include/configs/zynq-common.h

   1 /*
   2  * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
   3  * (C) Copyright 2013 Xilinx, Inc.
   4  *
   5  * Common configuration options for all Zynq boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_ZYNQ_COMMON_H
  11 #define __CONFIG_ZYNQ_COMMON_H
  12
  13 /* CPU clock */
  14 #ifndef CONFIG_CPU_FREQ_HZ
  15 # define CONFIG_CPU_FREQ_HZ     800000000
  16 #endif
  17
  18 /* Cache options */
  19 #define CONFIG_CMD_CACHE
  20 #define CONFIG_SYS_CACHELINE_SIZE       32
  21
  22 #define CONFIG_SYS_L2CACHE_OFF
  23 #ifndef CONFIG_SYS_L2CACHE_OFF
  24 # define CONFIG_SYS_L2_PL310
  25 # define CONFIG_SYS_PL310_BASE          0xf8f02000
  26 #endif
  27
  28 #define ZYNQ_SCUTIMER_BASEADDR          0xF8F00600
  29 #define CONFIG_SYS_TIMERBASE            ZYNQ_SCUTIMER_BASEADDR
  30 #define CONFIG_SYS_TIMER_COUNTS_DOWN
  31 #define CONFIG_SYS_TIMER_COUNTER        (CONFIG_SYS_TIMERBASE + 0x4)
  32
  33 /* Serial drivers */
  34 #define CONFIG_BAUDRATE         115200
  35 /* The following table includes the supported baudrates */
  36 #define CONFIG_SYS_BAUDRATE_TABLE  \
  37         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
  38
  39 /* DCC driver */
  40 #if defined(CONFIG_ZYNQ_DCC)
  41 # define CONFIG_ARM_DCC
  42 #else
  43 # define CONFIG_ZYNQ_SERIAL
  44 #endif
  45
  46 #define CONFIG_ZYNQ_GPIO
  47
  48 /* Ethernet driver */
  49 #if defined(CONFIG_ZYNQ_GEM)
  50 # define CONFIG_MII
  51 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  52 # define CONFIG_PHY_MARVELL
  53 # define CONFIG_BOOTP_SERVERIP
  54 # define CONFIG_BOOTP_BOOTPATH
  55 # define CONFIG_BOOTP_GATEWAY
  56 # define CONFIG_BOOTP_HOSTNAME
  57 # define CONFIG_BOOTP_MAY_FAIL
  58 #endif
  59
  60 /* SPI */
  61 #ifdef CONFIG_ZYNQ_SPI
  62 # define CONFIG_CMD_SF
  63 #endif
  64
  65 /* QSPI */
  66 #ifdef CONFIG_ZYNQ_QSPI
  67 # define CONFIG_SF_DEFAULT_SPEED        30000000
  68 # define CONFIG_SPI_FLASH_ISSI
  69 # define CONFIG_CMD_SF
  70 #endif
  71
  72 /* NOR */
  73 #ifndef CONFIG_SYS_NO_FLASH
  74 # define CONFIG_SYS_FLASH_BASE          0xE2000000
  75 # define CONFIG_SYS_FLASH_SIZE          (16 * 1024 * 1024)
  76 # define CONFIG_SYS_MAX_FLASH_BANKS     1
  77 # define CONFIG_SYS_MAX_FLASH_SECT      512
  78 # define CONFIG_SYS_FLASH_ERASE_TOUT    1000
  79 # define CONFIG_SYS_FLASH_WRITE_TOUT    5000
  80 # define CONFIG_FLASH_SHOW_PROGRESS     10
  81 # define CONFIG_SYS_FLASH_CFI
  82 # undef CONFIG_SYS_FLASH_EMPTY_INFO
  83 # define CONFIG_FLASH_CFI_DRIVER
  84 # undef CONFIG_SYS_FLASH_PROTECTION
  85 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  86 #endif
  87
  88 /* MMC */
  89 #if defined(CONFIG_ZYNQ_SDHCI)
  90 # define CONFIG_MMC
  91 # define CONFIG_GENERIC_MMC
  92 # define CONFIG_SDHCI
  93 # define CONFIG_CMD_MMC
  94 # define CONFIG_ZYNQ_SDHCI_MAX_FREQ     52000000
  95 #endif
  96
  97 #ifdef CONFIG_ZYNQ_USB
  98 # define CONFIG_USB_EHCI
  99 # define CONFIG_CMD_USB
 100 # define CONFIG_USB_STORAGE
 101 # define CONFIG_USB_EHCI_ZYNQ
 102 # define CONFIG_USB_ULPI_VIEWPORT
 103 # define CONFIG_USB_ULPI
 104 # define CONFIG_EHCI_IS_TDI
 105 # define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 106
 107 # define CONFIG_CI_UDC           /* ChipIdea CI13xxx UDC */
 108 # define CONFIG_USB_GADGET
 109 # define CONFIG_USB_GADGET_DUALSPEED
 110 # define CONFIG_USB_GADGET_DOWNLOAD
 111 # define CONFIG_SYS_DFU_DATA_BUF_SIZE   0x600000
 112 # define DFU_DEFAULT_POLL_TIMEOUT       300
 113 # define CONFIG_USB_FUNCTION_DFU
 114 # define CONFIG_DFU_RAM
 115 # define CONFIG_USB_GADGET_VBUS_DRAW    2
 116 # define CONFIG_G_DNL_VENDOR_NUM        0x03FD
 117 # define CONFIG_G_DNL_PRODUCT_NUM       0x0300
 118 # define CONFIG_G_DNL_MANUFACTURER      "Xilinx"
 119 # define CONFIG_USB_GADGET
 120 # define CONFIG_USB_CABLE_CHECK
 121 # define CONFIG_CMD_DFU
 122 # define CONFIG_CMD_THOR_DOWNLOAD
 123 # define CONFIG_USB_FUNCTION_THOR
 124 # define DFU_ALT_INFO_RAM \
 125         "dfu_ram_info=" \
 126         "set dfu_alt_info " \
 127         "${kernel_image} ram 0x3000000 0x500000\\\\;" \
 128         "${devicetree_image} ram 0x2A00000 0x20000\\\\;" \
 129         "${ramdisk_image} ram 0x2000000 0x600000\0" \
 130         "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 131         "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 132
 133 # if defined(CONFIG_ZYNQ_SDHCI)
 134 #  define CONFIG_DFU_MMC
 135 #  define DFU_ALT_INFO_MMC \
 136         "dfu_mmc_info=" \
 137         "set dfu_alt_info " \
 138         "${kernel_image} fat 0 1\\\\;" \
 139         "${devicetree_image} fat 0 1\\\\;" \
 140         "${ramdisk_image} fat 0 1\0" \
 141         "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
 142         "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"
 143
 144 #  define DFU_ALT_INFO  \
 145         DFU_ALT_INFO_RAM \
 146         DFU_ALT_INFO_MMC
 147 # else
 148 #  define DFU_ALT_INFO  \
 149         DFU_ALT_INFO_RAM
 150 # endif
 151 #endif
 152
 153 #if !defined(DFU_ALT_INFO)
 154 # define DFU_ALT_INFO
 155 #endif
 156
 157 #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
 158 # define CONFIG_SUPPORT_VFAT
 159 # define CONFIG_CMD_FAT
 160 # define CONFIG_CMD_EXT2
 161 # define CONFIG_FAT_WRITE
 162 # define CONFIG_DOS_PARTITION
 163 # define CONFIG_CMD_EXT4
 164 # define CONFIG_CMD_EXT4_WRITE
 165 # define CONFIG_CMD_FS_GENERIC
 166 #endif
 167
 168 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
 169 #define CONFIG_SYS_I2C_ZYNQ
 170 #endif
 171
 172 /* I2C */
 173 #if defined(CONFIG_SYS_I2C_ZYNQ)
 174 # define CONFIG_CMD_I2C
 175 # define CONFIG_SYS_I2C
 176 # define CONFIG_SYS_I2C_ZYNQ_SPEED              100000
 177 # define CONFIG_SYS_I2C_ZYNQ_SLAVE              0
 178 #endif
 179
 180 /* EEPROM */
 181 #ifdef CONFIG_ZYNQ_EEPROM
 182 # define CONFIG_CMD_EEPROM
 183 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
 184 # define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
 185 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 186 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 187 # define CONFIG_SYS_EEPROM_SIZE                 1024 /* Bytes */
 188 #endif
 189
 190 /* Total Size of Environment Sector */
 191 #define CONFIG_ENV_SIZE                 (128 << 10)
 192
 193 /* Allow to overwrite serial and ethaddr */
 194 #define CONFIG_ENV_OVERWRITE
 195
 196 /* Environment */
 197 #ifndef CONFIG_ENV_IS_NOWHERE
 198 # ifndef CONFIG_SYS_NO_FLASH
 199 #  define CONFIG_ENV_IS_IN_FLASH
 200 # elif defined(CONFIG_SYS_NO_FLASH)
 201 #  define CONFIG_ENV_IS_NOWHERE
 202 # endif
 203
 204 # define CONFIG_ENV_SECT_SIZE           CONFIG_ENV_SIZE
 205 # define CONFIG_ENV_OFFSET              0xE0000
 206 #endif
 207
 208 /* Default environment */
 209 #define CONFIG_EXTRA_ENV_SETTINGS       \
 210         "fit_image=fit.itb\0"           \
 211         "load_addr=0x2000000\0"         \
 212         "fit_size=0x800000\0"           \
 213         "flash_off=0x100000\0"          \
 214         "nor_flash_off=0xE2100000\0"    \
 215         "fdt_high=0x20000000\0"         \
 216         "initrd_high=0x20000000\0"      \
 217         "norboot=echo Copying FIT from NOR flash to RAM... && " \
 218                 "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
 219                 "bootm ${load_addr}\0" \
 220         "sdboot=echo Copying FIT from SD to RAM... && " \
 221                 "load mmc 0 ${load_addr} ${fit_image} && " \
 222                 "bootm ${load_addr}\0" \
 223         "jtagboot=echo TFTPing FIT to RAM... && " \
 224                 "tftpboot ${load_addr} ${fit_image} && " \
 225                 "bootm ${load_addr}\0" \
 226         "usbboot=if usb start; then " \
 227                         "echo Copying FIT from USB to RAM... && " \
 228                         "load usb 0 ${load_addr} ${fit_image} && " \
 229                         "bootm ${load_addr}\0" \
 230                 "fi\0" \
 231                 DFU_ALT_INFO
 232
 233 #define CONFIG_BOOTCOMMAND              "run $modeboot"
 234 #define CONFIG_BOOTDELAY                3 /* -1 to Disable autoboot */
 235 #define CONFIG_SYS_LOAD_ADDR            0 /* default? */
 236
 237 /* Miscellaneous configurable options */
 238 #define CONFIG_SYS_HUSH_PARSER
 239
 240 #define CONFIG_CMDLINE_EDITING
 241 #define CONFIG_AUTO_COMPLETE
 242 #define CONFIG_BOARD_LATE_INIT
 243 #define CONFIG_DISPLAY_BOARDINFO
 244 #define CONFIG_SYS_LONGHELP
 245 #define CONFIG_CLOCKS
 246 #define CONFIG_CMD_CLK
 247 #define CONFIG_SYS_MAXARGS              32 /* max number of command args */
 248 #define CONFIG_SYS_CBSIZE               256 /* Console I/O Buffer Size */
 249 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 250                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 251
 252 /* Physical Memory map */
 253 #define CONFIG_SYS_TEXT_BASE            0x4000000
 254
 255 #define CONFIG_NR_DRAM_BANKS            1
 256 #define CONFIG_SYS_SDRAM_BASE           0
 257
 258 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 259 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x1000)
 260
 261 #define CONFIG_SYS_MALLOC_LEN           0x1400000
 262 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_SDRAM_BASE
 263 #define CONFIG_SYS_INIT_RAM_SIZE        CONFIG_SYS_MALLOC_LEN
 264 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 265                                         CONFIG_SYS_INIT_RAM_SIZE - \
 266                                         GENERATED_GBL_DATA_SIZE)
 267
 268 /* Enable the PL to be downloaded */
 269 #define CONFIG_FPGA
 270 #define CONFIG_FPGA_XILINX
 271 #define CONFIG_FPGA_ZYNQPL
 272 #define CONFIG_CMD_FPGA_LOADMK
 273 #define CONFIG_CMD_FPGA_LOADP
 274 #define CONFIG_CMD_FPGA_LOADBP
 275 #define CONFIG_CMD_FPGA_LOADFS
 276
 277 /* Open Firmware flat tree */
 278 #define CONFIG_OF_LIBFDT
 279
 280 /* FIT support */
 281 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 282
 283 /* FDT support */
 284 #define CONFIG_DISPLAY_BOARDINFO_LATE
 285
 286 /* Extend size of kernel image for uncompression */
 287 #define CONFIG_SYS_BOOTM_LEN    (60 * 1024 * 1024)
 288
 289 /* Boot FreeBSD/vxWorks from an ELF image */
 290 #define CONFIG_SYS_MMC_MAX_DEVICE       1
 291
 292 #define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"
 293
 294 /* Commands */
 295 #define CONFIG_CMD_PING
 296 #define CONFIG_CMD_DHCP
 297 #define CONFIG_CMD_MII
 298 #define CONFIG_CMD_TFTPPUT
 299
 300 /* SPL part */
 301 #define CONFIG_CMD_SPL
 302 #define CONFIG_SPL_FRAMEWORK
 303 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 304 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 305 #define CONFIG_SPL_SERIAL_SUPPORT
 306 #define CONFIG_SPL_BOARD_INIT
 307
 308 #define CONFIG_SPL_LDSCRIPT     "arch/arm/mach-zynq/u-boot-spl.lds"
 309
 310 /* MMC support */
 311 #ifdef CONFIG_ZYNQ_SDHCI
 312 #define CONFIG_SPL_MMC_SUPPORT
 313 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 314 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 315 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 316 #define CONFIG_SPL_LIBDISK_SUPPORT
 317 #define CONFIG_SPL_FAT_SUPPORT
 318 #ifdef CONFIG_OF_SEPARATE
 319 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
 320 #else
 321 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 322 #endif
 323 #endif
 324
 325 /* Disable dcache for SPL just for sure */
 326 #ifdef CONFIG_SPL_BUILD
 327 #define CONFIG_SYS_DCACHE_OFF
 328 #undef CONFIG_FPGA
 329 #endif
 330
 331 /* Address in RAM where the parameters must be copied by SPL. */
 332 #define CONFIG_SYS_SPL_ARGS_ADDR        0x10000000
 333
 334 #define CONFIG_SPL_FS_LOAD_ARGS_NAME            "system.dtb"
 335 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME          "uImage"
 336
 337 /* Not using MMC raw mode - just for compilation purpose */
 338 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0
 339 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  0
 340 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0
 341
 342 /* qspi mode is working fine */
 343 #ifdef CONFIG_ZYNQ_QSPI
 344 #define CONFIG_SPL_SPI_SUPPORT
 345 #define CONFIG_SPL_SPI_LOAD
 346 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 347 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x100000
 348 #define CONFIG_SYS_SPI_ARGS_OFFS        0x200000
 349 #define CONFIG_SYS_SPI_ARGS_SIZE        0x80000
 350 #define CONFIG_SYS_SPI_KERNEL_OFFS      (CONFIG_SYS_SPI_ARGS_OFFS + \
 351                                         CONFIG_SYS_SPI_ARGS_SIZE)
 352 #endif
 353
 354 /* for booting directly linux */
 355 #define CONFIG_SPL_OS_BOOT
 356
 357 /* SP location before relocation, must use scratch RAM */
 358 #define CONFIG_SPL_TEXT_BASE    0x0
 359
 360 /* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
 361 #define CONFIG_SPL_MAX_SIZE     0x30000
 362
 363 /* The highest 64k OCM address */
 364 #define OCM_HIGH_ADDR   0xffff0000
 365
 366 /* On the top of OCM space */
 367 #define CONFIG_SYS_SPL_MALLOC_START     OCM_HIGH_ADDR
 368 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x2000
 369
 370 /*
 371  * SPL stack position - and stack goes down
 372  * 0xfffffe00 is used for putting wfi loop.
 373  * Set it up as limit for now.
 374  */
 375 #define CONFIG_SPL_STACK        0xfffffe00
 376
 377 /* BSS setup */
 378 #define CONFIG_SPL_BSS_START_ADDR       0x100000
 379 #define CONFIG_SPL_BSS_MAX_SIZE         0x100000
 380
 381 #define CONFIG_SYS_UBOOT_START  CONFIG_SYS_TEXT_BASE
 382
 383
 384 #endif /* __CONFIG_ZYNQ_COMMON_H */