBSIZE               256 /* Console I/O Buffer Size */
 263 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 264                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 265
 266 /* Physical Memory map */
 267 #define CONFIG_SYS_TEXT_BASE            0x4000000
 268
 269 #define CONFIG_NR_DRAM_BANKS            1
 270 #define CONFIG_SYS_SDRAM_BASE           0
 271
 272 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 273 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x1000)
 274
 275 #define CONFIG_SYS_MALLOC_LEN           0x1400000
 276 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_SDRAM_BASE
 277 #define CONFIG_SYS_INIT_RAM_SIZE        CONFIG_SYS_MALLOC_LEN
 278 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 279                                         CONFIG_SYS_INIT_RAM_SIZE - \
 280                                         GENERATED_GBL_DATA_SIZE)
 281
 282 /* Enable the PL to be downloaded */
 283 #define CONFIG_FPGA
 284 #define CONFIG_FPGA_XILINX
 285 #define CONFIG_FPGA_ZYNQPL
 286 #define CONFIG_CMD_FPGA_LOADMK
 287 #define CONFIG_CMD_FPGA_LOADP
 288 #define CONFIG_CMD_FPGA_LOADBP
 289 #define CONFIG_CMD_FPGA_LOADFS
 290
 291 /* Open Firmware flat tree */
 292 #define CONFIG_OF_LIBFDT
 293
 294 /* FIT support */
 295 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 296
 297 /* FDT support */
 298 #define CONFIG_DISPLAY_BOARDINFO_LATE
 299
 300 /* Extend size of kernel image for uncompression */
 301 #define CONFIG_SYS_BOOTM_LEN    (60 * 1024 * 1024)
 302
 303 /* Boot FreeBSD/vxWorks from an ELF image */
 304 #if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
 305 # define CONFIG_API
 306 # define CONFIG_SYS_MMC_MAX_DEVICE      1
 307 #endif
 308
 309 #define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"
 310
 311 /* Commands */
 312 #define CONFIG_CMD_PING
 313 #define CONFIG_CMD_DHCP
 314 #define CONFIG_CMD_MII
 315 #define CONFIG_CMD_TFTPPUT
 316
 317 /* SPL part */
 318 #define CONFIG_CMD_SPL
 319 #define CONFIG_SPL_FRAMEWORK
 320 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 321 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 322 #define CONFIG_SPL_SERIAL_SUPPORT
 323 #define CONFIG_SPL_BOARD_INIT
 324
 325 #define CONFIG_SPL_LDSCRIPT     "arch/arm/mach-zynq/u-boot-spl.lds"
 326
 327 /* MMC support */
 328 #ifdef CONFIG_ZYNQ_SDHCI0
 329 #define CONFIG_SPL_MMC_SUPPORT
 330 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 331 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 332 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 333 #define CONFIG_SPL_LIBDISK_SUPPORT
 334 #define CONFIG_SPL_FAT_SUPPORT
 335 #ifdef CONFIG_OF_CONTROL
 336 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
 337 #else
 338 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 339 #endif
 340 #endif
 341
 342 /* Disable dcache for SPL just for sure */
 343 #ifdef CONFIG_SPL_BUILD
 344 #define CONFIG_SYS_DCACHE_OFF
 345 #undef CONFIG_FPGA
 346 #endif
 347
 348 /* Address in RAM where the parameters must be copied by SPL. */
 349 #define CONFIG_SYS_SPL_ARGS_ADDR        0x10000000
 350
 351 #define CONFIG_SPL_FS_LOAD_ARGS_NAME            "system.dtb"
 352 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME          "uImage"
 353
 354 /* Not using MMC raw mode - just for compilation purpose */
 355 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0
 356 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  0
 357 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0
 358
 359 /* qspi mode is working fine */
 360 #ifdef CONFIG_ZYNQ_QSPI
 361 #define CONFIG_SPL_SPI_SUPPORT
 362 #define CONFIG_SPL_SPI_LOAD
 363 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 364 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x100000
 365 #define CONFIG_SYS_SPI_ARGS_OFFS        0x200000
 366 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
 367 #define CONFIG_SYS_SPI_KERNEL_OFFS      (CONFIG_SYS_SPI_ARGS_OFFS + \
 368                                         CONFIG_SYS_SPI_ARGS_SIZE)
 369 #endif
 370
 371 /* for booting directly linux */
 372 #define CONFIG_SPL_OS_BOOT
 373
 374 /* SP location before relocation, must use scratch RAM */
 375 #define CONFIG_SPL_TEXT_BASE    0x0
 376
 377 /* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
 378 #define CONFIG_SPL_MAX_SIZE     0x30000
 379
 380 /* The highest 64k OCM address */
 381 #define OCM_HIGH_ADDR   0xffff0000
 382
 383 /* Just define any reasonable size */
 384 #define CONFIG_SPL_STACK_SIZE   0x1000
 385
 386 /* SPL stack position - and stack goes down */
 387 #define CONFIG_SPL_STACK        (OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE)
 388
 389 /* On the top of OCM space */
 390 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_STACK + \
 391                                          GENERATED_GBL_DATA_SIZE)
 392 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x1000
 393
 394 /* BSS setup */
 395 #define CONFIG_SPL_BSS_START_ADDR       0x100000
 396 #define CONFIG_SPL_BSS_MAX_SIZE         0x100000
 397
 398 #define CONFIG_SYS_UBOOT_START  CONFIG_SYS_TEXT_BASE
 399
 400
 401 #endif /* __CONFIG_ZYNQ_COMMON_H */