]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/status_led.h
Convert CONFIG_BOOTCOUNT_ENV to Kconfig
[people/ms/u-boot.git] / include / status_led.h
1 /*
2 * (C) Copyright 2000-2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8 /*
9 * The purpose of this code is to signal the operational status of a
10 * target which usually boots over the network; while running in
11 * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
12 * message has been received, the LED is turned off. The Linux
13 * kernel, once it is running, will start blinking the LED again,
14 * with another frequency.
15 */
16
17 #ifndef _STATUS_LED_H_
18 #define _STATUS_LED_H_
19
20 #ifdef CONFIG_LED_STATUS
21
22 #define LED_STATUS_PERIOD (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ)
23 #ifdef CONFIG_LED_STATUS1
24 #define LED_STATUS_PERIOD1 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ1)
25 #endif /* CONFIG_LED_STATUS1 */
26 #ifdef CONFIG_LED_STATUS2
27 #define LED_STATUS_PERIOD2 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ2)
28 #endif /* CONFIG_LED_STATUS2 */
29 #ifdef CONFIG_LED_STATUS3
30 #define LED_STATUS_PERIOD3 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ3)
31 #endif /* CONFIG_LED_STATUS3 */
32 #ifdef CONFIG_LED_STATUS4
33 #define LED_STATUS_PERIOD4 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ4)
34 #endif /* CONFIG_LED_STATUS4 */
35 #ifdef CONFIG_LED_STATUS5
36 #define LED_STATUS_PERIOD5 (CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ5)
37 #endif /* CONFIG_LED_STATUS5 */
38
39 void status_led_init(void);
40 void status_led_tick (unsigned long timestamp);
41 void status_led_set (int led, int state);
42
43 /***** MVS v1 **********************************************************/
44 #if (defined(CONFIG_MVS) && CONFIG_MVS < 2)
45 # define STATUS_LED_PAR im_ioport.iop_pdpar
46 # define STATUS_LED_DIR im_ioport.iop_pddir
47 # undef STATUS_LED_ODR
48 # define STATUS_LED_DAT im_ioport.iop_pddat
49
50 # define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
51
52 /***** Someone else defines these *************************************/
53 #elif defined(STATUS_LED_PAR)
54 /*
55 * ADVICE: Define in your board configuration file rather than
56 * filling this file up with lots of custom board stuff.
57 */
58
59 #elif defined(CONFIG_LED_STATUS_BOARD_SPECIFIC)
60 /* led_id_t is unsigned long mask */
61 typedef unsigned long led_id_t;
62
63 extern void __led_toggle (led_id_t mask);
64 extern void __led_init (led_id_t mask, int state);
65 extern void __led_set (led_id_t mask, int state);
66 void __led_blink(led_id_t mask, int freq);
67 #else
68 # error Status LED configuration missing
69 #endif
70 /************************************************************************/
71
72 #ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC
73 # include <asm/status_led.h>
74 #endif
75
76 #endif /* CONFIG_LED_STATUS */
77
78 /*
79 * Coloured LEDs API
80 */
81 #ifndef __ASSEMBLY__
82 void coloured_LED_init(void);
83 void red_led_on(void);
84 void red_led_off(void);
85 void green_led_on(void);
86 void green_led_off(void);
87 void yellow_led_on(void);
88 void yellow_led_off(void);
89 void blue_led_on(void);
90 void blue_led_off(void);
91 #else
92 .extern LED_init
93 .extern red_led_on
94 .extern red_led_off
95 .extern yellow_led_on
96 .extern yellow_led_off
97 .extern green_led_on
98 .extern green_led_off
99 .extern blue_led_on
100 .extern blue_led_off
101 #endif
102
103 #endif /* _STATUS_LED_H_ */