include/mmc.h

   1 /*
   2  * Copyright 2008,2010 Freescale Semiconductor, Inc
   3  * Andy Fleming
   4  *
   5  * Based (loosely) on the Linux code
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef _MMC_H_
  11 #define _MMC_H_
  12
  13 #include <linux/list.h>
  14 #include <linux/compiler.h>
  15 #include <part.h>
  16
  17 /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */
  18 #define SD_VERSION_SD   (1U << 31)
  19 #define MMC_VERSION_MMC (1U << 30)
  20
  21 #define MAKE_SDMMC_VERSION(a, b, c)     \
  22         ((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c))
  23 #define MAKE_SD_VERSION(a, b, c)        \
  24         (SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c))
  25 #define MAKE_MMC_VERSION(a, b, c)       \
  26         (MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c))
  27
  28 #define EXTRACT_SDMMC_MAJOR_VERSION(x)  \
  29         (((u32)(x) >> 16) & 0xff)
  30 #define EXTRACT_SDMMC_MINOR_VERSION(x)  \
  31         (((u32)(x) >> 8) & 0xff)
  32 #define EXTRACT_SDMMC_CHANGE_VERSION(x) \
  33         ((u32)(x) & 0xff)
  34
  35 #define SD_VERSION_3            MAKE_SD_VERSION(3, 0, 0)
  36 #define SD_VERSION_2            MAKE_SD_VERSION(2, 0, 0)
  37 #define SD_VERSION_1_0          MAKE_SD_VERSION(1, 0, 0)
  38 #define SD_VERSION_1_10         MAKE_SD_VERSION(1, 10, 0)
  39
  40 #define MMC_VERSION_UNKNOWN     MAKE_MMC_VERSION(0, 0, 0)
  41 #define MMC_VERSION_1_2         MAKE_MMC_VERSION(1, 2, 0)
  42 #define MMC_VERSION_1_4         MAKE_MMC_VERSION(1, 4, 0)
  43 #define MMC_VERSION_2_2         MAKE_MMC_VERSION(2, 2, 0)
  44 #define MMC_VERSION_3           MAKE_MMC_VERSION(3, 0, 0)
  45 #define MMC_VERSION_4           MAKE_MMC_VERSION(4, 0, 0)
  46 #define MMC_VERSION_4_1         MAKE_MMC_VERSION(4, 1, 0)
  47 #define MMC_VERSION_4_2         MAKE_MMC_VERSION(4, 2, 0)
  48 #define MMC_VERSION_4_3         MAKE_MMC_VERSION(4, 3, 0)
  49 #define MMC_VERSION_4_41        MAKE_MMC_VERSION(4, 4, 1)
  50 #define MMC_VERSION_4_5         MAKE_MMC_VERSION(4, 5, 0)
  51 #define MMC_VERSION_5_0         MAKE_MMC_VERSION(5, 0, 0)
  52 #define MMC_VERSION_5_1         MAKE_MMC_VERSION(5, 1, 0)
  53
  54 #define MMC_MODE_HS             (1 << 0)
  55 #define MMC_MODE_HS_52MHz       (1 << 1)
  56 #define MMC_MODE_4BIT           (1 << 2)
  57 #define MMC_MODE_8BIT           (1 << 3)
  58 #define MMC_MODE_SPI            (1 << 4)
  59 #define MMC_MODE_DDR_52MHz      (1 << 5)
  60
  61 #define SD_DATA_4BIT    0x00040000
  62
  63 #define IS_SD(x)        ((x)->version & SD_VERSION_SD)
  64 #define IS_MMC(x)       ((x)->version & MMC_VERSION_MMC)
  65
  66 #define MMC_DATA_READ           1
  67 #define MMC_DATA_WRITE          2
  68
  69 #define MMC_CMD_GO_IDLE_STATE           0
  70 #define MMC_CMD_SEND_OP_COND            1
  71 #define MMC_CMD_ALL_SEND_CID            2
  72 #define MMC_CMD_SET_RELATIVE_ADDR       3
  73 #define MMC_CMD_SET_DSR                 4
  74 #define MMC_CMD_SWITCH                  6
  75 #define MMC_CMD_SELECT_CARD             7
  76 #define MMC_CMD_SEND_EXT_CSD            8
  77 #define MMC_CMD_SEND_CSD                9
  78 #define MMC_CMD_SEND_CID                10
  79 #define MMC_CMD_STOP_TRANSMISSION       12
  80 #define MMC_CMD_SEND_STATUS             13
  81 #define MMC_CMD_SET_BLOCKLEN            16
  82 #define MMC_CMD_READ_SINGLE_BLOCK       17
  83 #define MMC_CMD_READ_MULTIPLE_BLOCK     18
  84 #define MMC_CMD_SET_BLOCK_COUNT         23
  85 #define MMC_CMD_WRITE_SINGLE_BLOCK      24
  86 #define MMC_CMD_WRITE_MULTIPLE_BLOCK    25
  87 #define MMC_CMD_ERASE_GROUP_START       35
  88 #define MMC_CMD_ERASE_GROUP_END         36
  89 #define MMC_CMD_ERASE                   38
  90 #define MMC_CMD_APP_CMD                 55
  91 #define MMC_CMD_SPI_READ_OCR            58
  92 #define MMC_CMD_SPI_CRC_ON_OFF          59
  93 #define MMC_CMD_RES_MAN                 62
  94
  95 #define MMC_CMD62_ARG1                  0xefac62ec
  96 #define MMC_CMD62_ARG2                  0xcbaea7
  97
  98
  99 #define SD_CMD_SEND_RELATIVE_ADDR       3
 100 #define SD_CMD_SWITCH_FUNC              6
 101 #define SD_CMD_SEND_IF_COND             8
 102 #define SD_CMD_SWITCH_UHS18V            11
 103
 104 #define SD_CMD_APP_SET_BUS_WIDTH        6
 105 #define SD_CMD_ERASE_WR_BLK_START       32
 106 #define SD_CMD_ERASE_WR_BLK_END         33
 107 #define SD_CMD_APP_SEND_OP_COND         41
 108 #define SD_CMD_APP_SEND_SCR             51
 109
 110 /* SCR definitions in different words */
 111 #define SD_HIGHSPEED_BUSY       0x00020000
 112 #define SD_HIGHSPEED_SUPPORTED  0x00020000
 113
 114 #define OCR_BUSY                0x80000000
 115 #define OCR_HCS                 0x40000000
 116 #define OCR_VOLTAGE_MASK        0x007FFF80
 117 #define OCR_ACCESS_MODE         0x60000000
 118
 119 #define MMC_ERASE_ARG           0x00000000
 120 #define MMC_SECURE_ERASE_ARG    0x80000000
 121 #define MMC_TRIM_ARG            0x00000001
 122 #define MMC_DISCARD_ARG         0x00000003
 123 #define MMC_SECURE_TRIM1_ARG    0x80000001
 124 #define MMC_SECURE_TRIM2_ARG    0x80008000
 125
 126 #define MMC_STATUS_MASK         (~0x0206BF7F)
 127 #define MMC_STATUS_SWITCH_ERROR (1 << 7)
 128 #define MMC_STATUS_RDY_FOR_DATA (1 << 8)
 129 #define MMC_STATUS_CURR_STATE   (0xf << 9)
 130 #define MMC_STATUS_ERROR        (1 << 19)
 131
 132 #define MMC_STATE_PRG           (7 << 9)
 133
 134 #define MMC_VDD_165_195         0x00000080      /* VDD voltage 1.65 - 1.95 */
 135 #define MMC_VDD_20_21           0x00000100      /* VDD voltage 2.0 ~ 2.1 */
 136 #define MMC_VDD_21_22           0x00000200      /* VDD voltage 2.1 ~ 2.2 */
 137 #define MMC_VDD_22_23           0x00000400      /* VDD voltage 2.2 ~ 2.3 */
 138 #define MMC_VDD_23_24           0x00000800      /* VDD voltage 2.3 ~ 2.4 */
 139 #define MMC_VDD_24_25           0x00001000      /* VDD voltage 2.4 ~ 2.5 */
 140 #define MMC_VDD_25_26           0x00002000      /* VDD voltage 2.5 ~ 2.6 */
 141 #define MMC_VDD_26_27           0x00004000      /* VDD voltage 2.6 ~ 2.7 */
 142 #define MMC_VDD_27_28           0x00008000      /* VDD voltage 2.7 ~ 2.8 */
 143 #define MMC_VDD_28_29           0x00010000      /* VDD voltage 2.8 ~ 2.9 */
 144 #define MMC_VDD_29_30           0x00020000      /* VDD voltage 2.9 ~ 3.0 */
 145 #define MMC_VDD_30_31           0x00040000      /* VDD voltage 3.0 ~ 3.1 */
 146 #define MMC_VDD_31_32           0x00080000      /* VDD voltage 3.1 ~ 3.2 */
 147 #define MMC_VDD_32_33           0x00100000      /* VDD voltage 3.2 ~ 3.3 */
 148 #define MMC_VDD_33_34           0x00200000      /* VDD voltage 3.3 ~ 3.4 */
 149 #define MMC_VDD_34_35           0x00400000      /* VDD voltage 3.4 ~ 3.5 */
 150 #define MMC_VDD_35_36           0x00800000      /* VDD voltage 3.5 ~ 3.6 */
 151
 152 #define MMC_SWITCH_MODE_CMD_SET         0x00 /* Change the command set */
 153 #define MMC_SWITCH_MODE_SET_BITS        0x01 /* Set bits in EXT_CSD byte
 154                                                 addressed by index which are
 155                                                 1 in value field */
 156 #define MMC_SWITCH_MODE_CLEAR_BITS      0x02 /* Clear bits in EXT_CSD byte
 157                                                 addressed by index, which are
 158                                                 1 in value field */
 159 #define MMC_SWITCH_MODE_WRITE_BYTE      0x03 /* Set target byte to value */
 160
 161 #define SD_SWITCH_CHECK         0
 162 #define SD_SWITCH_SWITCH        1
 163
 164 /*
 165  * EXT_CSD fields
 166  */
 167 #define EXT_CSD_ENH_START_ADDR          136     /* R/W */
 168 #define EXT_CSD_ENH_SIZE_MULT           140     /* R/W */
 169 #define EXT_CSD_GP_SIZE_MULT            143     /* R/W */
 170 #define EXT_CSD_PARTITION_SETTING       155     /* R/W */
 171 #define EXT_CSD_PARTITIONS_ATTRIBUTE    156     /* R/W */
 172 #define EXT_CSD_MAX_ENH_SIZE_MULT       157     /* R */
 173 #define EXT_CSD_PARTITIONING_SUPPORT    160     /* RO */
 174 #define EXT_CSD_RST_N_FUNCTION          162     /* R/W */
 175 #define EXT_CSD_WR_REL_PARAM            166     /* R */
 176 #define EXT_CSD_WR_REL_SET              167     /* R/W */
 177 #define EXT_CSD_RPMB_MULT               168     /* RO */
 178 #define EXT_CSD_ERASE_GROUP_DEF         175     /* R/W */
 179 #define EXT_CSD_BOOT_BUS_WIDTH          177
 180 #define EXT_CSD_PART_CONF               179     /* R/W */
 181 #define EXT_CSD_BUS_WIDTH               183     /* R/W */
 182 #define EXT_CSD_HS_TIMING               185     /* R/W */
 183 #define EXT_CSD_REV                     192     /* RO */
 184 #define EXT_CSD_CARD_TYPE               196     /* RO */
 185 #define EXT_CSD_SEC_CNT                 212     /* RO, 4 bytes */
 186 #define EXT_CSD_HC_WP_GRP_SIZE          221     /* RO */
 187 #define EXT_CSD_HC_ERASE_GRP_SIZE       224     /* RO */
 188 #define EXT_CSD_BOOT_MULT               226     /* RO */
 189
 190 /*
 191  * EXT_CSD field definitions
 192  */
 193
 194 #define EXT_CSD_CMD_SET_NORMAL          (1 << 0)
 195 #define EXT_CSD_CMD_SET_SECURE          (1 << 1)
 196 #define EXT_CSD_CMD_SET_CPSECURE        (1 << 2)
 197
 198 #define EXT_CSD_CARD_TYPE_26    (1 << 0)        /* Card can run at 26MHz */
 199 #define EXT_CSD_CARD_TYPE_52    (1 << 1)        /* Card can run at 52MHz */
 200 #define EXT_CSD_CARD_TYPE_DDR_1_8V      (1 << 2)
 201 #define EXT_CSD_CARD_TYPE_DDR_1_2V      (1 << 3)
 202 #define EXT_CSD_CARD_TYPE_DDR_52        (EXT_CSD_CARD_TYPE_DDR_1_8V \
 203                                         | EXT_CSD_CARD_TYPE_DDR_1_2V)
 204
 205 #define EXT_CSD_BUS_WIDTH_1     0       /* Card is in 1 bit mode */
 206 #define EXT_CSD_BUS_WIDTH_4     1       /* Card is in 4 bit mode */
 207 #define EXT_CSD_BUS_WIDTH_8     2       /* Card is in 8 bit mode */
 208 #define EXT_CSD_DDR_BUS_WIDTH_4 5       /* Card is in 4 bit DDR mode */
 209 #define EXT_CSD_DDR_BUS_WIDTH_8 6       /* Card is in 8 bit DDR mode */
 210
 211 #define EXT_CSD_BOOT_ACK_ENABLE                 (1 << 6)
 212 #define EXT_CSD_BOOT_PARTITION_ENABLE           (1 << 3)
 213 #define EXT_CSD_PARTITION_ACCESS_ENABLE         (1 << 0)
 214 #define EXT_CSD_PARTITION_ACCESS_DISABLE        (0 << 0)
 215
 216 #define EXT_CSD_BOOT_ACK(x)             (x << 6)
 217 #define EXT_CSD_BOOT_PART_NUM(x)        (x << 3)
 218 #define EXT_CSD_PARTITION_ACCESS(x)     (x << 0)
 219
 220 #define EXT_CSD_BOOT_BUS_WIDTH_MODE(x)  (x << 3)
 221 #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
 222 #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
 223
 224 #define EXT_CSD_PARTITION_SETTING_COMPLETED     (1 << 0)
 225
 226 #define EXT_CSD_ENH_USR         (1 << 0)        /* user data area is enhanced */
 227 #define EXT_CSD_ENH_GP(x)       (1 << ((x)+1))  /* GP part (x+1) is enhanced */
 228
 229 #define EXT_CSD_HS_CTRL_REL     (1 << 0)        /* host controlled WR_REL_SET */
 230
 231 #define EXT_CSD_WR_DATA_REL_USR         (1 << 0)        /* user data area WR_REL */
 232 #define EXT_CSD_WR_DATA_REL_GP(x)       (1 << ((x)+1))  /* GP part (x+1) WR_REL */
 233
 234 #define R1_ILLEGAL_COMMAND              (1 << 22)
 235 #define R1_APP_CMD                      (1 << 5)
 236
 237 #define MMC_RSP_PRESENT (1 << 0)
 238 #define MMC_RSP_136     (1 << 1)                /* 136 bit response */
 239 #define MMC_RSP_CRC     (1 << 2)                /* expect valid crc */
 240 #define MMC_RSP_BUSY    (1 << 3)                /* card may send busy */
 241 #define MMC_RSP_OPCODE  (1 << 4)                /* response contains opcode */
 242
 243 #define MMC_RSP_NONE    (0)
 244 #define MMC_RSP_R1      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 245 #define MMC_RSP_R1b     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
 246                         MMC_RSP_BUSY)
 247 #define MMC_RSP_R2      (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
 248 #define MMC_RSP_R3      (MMC_RSP_PRESENT)
 249 #define MMC_RSP_R4      (MMC_RSP_PRESENT)
 250 #define MMC_RSP_R5      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 251 #define MMC_RSP_R6      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 252 #define MMC_RSP_R7      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 253
 254 #define MMCPART_NOAVAILABLE     (0xff)
 255 #define PART_ACCESS_MASK        (0x7)
 256 #define PART_SUPPORT            (0x1)
 257 #define ENHNCD_SUPPORT          (0x2)
 258 #define PART_ENH_ATTRIB         (0x1f)
 259
 260 /* Maximum block size for MMC */
 261 #define MMC_MAX_BLOCK_LEN       512
 262
 263 /* The number of MMC physical partitions.  These consist of:
 264  * boot partitions (2), general purpose partitions (4) in MMC v4.4.
 265  */
 266 #define MMC_NUM_BOOT_PARTITION  2
 267 #define MMC_PART_RPMB           3       /* RPMB partition number */
 268
 269 /* Driver model support */
 270
 271 /**
 272  * struct mmc_uclass_priv - Holds information about a device used by the uclass
 273  */
 274 struct mmc_uclass_priv {
 275         struct mmc *mmc;
 276 };
 277
 278 /**
 279  * mmc_get_mmc_dev() - get the MMC struct pointer for a device
 280  *
 281  * Provided that the device is already probed and ready for use, this value
 282  * will be available.
 283  *
 284  * @dev:        Device
 285  * @return associated mmc struct pointer if available, else NULL
 286  */
 287 struct mmc *mmc_get_mmc_dev(struct udevice *dev);
 288
 289 /* End of driver model support */
 290
 291 struct mmc_cid {
 292         unsigned long psn;
 293         unsigned short oid;
 294         unsigned char mid;
 295         unsigned char prv;
 296         unsigned char mdt;
 297         char pnm[7];
 298 };
 299
 300 struct mmc_cmd {
 301         ushort cmdidx;
 302         uint resp_type;
 303         uint cmdarg;
 304         uint response[4];
 305 };
 306
 307 struct mmc_data {
 308         union {
 309                 char *dest;
 310                 const char *src; /* src buffers don't get written to */
 311         };
 312         uint flags;
 313         uint blocks;
 314         uint blocksize;
 315 };
 316
 317 /* forward decl. */
 318 struct mmc;
 319
 320 #ifdef CONFIG_DM_MMC_OPS
 321 struct dm_mmc_ops {
 322         /**
 323          * send_cmd() - Send a command to the MMC device
 324          *
 325          * @dev:        Device to receive the command
 326          * @cmd:        Command to send
 327          * @data:       Additional data to send/receive
 328          * @return 0 if OK, -ve on error
 329          */
 330         int (*send_cmd)(struct udevice *dev, struct mmc_cmd *cmd,
 331                         struct mmc_data *data);
 332
 333         /**
 334          * set_ios() - Set the I/O speed/width for an MMC device
 335          *
 336          * @dev:        Device to update
 337          * @return 0 if OK, -ve on error
 338          */
 339         int (*set_ios)(struct udevice *dev);
 340
 341         /**
 342          * get_cd() - See whether a card is present
 343          *
 344          * @dev:        Device to check
 345          * @return 0 if not present, 1 if present, -ve on error
 346          */
 347         int (*get_cd)(struct udevice *dev);
 348
 349         /**
 350          * get_wp() - See whether a card has write-protect enabled
 351          *
 352          * @dev:        Device to check
 353          * @return 0 if write-enabled, 1 if write-protected, -ve on error
 354          */
 355         int (*get_wp)(struct udevice *dev);
 356 };
 357
 358 #define mmc_get_ops(dev)        ((struct dm_mmc_ops *)(dev)->driver->ops)
 359
 360 int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
 361                     struct mmc_data *data);
 362 int dm_mmc_set_ios(struct udevice *dev);
 363 int dm_mmc_get_cd(struct udevice *dev);
 364 int dm_mmc_get_wp(struct udevice *dev);
 365
 366 /* Transition functions for compatibility */
 367 int mmc_set_ios(struct mmc *mmc);
 368 int mmc_getcd(struct mmc *mmc);
 369 int mmc_getwp(struct mmc *mmc);
 370
 371 #else
 372 struct mmc_ops {
 373         int (*send_cmd)(struct mmc *mmc,
 374                         struct mmc_cmd *cmd, struct mmc_data *data);
 375         void (*set_ios)(struct mmc *mmc);
 376         int (*init)(struct mmc *mmc);
 377         int (*getcd)(struct mmc *mmc);
 378         int (*getwp)(struct mmc *mmc);
 379 };
 380 #endif
 381
 382 struct mmc_config {
 383         const char *name;
 384 #ifndef CONFIG_DM_MMC_OPS
 385         const struct mmc_ops *ops;
 386 #endif
 387         uint host_caps;
 388         uint voltages;
 389         uint f_min;
 390         uint f_max;
 391         uint b_max;
 392         unsigned char part_type;
 393 };
 394
 395 /*
 396  * With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device
 397  * with mmc_get_mmc_dev().
 398  *
 399  * TODO struct mmc should be in mmc_private but it's hard to fix right now
 400  */
 401 struct mmc {
 402 #ifndef CONFIG_BLK
 403         struct list_head link;
 404 #endif
 405         const struct mmc_config *cfg;   /* provided configuration */
 406         uint version;
 407         void *priv;
 408         uint has_init;
 409         int high_capacity;
 410         uint bus_width;
 411         uint clock;
 412         uint card_caps;
 413         uint ocr;
 414         uint dsr;
 415         uint dsr_imp;
 416         uint scr[2];
 417         uint csd[4];
 418         uint cid[4];
 419         ushort rca;
 420         u8 part_support;
 421         u8 part_attr;
 422         u8 wr_rel_set;
 423         char part_config;
 424         uint tran_speed;
 425         uint read_bl_len;
 426         uint write_bl_len;
 427         uint erase_grp_size;    /* in 512-byte sectors */
 428         uint hc_wp_grp_size;    /* in 512-byte sectors */
 429         u64 capacity;
 430         u64 capacity_user;
 431         u64 capacity_boot;
 432         u64 capacity_rpmb;
 433         u64 capacity_gp[4];
 434         u64 enh_user_start;
 435         u64 enh_user_size;
 436 #ifndef CONFIG_BLK
 437         struct blk_desc block_dev;
 438 #endif
 439         char op_cond_pending;   /* 1 if we are waiting on an op_cond command */
 440         char init_in_progress;  /* 1 if we have done mmc_start_init() */
 441         char preinit;           /* start init as early as possible */
 442         int ddr_mode;
 443 #ifdef CONFIG_DM_MMC
 444         struct udevice *dev;    /* Device for this MMC controller */
 445 #endif
 446 };
 447
 448 struct mmc_hwpart_conf {
 449         struct {
 450                 uint enh_start; /* in 512-byte sectors */
 451                 uint enh_size;  /* in 512-byte sectors, if 0 no enh area */
 452                 unsigned wr_rel_change : 1;
 453                 unsigned wr_rel_set : 1;
 454         } user;
 455         struct {
 456                 uint size;      /* in 512-byte sectors */
 457                 unsigned enhanced : 1;
 458                 unsigned wr_rel_change : 1;
 459                 unsigned wr_rel_set : 1;
 460         } gp_part[4];
 461 };
 462
 463 enum mmc_hwpart_conf_mode {
 464         MMC_HWPART_CONF_CHECK,
 465         MMC_HWPART_CONF_SET,
 466         MMC_HWPART_CONF_COMPLETE,
 467 };
 468
 469 struct mmc *mmc_create(const struct mmc_config *cfg, void *priv);
 470
 471 /**
 472  * mmc_bind() - Set up a new MMC device ready for probing
 473  *
 474  * A child block device is bound with the IF_TYPE_MMC interface type. This
 475  * allows the device to be used with CONFIG_BLK
 476  *
 477  * @dev:        MMC device to set up
 478  * @mmc:        MMC struct
 479  * @cfg:        MMC configuration
 480  * @return 0 if OK, -ve on error
 481  */
 482 int mmc_bind(struct udevice *dev, struct mmc *mmc,
 483              const struct mmc_config *cfg);
 484 void mmc_destroy(struct mmc *mmc);
 485
 486 /**
 487  * mmc_unbind() - Unbind a MMC device's child block device
 488  *
 489  * @dev:        MMC device
 490  * @return 0 if OK, -ve on error
 491  */
 492 int mmc_unbind(struct udevice *dev);
 493 int mmc_initialize(bd_t *bis);
 494 int mmc_init(struct mmc *mmc);
 495 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
 496 void mmc_set_clock(struct mmc *mmc, uint clock);
 497 struct mmc *find_mmc_device(int dev_num);
 498 int mmc_set_dev(int dev_num);
 499 void print_mmc_devices(char separator);
 500
 501 /**
 502  * get_mmc_num() - get the total MMC device number
 503  *
 504  * @return 0 if there is no MMC device, else the number of devices
 505  */
 506 int get_mmc_num(void);
 507 int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf,
 508                       enum mmc_hwpart_conf_mode mode);
 509
 510 #ifndef CONFIG_DM_MMC_OPS
 511 int mmc_getcd(struct mmc *mmc);
 512 int board_mmc_getcd(struct mmc *mmc);
 513 int mmc_getwp(struct mmc *mmc);
 514 int board_mmc_getwp(struct mmc *mmc);
 515 #endif
 516
 517 int mmc_set_dsr(struct mmc *mmc, u16 val);
 518 /* Function to change the size of boot partition and rpmb partitions */
 519 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
 520                                         unsigned long rpmbsize);
 521 /* Function to modify the PARTITION_CONFIG field of EXT_CSD */
 522 int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
 523 /* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */
 524 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);
 525 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */
 526 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable);
 527 /* Functions to read / write the RPMB partition */
 528 int mmc_rpmb_set_key(struct mmc *mmc, void *key);
 529 int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter);
 530 int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk,
 531                   unsigned short cnt, unsigned char *key);
 532 int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
 533                    unsigned short cnt, unsigned char *key);
 534 /**
 535  * Start device initialization and return immediately; it does not block on
 536  * polling OCR (operation condition register) status.  Then you should call
 537  * mmc_init, which would block on polling OCR status and complete the device
 538  * initializatin.
 539  *
 540  * @param mmc   Pointer to a MMC device struct
 541  * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error.
 542  */
 543 int mmc_start_init(struct mmc *mmc);
 544
 545 /**
 546  * Set preinit flag of mmc device.
 547  *
 548  * This will cause the device to be pre-inited during mmc_initialize(),
 549  * which may save boot time if the device is not accessed until later.
 550  * Some eMMC devices take 200-300ms to init, but unfortunately they
 551  * must be sent a series of commands to even get them to start preparing
 552  * for operation.
 553  *
 554  * @param mmc           Pointer to a MMC device struct
 555  * @param preinit       preinit flag value
 556  */
 557 void mmc_set_preinit(struct mmc *mmc, int preinit);
 558
 559 #ifdef CONFIG_MMC_SPI
 560 #define mmc_host_is_spi(mmc)    ((mmc)->cfg->host_caps & MMC_MODE_SPI)
 561 #else
 562 #define mmc_host_is_spi(mmc)    0
 563 #endif
 564 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
 565
 566 void board_mmc_power_init(void);
 567 int board_mmc_init(bd_t *bis);
 568 int cpu_mmc_init(bd_t *bis);
 569 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
 570 int mmc_get_env_dev(void);
 571
 572 struct pci_device_id;
 573
 574 /**
 575  * pci_mmc_init() - set up PCI MMC devices
 576  *
 577  * This finds all the matching PCI IDs and sets them up as MMC devices.
 578  *
 579  * @name:               Name to use for devices
 580  * @mmc_supported:      PCI IDs to search for, terminated by {0, 0}
 581  */
 582 int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported);
 583
 584 /* Set block count limit because of 16 bit register limit on some hardware*/
 585 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
 586 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
 587 #endif
 588
 589 /**
 590  * mmc_get_blk_desc() - Get the block descriptor for an MMC device
 591  *
 592  * @mmc:        MMC device
 593  * @return block device if found, else NULL
 594  */
 595 struct blk_desc *mmc_get_blk_desc(struct mmc *mmc);
 596
 597 #endif /* _MMC_H_ */