include/palmas.h

   1 /*
   2  * (C) Copyright 2012-2013
   3  * Texas Instruments, <www.ti.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7 #ifndef PALMAS_H
   8 #define PALMAS_H
   9
  10 #include <common.h>
  11 #include <i2c.h>
  12
  13 /* I2C chip addresses, TW6035/37 */
  14 #define TWL603X_CHIP_P1         0x48    /* Page 1 */
  15 #define TWL603X_CHIP_P2         0x49    /* Page 2 */
  16 #define TWL603X_CHIP_P3         0x4a    /* Page 3 */
  17
  18 /* TPS659038/39 */
  19 #define TPS65903X_CHIP_P1       0x58    /* Page 1 */
  20
  21 /* Page 1 registers (0x1XY translates to page 1, reg addr 0xXY): */
  22
  23 /* LDO1 control/voltage */
  24 #define LDO1_CTRL               0x50
  25 #define LDO1_VOLTAGE            0x51
  26
  27 /* LDO1 control/voltage for LP873x */
  28 #define LP873X_LDO1_ADDR        0x60
  29 #define LP873X_LDO1_CTRL        0x9
  30 #define LP873X_LDO1_VOLTAGE     0xa
  31 #define LP873X_LDO_VOLT_3V0     0x19
  32 #define LP873X_LDO_VOLT_1V8     0xa
  33 #define LP873X_LDO_CTRL_EN      (0x1 << 0)
  34 #define LP873X_LDO_CTRL_EN_PINCTRL      (0x1 << 1)
  35 #define LP873X_LDO_CTRL_RDIS_EN (0x1 << 2)
  36
  37 /* LDO2 control/voltage */
  38 #define LDO2_CTRL               0x52
  39 #define LDO2_VOLTAGE            0x53
  40
  41 /* LDO9 control/voltage */
  42 #define LDO9_CTRL               0x60
  43 #define LDO9_VOLTAGE            0x61
  44
  45 /* LDOUSB control/voltage */
  46 #define LDOUSB_CTRL             0x64
  47 #define LDOUSB_VOLTAGE          0x65
  48 #define LDO_CTRL                0x6a
  49
  50 /* Control of 32 kHz audio clock */
  51 #define CLK32KGAUDIO_CTRL       0xd5
  52
  53 /* SYSEN2_CTRL for VCC_3v3_AUX supply on the sEVM */
  54 #define SYSEN2_CTRL             0xd9
  55
  56 /*
  57  * Bit field definitions for LDOx_CTRL, SYSENx_CTRL
  58  * and some other xxx_CTRL resources:
  59  */
  60 #define LDO9_BYP_EN             (1 << 6)        /* LDO9 only! */
  61 #define RSC_STAT_ON             (1 << 4)        /* RO status bit! */
  62 #define RSC_MODE_SLEEP          (1 << 2)
  63 #define RSC_MODE_ACTIVE         (1 << 0)
  64
  65 /* Some LDO voltage values */
  66 #define LDO_VOLT_OFF            0
  67 #define LDO_VOLT_1V8            0x13
  68 #define LDO_VOLT_3V0            0x2b
  69 #define LDO_VOLT_3V3            0x31
  70 /* Request bypass, LDO9 only */
  71 #define LDO9_BYPASS             0x3f
  72
  73 /* SMPS7_CTRL */
  74 #define SMPS7_CTRL              0x30
  75
  76 /* SMPS9_CTRL */
  77 #define SMPS9_CTRL              0x38
  78 #define SMPS9_VOLTAGE           0x3b
  79
  80 /* SMPS10_CTRL */
  81 #define SMPS10_CTRL             0x3c
  82 #define SMPS10_MODE_ACTIVE_D    0x0d
  83
  84 /* Bit field definitions for SMPSx_CTRL */
  85 #define SMPS_MODE_ACT_AUTO      1
  86 #define SMPS_MODE_ACT_ECO       2
  87 #define SMPS_MODE_ACT_FPWM      3
  88 #define SMPS_MODE_SLP_AUTO      (1 << 2)
  89 #define SMPS_MODE_SLP_ECO       (2 << 2)
  90 #define SMPS_MODE_SLP_FPWM      (3 << 2)
  91
  92 /*
  93  * Some popular SMPS voltages, all with RANGE=1; note
  94  * that RANGE cannot be changed on the fly
  95  */
  96 #define SMPS_VOLT_OFF           0
  97 #define SMPS_VOLT_1V2           0x90
  98 #define SMPS_VOLT_1V8           0xae
  99 #define SMPS_VOLT_2V1           0xbd
 100 #define SMPS_VOLT_3V0           0xea
 101 #define SMPS_VOLT_3V3           0xf9
 102
 103 /* Backup Battery & VRTC Control */
 104 #define BB_VRTC_CTRL            0xa8
 105 /* Bit definitions for BB_VRTC_CTRL */
 106 #define VRTC_EN_SLP             (1 << 6)
 107 #define VRTC_EN_OFF             (1 << 5)
 108 #define VRTC_PWEN               (1 << 4)
 109 #define BB_LOW_ICHRG            (1 << 3)
 110 #define BB_HIGH_ICHRG           (0 << 3)
 111 #define BB_VSEL_3V0             (0 << 1)
 112 #define BB_VSEL_2V5             (1 << 1)
 113 #define BB_VSEL_3V15            (2 << 1)
 114 #define BB_VSEL_VBAT            (3 << 1)
 115 #define BB_CHRG_EN              (1 << 0)
 116
 117 /*
 118  * Functions to read and write from TPS659038/TWL6035/TWL6037
 119  * or other Palmas family of TI PMICs
 120  */
 121 static inline int palmas_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
 122 {
 123         return i2c_write(chip_no, reg, 1, &val, 1);
 124 }
 125
 126 static inline int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
 127 {
 128         return i2c_read(chip_no, reg, 1, val, 1);
 129 }
 130
 131 void palmas_init_settings(void);
 132 int palmas_mmc1_poweron_ldo(uint voltage);
 133 int lp873x_mmc1_poweron_ldo(uint voltage);
 134 int twl603x_mmc1_set_ldo9(u8 vsel);
 135 int twl603x_audio_power(u8 on);
 136 int twl603x_enable_bb_charge(u8 bb_fields);
 137 int palmas_enable_ss_ldo(void);
 138
 139 #endif /* PALMAS_H */