include/mpc5xx.h

   1 /*
   2  * (C) Copyright 2003
   3  * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * File:                mpc5xx.h
  10  *
  11  * Discription:         mpc5xx specific definitions
  12  *
  13  */
  14
  15 #ifndef __MPC5XX_H__
  16 #define __MPC5XX_H__
  17
  18
  19 /*-----------------------------------------------------------------------
  20  * Exception offsets (PowerPC standard)
  21  */
  22 #define EXC_OFF_SYS_RESET       0x0100  /* System reset                         */
  23 #define _START_OFFSET           EXC_OFF_SYS_RESET
  24
  25 /*-----------------------------------------------------------------------
  26  * ISB bit in IMMR to set internal memory map
  27  */
  28
  29 #define CONFIG_SYS_ISB                  ((CONFIG_SYS_IMMR / 0x00400000) << 1)
  30
  31 /*-----------------------------------------------------------------------
  32  * SYPCR - System Protection Control Register
  33  */
  34 #define SYPCR_SWTC      0xffff0000      /* Software Watchdog Timer Count        */
  35 #define SYPCR_BMT       0x0000ff00      /* Bus Monitor Timing                   */
  36 #define SYPCR_BME       0x00000080      /* Bus Monitor Enable                   */
  37 #define SYPCR_SWF       0x00000008      /* Software Watchdog Freeze             */
  38 #define SYPCR_SWE       0x00000004      /* Software Watchdog Enable             */
  39 #define SYPCR_SWRI      0x00000002      /* Software Watchdog Reset/Int Select   */
  40 #define SYPCR_SWP       0x00000001      /* Software Watchdog Prescale           */
  41
  42 /*-----------------------------------------------------------------------
  43  * SIUMCR - SIU Module Configuration Register
  44  */
  45 #define SIUMCR_EARB     0x80000000      /* External Arbitration                 */
  46 #define SIUMCR_EARP0    0x00000000      /* External Arbi. Request priority 0    */
  47 #define SIUMCR_EARP1    0x10000000      /* External Arbi. Request priority 1    */
  48 #define SIUMCR_EARP2    0x20000000      /* External Arbi. Request priority 2    */
  49 #define SIUMCR_EARP3    0x30000000      /* External Arbi. Request priority 3    */
  50 #define SIUMCR_EARP4    0x40000000      /* External Arbi. Request priority 4    */
  51 #define SIUMCR_EARP5    0x50000000      /* External Arbi. Request priority 5    */
  52 #define SIUMCR_EARP6    0x60000000      /* External Arbi. Request priority 6    */
  53 #define SIUMCR_EARP7    0x70000000      /* External Arbi. Request priority 7    */
  54 #define SIUMCR_DSHW     0x00800000      /* Data Showcycles                      */
  55 #define SIUMCR_DBGC00   0x00000000      /* Debug pins configuration             */
  56 #define SIUMCR_DBGC01   0x00200000      /* - " -                                */
  57 #define SIUMCR_DBGC10   0x00400000      /* - " -                                */
  58 #define SIUMCR_DBGC11   0x00600000      /* - " -                                */
  59 #define SIUMCR_DBPC00   0x00000000      /* Debug Port pins Config.              */
  60 #define SIUMCR_DBPC01   0x00080000      /* - " -                                */
  61 #define SIUMCR_DBPC10   0x00100000      /* - " -                                */
  62 #define SIUMCR_DBPC11   0x00180000      /* - " -                                */
  63 #define SIUMCR_GPC00    0x00000000      /* General Pins Config                  */
  64 #define SIUMCR_GPC01    0x00020000      /* General Pins Config                  */
  65 #define SIUMCR_GPC10    0x00040000      /* General Pins Config                  */
  66 #define SIUMCR_GPC11    0x00060000      /* General Pins Config                  */
  67 #define SIUMCR_DLK      0x00010000      /* Debug Register Lock                  */
  68 #define SIUMCR_SC00     0x00000000      /* Multi Chip 32 bit                    */
  69 #define SIUMCR_SC01     0x00004000      /* Muilt Chip 16 bit                    */
  70 #define SIUMCR_SC10     0x00004000      /* Single adress show                   */
  71 #define SIUMCR_SC11     0x00006000      /* Single adress                        */
  72 #define SIUMCR_RCTX     0x00001000      /* Data Parity pins Config.             */
  73 #define SIUMCR_MLRC00   0x00000000      /* Multi Level Reserva. Ctrl            */
  74 #define SIUMCR_MLRC01   0x00000400      /* - " -                                */
  75 #define SIUMCR_MLRC10   0x00000800      /* - " -                                */
  76 #define SIUMCR_MLRC11   0x00000c00      /* - " -                                */
  77 #define SIUMCR_MTSC     0x00000100      /* Memory transfer                      */
  78
  79 /*-----------------------------------------------------------------------
  80  * TBSCR - Time Base Status and Control Register
  81  */
  82 #define TBSCR_REFA      ((ushort)0x0080)        /* Reference Interrupt Status A */
  83 #define TBSCR_REFB      ((ushort)0x0040)        /* Reference Interrupt Status B */
  84 #define TBSCR_TBF       ((ushort)0x0002)        /* Time Base stops while FREEZE */
  85
  86 /*-----------------------------------------------------------------------
  87  * PISCR - Periodic Interrupt Status and Control Register
  88  */
  89 #define PISCR_PITF      ((ushort)0x0002)        /* PIT stops when FREEZE        */
  90 #define PISCR_PS        0x0080                  /* Periodic Interrupt Status    */
  91
  92 /*-----------------------------------------------------------------------
  93  * PLPRCR - PLL, Low-Power, and Reset Control Register
  94  */
  95 #define PLPRCR_MF_MSK   0xfff00000      /* MF mask                              */
  96 #define PLPRCR_DIVF_MSK 0x0000001f      /* DIVF mask                            */
  97 #define PLPRCR_CSRC_MSK 0x00000400      /* CSRC mask                            */
  98 #define PLPRCR_MF_SHIFT 0x00000014      /* Multiplication factor shift value    */
  99 #define PLPRCR_DIVF_0   0x00000000      /* Division factor 0                    */
 100 #define PLPRCR_MF_9     0x00900000      /* Mulitipliaction factor 9             */
 101 #define PLPRCR_TEXPS    0x00004000      /* TEXP Status                          */
 102 #define PLPRCR_TMIST    0x00001000      /* Timers Interrupt Status              */
 103 #define PLPRCR_CSR      0x00000080      /* CheskStop Reset value                */
 104 #define PLPRCR_SPLSS    0x00008000      /* SPLL Lock Status Sticky bit          */
 105
 106 /*-----------------------------------------------------------------------
 107  * SCCR - System Clock and reset Control Register
 108  */
 109 #define SCCR_DFNL_MSK   0x00000070      /* DFNL mask                            */
 110 #define SCCR_DFNH_MSK   0x00000007      /* DFNH mask                            */
 111 #define SCCR_DFNL_SHIFT 0x0000004       /* DFNL shift value                     */
 112 #define SCCR_RTSEL      0x00100000      /* RTC circuit input source select      */
 113 #define SCCR_EBDF00     0x00000000      /* Division factor 1. CLKOUT is GCLK2   */
 114 #define SCCR_EBDF11     0x00060000      /* reserved                             */
 115 #define SCCR_TBS        0x02000000      /* Time Base Source                     */
 116 #define SCCR_RTDIV      0x01000000      /* RTC Clock Divide                     */
 117 #define SCCR_COM00      0x00000000      /* full strength CLKOUT output buffer   */
 118 #define SCCR_COM01      0x20000000      /* half strength CLKOUT output buffer   */
 119 #define SCCR_DFNL000    0x00000000      /* Division by 2 (default = minimum)    */
 120 #define SCCR_DFNH000    0x00000000      /* Division by 1 (default = minimum)    */
 121
 122 /*-----------------------------------------------------------------------
 123  * MC - Memory Controller
 124  */
 125 #define BR_V            0x00000001      /* Bank valid                           */
 126 #define BR_BI           0x00000002      /* Burst inhibit                        */
 127 #define BR_PS_8         0x00000400      /* 8 bit port size                      */
 128 #define BR_PS_16        0x00000800      /* 16 bit port size                     */
 129 #define BR_PS_32        0x00000000      /* 32 bit port size                     */
 130 #define BR_LBDIR        0x00000008      /* Late burst data in progess           */
 131 #define BR_SETA         0x00000004      /* External Data Acknowledge            */
 132 #define OR_SCY_3        0x00000030      /* 3 clock cycles wait states           */
 133 #define OR_SCY_1        0x00000000      /* 1 clock cycle wait state             */
 134 #define OR_SCY_8        0x00000080      /* 8 clock cycles wait states           */
 135 #define OR_TRLX         0x00000001      /* Timing relaxed                       */
 136 #define OR_BSCY         0x00000060      /* Burst beats length in clocks         */
 137 #define OR_ACS_10       0x00000600      /* Adress to chip-select setup          */
 138 #define OR_CSNT         0x00000800      /* Chip-select negotation time          */
 139 #define OR_ETHR         0x00000100      /* Extended hold time on read           */
 140 #define OR_ADDR_MK_FF   0xFF000000
 141 #define OR_ADDR_MK_FFFF 0xFFFF0000
 142
 143 /*-----------------------------------------------------------------------
 144  * UMCR - UIMB Module Configuration Register
 145  */
 146 #define UMCR_FSPEED     0x00000000      /* Full speed. Opposit of UMCR_HSPEED   */
 147 #define UMCR_HSPEED     0x10000000      /* Half speed                           */
 148
 149 /*-----------------------------------------------------------------------
 150  * ICTRL - I-Bus Support Control Register
 151  */
 152 #define ICTRL_ISCT_SER_7 0x00000007     /* All indirect change of flow          */
 153
 154
 155 #define NR_IRQS         0               /* Place this later in a separate file */
 156
 157 /*-----------------------------------------------------------------------
 158  * SCI - Serial communication interface
 159  */
 160
 161 #define SCI_TDRE        0x0100          /* Transmit data register empty         */
 162 #define SCI_TE          0x0008          /* Transmitter enabled                  */
 163 #define SCI_RE          0x0004          /* Receiver enabled                     */
 164 #define SCI_RDRF        0x0040          /* Receive data register full           */
 165 #define SCI_PE          0x0400          /* Parity enable                        */
 166 #define SCI_SCXBR_MK    0x1fff          /* Baudrate mask                        */
 167 #define SCI_SCXDR_MK    0x00ff          /* Data register mask                   */
 168 #define SCI_M_11        0x0200          /* Frame size is 11 bit                 */
 169 #define SCI_M_10        0x0000          /* Frame size is 10 bit                 */
 170 #define SCI_PORT_1      ((int)1)        /* Place this later somewhere better    */
 171 #define SCI_PORT_2      ((int)2)
 172
 173 #endif  /* __MPC5XX_H__ */