include/i2c.h

   1 /*
   2  * (C) Copyright 2001
   3  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  *
  23  * The original I2C interface was
  24  *   (C) 2000 by Paolo Scaffardi (arsenio@tin.it)
  25  *   AIRVENT SAM s.p.a - RIMINI(ITALY)
  26  * but has been changed substantially.
  27  */
  28
  29 #ifndef _I2C_H_
  30 #define _I2C_H_
  31
  32 /*
  33  * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
  34  *
  35  * The implementation MUST NOT use static or global variables if the
  36  * I2C routines are used to read SDRAM configuration information
  37  * because this is done before the memories are initialized. Limited
  38  * use of stack-based variables are OK (the initial stack size is
  39  * limited).
  40  *
  41  * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
  42  */
  43
  44 /*
  45  * Configuration items.
  46  */
  47 #define I2C_RXTX_LEN    128     /* maximum tx/rx buffer length */
  48
  49 /*
  50  * Initialization, must be called once on start up, may be called
  51  * repeatedly to change the speed and slave addresses.
  52  */
  53 void i2c_init(int speed, int slaveaddr);
  54
  55 /*
  56  * Probe the given I2C chip address.  Returns 0 if a chip responded,
  57  * not 0 on failure.
  58  */
  59 int i2c_probe(uchar chip);
  60
  61 /*
  62  * Read/Write interface:
  63  *   chip:    I2C chip address, range 0..127
  64  *   addr:    Memory (register) address within the chip
  65  *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
  66  *              memories, 0 for register type devices with only one
  67  *              register)
  68  *   buffer:  Where to read/write the data
  69  *   len:     How many bytes to read/write
  70  *
  71  *   Returns: 0 on success, not 0 on failure
  72  */
  73 int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
  74 int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
  75
  76 /*
  77  * Utility routines to read/write registers.
  78  */
  79 uchar i2c_reg_read (uchar chip, uchar reg);
  80 void  i2c_reg_write(uchar chip, uchar reg, uchar val);
  81
  82 #endif  /* _I2C_H_ */