nand_spl/nand_boot_fsl_nfc.c

   1 /*
   2  * (C) Copyright 2009
   3  * Magnus Lilja <lilja.magnus@gmail.com>
   4  *
   5  * (C) Copyright 2008
   6  * Maxim Artamonov, <scn1874 at yandex.ru>
   7  *
   8  * (C) Copyright 2006-2008
   9  * Stefan Roese, DENX Software Engineering, sr at denx.de.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #include <common.h>
  28 #include <nand.h>
  29 #ifdef CONFIG_MX31
  30 #include <asm/arch/mx31-regs.h>
  31 #else
  32 #include <asm/arch/imx-regs.h>
  33 #endif
  34 #include <asm/io.h>
  35 #include <fsl_nfc.h>
  36
  37 static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR;
  38
  39 static void nfc_wait_ready(void)
  40 {
  41         uint32_t tmp;
  42
  43         while (!(readw(&nfc->nand_flash_config2) & NFC_INT))
  44                 ;
  45
  46         /* Reset interrupt flag */
  47         tmp = readw(&nfc->nand_flash_config2);
  48         tmp &= ~NFC_INT;
  49         writew(tmp, &nfc->nand_flash_config2);
  50 }
  51
  52 void nfc_nand_init(void)
  53 {
  54 #if defined(MXC_NFC_V1_1)
  55         int ecc_per_page  = CONFIG_SYS_NAND_PAGE_SIZE / 512;
  56         int config1;
  57
  58         writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
  59
  60         /* unlocking RAM Buff */
  61         writew(0x2, &nfc->configuration);
  62
  63         /* hardware ECC checking and correct */
  64         config1 = readw(&nfc->nand_flash_config1) | NFC_ECC_EN | 0x800;
  65         /*
  66          * if spare size is larger that 16 bytes per 512 byte hunk
  67          * then use 8 symbol correction instead of 4
  68          */
  69         if ((CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page) > 16)
  70                 config1 &= ~NFC_4_8N_ECC;
  71         else
  72                 config1 |= NFC_4_8N_ECC;
  73         writew(config1, &nfc->nand_flash_config1);
  74 #elif defined(MXC_NFC_V1)
  75         /* unlocking RAM Buff */
  76         writew(0x2, &nfc->configuration);
  77
  78         /* hardware ECC checking and correct */
  79         writew(NFC_ECC_EN, &nfc->nand_flash_config1);
  80 #endif
  81 }
  82
  83 static void nfc_nand_command(unsigned short command)
  84 {
  85         writew(command, &nfc->flash_cmd);
  86         writew(NFC_CMD, &nfc->nand_flash_config2);
  87         nfc_wait_ready();
  88 }
  89
  90 static void nfc_nand_page_address(unsigned int page_address)
  91 {
  92         unsigned int page_count;
  93
  94         writew(0x00, &nfc->flash_add);
  95         writew(NFC_ADDR, &nfc->nand_flash_config2);
  96         nfc_wait_ready();
  97
  98         /* code only for large page flash */
  99         if (CONFIG_SYS_NAND_PAGE_SIZE > 512) {
 100                 writew(0x00, &nfc->flash_add);
 101                 writew(NFC_ADDR, &nfc->nand_flash_config2);
 102                 nfc_wait_ready();
 103         }
 104
 105         page_count = CONFIG_SYS_NAND_SIZE / CONFIG_SYS_NAND_PAGE_SIZE;
 106
 107         if (page_address <= page_count) {
 108                 page_count--; /* transform 0x01000000 to 0x00ffffff */
 109                 do {
 110                         writew(page_address & 0xff, &nfc->flash_add);
 111                         writew(NFC_ADDR, &nfc->nand_flash_config2);
 112                         nfc_wait_ready();
 113                         page_address = page_address >> 8;
 114                         page_count = page_count >> 8;
 115                 } while (page_count);
 116         }
 117
 118         writew(0x00, &nfc->flash_add);
 119         writew(NFC_ADDR, &nfc->nand_flash_config2);
 120         nfc_wait_ready();
 121 }
 122
 123 static void nfc_nand_data_output(void)
 124 {
 125         int config1 = readw(&nfc->nand_flash_config1);
 126 #ifdef NAND_MXC_2K_MULTI_CYCLE
 127         int i;
 128 #endif
 129
 130         config1 |= NFC_ECC_EN | NFC_INT_MSK;
 131         writew(config1, &nfc->nand_flash_config1);
 132         writew(0, &nfc->buffer_address);
 133         writew(NFC_OUTPUT, &nfc->nand_flash_config2);
 134         nfc_wait_ready();
 135 #ifdef NAND_MXC_2K_MULTI_CYCLE
 136         /*
 137          * This NAND controller requires multiple input commands
 138          * for pages larger than 512 bytes.
 139          */
 140         for (i = 1; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
 141                 config1 = readw(&nfc->nand_flash_config1);
 142                 config1 |= NFC_ECC_EN | NFC_INT_MSK;
 143                 writew(config1, &nfc->nand_flash_config1);
 144                 writew(i, &nfc->buffer_address);
 145                 writew(NFC_OUTPUT, &nfc->nand_flash_config2);
 146                 nfc_wait_ready();
 147         }
 148 #endif
 149 }
 150
 151 static int nfc_nand_check_ecc(void)
 152 {
 153         return readw(&nfc->ecc_status_result);
 154 }
 155
 156 static int nfc_read_page(unsigned int page_address, unsigned char *buf)
 157 {
 158         int i;
 159         u32 *src;
 160         u32 *dst;
 161
 162         writew(0, &nfc->buffer_address); /* read in first 0 buffer */
 163         nfc_nand_command(NAND_CMD_READ0);
 164         nfc_nand_page_address(page_address);
 165
 166         if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
 167                 nfc_nand_command(NAND_CMD_READSTART);
 168
 169         nfc_nand_data_output(); /* fill the main buffer 0 */
 170
 171         if (nfc_nand_check_ecc())
 172                 return -1;
 173
 174         src = &nfc->main_area[0][0];
 175         dst = (u32 *)buf;
 176
 177         /* main copy loop from NAND-buffer to SDRAM memory */
 178         for (i = 0; i < (CONFIG_SYS_NAND_PAGE_SIZE / 4); i++) {
 179                 writel(readl(src), dst);
 180                 src++;
 181                 dst++;
 182         }
 183
 184         return 0;
 185 }
 186
 187 static int is_badblock(int pagenumber)
 188 {
 189         int page = pagenumber;
 190         u32 badblock;
 191         u32 *src;
 192
 193         /* Check the first two pages for bad block markers */
 194         for (page = pagenumber; page < pagenumber + 2; page++) {
 195                 writew(0, &nfc->buffer_address); /* read in first 0 buffer */
 196                 nfc_nand_command(NAND_CMD_READ0);
 197                 nfc_nand_page_address(page);
 198
 199                 if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
 200                         nfc_nand_command(NAND_CMD_READSTART);
 201
 202                 nfc_nand_data_output(); /* fill the main buffer 0 */
 203
 204                 src = &nfc->spare_area[0][0];
 205
 206                 /*
 207                  * IMPORTANT NOTE: The nand flash controller uses a non-
 208                  * standard layout for large page devices. This can
 209                  * affect the position of the bad block marker.
 210                  */
 211                 /* Get the bad block marker */
 212                 badblock = readl(&src[CONFIG_SYS_NAND_BAD_BLOCK_POS / 4]);
 213                 badblock >>= 8 * (CONFIG_SYS_NAND_BAD_BLOCK_POS % 4);
 214                 badblock &= 0xff;
 215
 216                 /* bad block marker verify */
 217                 if (badblock != 0xff)
 218                         return 1; /* potential bad block */
 219         }
 220
 221         return 0;
 222 }
 223
 224 static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
 225 {
 226         int i;
 227         unsigned int page;
 228         unsigned int maxpages = CONFIG_SYS_NAND_SIZE /
 229                                 CONFIG_SYS_NAND_PAGE_SIZE;
 230
 231         nfc_nand_init();
 232
 233         /* Convert to page number */
 234         page = from / CONFIG_SYS_NAND_PAGE_SIZE;
 235         i = 0;
 236
 237         while (i < (size / CONFIG_SYS_NAND_PAGE_SIZE)) {
 238                 if (nfc_read_page(page, buf) < 0)
 239                         return -1;
 240
 241                 page++;
 242                 i++;
 243                 buf = buf + CONFIG_SYS_NAND_PAGE_SIZE;
 244
 245                 /*
 246                  * Check if we have crossed a block boundary, and if so
 247                  * check for bad block.
 248                  */
 249                 if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) {
 250                         /*
 251                          * Yes, new block. See if this block is good. If not,
 252                          * loop until we find a good block.
 253                          */
 254                         while (is_badblock(page)) {
 255                                 page = page + CONFIG_SYS_NAND_PAGE_COUNT;
 256                                 /* Check i we've reached the end of flash. */
 257                                 if (page >= maxpages)
 258                                         return -1;
 259                         }
 260                 }
 261         }
 262
 263         return 0;
 264 }
 265
 266 #if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 267 void board_init_f (ulong bootflag)
 268 {
 269         relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, TEXT_BASE);
 270 }
 271 #endif
 272
 273 /*
 274  * The main entry for NAND booting. It's necessary that SDRAM is already
 275  * configured and available since this code loads the main U-Boot image
 276  * from NAND into SDRAM and starts it from there.
 277  */
 278 void nand_boot(void)
 279 {
 280         __attribute__((noreturn)) void (*uboot)(void);
 281
 282         /*
 283          * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must
 284          * be aligned to full pages
 285          */
 286         if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
 287                        (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
 288                 /* Copy from NAND successful, start U-boot */
 289                 uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
 290                 uboot();
 291         } else {
 292                 /* Unrecoverable error when copying from NAND */
 293                 hang();
 294         }
 295 }
 296
 297 /*
 298  * Called in case of an exception.
 299  */
 300 void hang(void)
 301 {
 302         /* Loop forever */
 303         while (1) ;
 304 }