]> git.ipfire.org Git - people/ms/u-boot.git/blob - net/eth-uclass.c
Merge git://git.denx.de/u-boot-dm
[people/ms/u-boot.git] / net / eth-uclass.c
1 /*
2 * (C) Copyright 2001-2015
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 * Joe Hershberger, National Instruments
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9 #include <common.h>
10 #include <dm.h>
11 #include <environment.h>
12 #include <net.h>
13 #include <dm/device-internal.h>
14 #include <dm/uclass-internal.h>
15 #include "eth_internal.h"
16
17 /**
18 * struct eth_device_priv - private structure for each Ethernet device
19 *
20 * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
21 */
22 struct eth_device_priv {
23 enum eth_state_t state;
24 };
25
26 /**
27 * struct eth_uclass_priv - The structure attached to the uclass itself
28 *
29 * @current: The Ethernet device that the network functions are using
30 */
31 struct eth_uclass_priv {
32 struct udevice *current;
33 };
34
35 /* eth_errno - This stores the most recent failure code from DM functions */
36 static int eth_errno;
37
38 static struct eth_uclass_priv *eth_get_uclass_priv(void)
39 {
40 struct uclass *uc;
41
42 uclass_get(UCLASS_ETH, &uc);
43 assert(uc);
44 return uc->priv;
45 }
46
47 void eth_set_current_to_next(void)
48 {
49 struct eth_uclass_priv *uc_priv;
50
51 uc_priv = eth_get_uclass_priv();
52 if (uc_priv->current)
53 uclass_next_device(&uc_priv->current);
54 if (!uc_priv->current)
55 uclass_first_device(UCLASS_ETH, &uc_priv->current);
56 }
57
58 /*
59 * Typically this will simply return the active device.
60 * In the case where the most recent active device was unset, this will attempt
61 * to return the first device. If that device doesn't exist or fails to probe,
62 * this function will return NULL.
63 */
64 struct udevice *eth_get_dev(void)
65 {
66 struct eth_uclass_priv *uc_priv;
67
68 uc_priv = eth_get_uclass_priv();
69 if (!uc_priv->current)
70 eth_errno = uclass_first_device(UCLASS_ETH,
71 &uc_priv->current);
72 return uc_priv->current;
73 }
74
75 /*
76 * Typically this will just store a device pointer.
77 * In case it was not probed, we will attempt to do so.
78 * dev may be NULL to unset the active device.
79 */
80 void eth_set_dev(struct udevice *dev)
81 {
82 if (dev && !device_active(dev)) {
83 eth_errno = device_probe(dev);
84 if (eth_errno)
85 dev = NULL;
86 }
87
88 eth_get_uclass_priv()->current = dev;
89 }
90
91 /*
92 * Find the udevice that either has the name passed in as devname or has an
93 * alias named devname.
94 */
95 struct udevice *eth_get_dev_by_name(const char *devname)
96 {
97 int seq = -1;
98 char *endp = NULL;
99 const char *startp = NULL;
100 struct udevice *it;
101 struct uclass *uc;
102 int len = strlen("eth");
103
104 /* Must be longer than 3 to be an alias */
105 if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
106 startp = devname + len;
107 seq = simple_strtoul(startp, &endp, 10);
108 }
109
110 uclass_get(UCLASS_ETH, &uc);
111 uclass_foreach_dev(it, uc) {
112 /*
113 * We need the seq to be valid, so try to probe it.
114 * If the probe fails, the seq will not match since it will be
115 * -1 instead of what we are looking for.
116 * We don't care about errors from probe here. Either they won't
117 * match an alias or it will match a literal name and we'll pick
118 * up the error when we try to probe again in eth_set_dev().
119 */
120 if (device_probe(it))
121 continue;
122 /* Check for the name or the sequence number to match */
123 if (strcmp(it->name, devname) == 0 ||
124 (endp > startp && it->seq == seq))
125 return it;
126 }
127
128 return NULL;
129 }
130
131 unsigned char *eth_get_ethaddr(void)
132 {
133 struct eth_pdata *pdata;
134
135 if (eth_get_dev()) {
136 pdata = eth_get_dev()->platdata;
137 return pdata->enetaddr;
138 }
139
140 return NULL;
141 }
142
143 /* Set active state without calling start on the driver */
144 int eth_init_state_only(void)
145 {
146 struct udevice *current;
147 struct eth_device_priv *priv;
148
149 current = eth_get_dev();
150 if (!current || !device_active(current))
151 return -EINVAL;
152
153 priv = current->uclass_priv;
154 priv->state = ETH_STATE_ACTIVE;
155
156 return 0;
157 }
158
159 /* Set passive state without calling stop on the driver */
160 void eth_halt_state_only(void)
161 {
162 struct udevice *current;
163 struct eth_device_priv *priv;
164
165 current = eth_get_dev();
166 if (!current || !device_active(current))
167 return;
168
169 priv = current->uclass_priv;
170 priv->state = ETH_STATE_PASSIVE;
171 }
172
173 int eth_get_dev_index(void)
174 {
175 if (eth_get_dev())
176 return eth_get_dev()->seq;
177 return -1;
178 }
179
180 static int eth_write_hwaddr(struct udevice *dev)
181 {
182 struct eth_pdata *pdata = dev->platdata;
183 int ret = 0;
184
185 if (!dev || !device_active(dev))
186 return -EINVAL;
187
188 /* seq is valid since the device is active */
189 if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
190 if (!is_valid_ethaddr(pdata->enetaddr)) {
191 printf("\nError: %s address %pM illegal value\n",
192 dev->name, pdata->enetaddr);
193 return -EINVAL;
194 }
195
196 /*
197 * Drivers are allowed to decide not to implement this at
198 * run-time. E.g. Some devices may use it and some may not.
199 */
200 ret = eth_get_ops(dev)->write_hwaddr(dev);
201 if (ret == -ENOSYS)
202 ret = 0;
203 if (ret)
204 printf("\nWarning: %s failed to set MAC address\n",
205 dev->name);
206 }
207
208 return ret;
209 }
210
211 static int on_ethaddr(const char *name, const char *value, enum env_op op,
212 int flags)
213 {
214 int index;
215 int retval;
216 struct udevice *dev;
217
218 /* look for an index after "eth" */
219 index = simple_strtoul(name + 3, NULL, 10);
220
221 retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
222 if (!retval) {
223 struct eth_pdata *pdata = dev->platdata;
224 switch (op) {
225 case env_op_create:
226 case env_op_overwrite:
227 eth_parse_enetaddr(value, pdata->enetaddr);
228 break;
229 case env_op_delete:
230 memset(pdata->enetaddr, 0, 6);
231 }
232 }
233
234 return 0;
235 }
236 U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
237
238 int eth_init(void)
239 {
240 char *ethact = getenv("ethact");
241 char *ethrotate = getenv("ethrotate");
242 struct udevice *current = NULL;
243 struct udevice *old_current;
244 int ret = -ENODEV;
245
246 /*
247 * When 'ethrotate' variable is set to 'no' and 'ethact' variable
248 * is already set to an ethernet device, we should stick to 'ethact'.
249 */
250 if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
251 if (ethact) {
252 current = eth_get_dev_by_name(ethact);
253 if (!current)
254 return -EINVAL;
255 }
256 }
257
258 if (!current) {
259 current = eth_get_dev();
260 if (!current) {
261 printf("No ethernet found.\n");
262 return -ENODEV;
263 }
264 }
265
266 old_current = current;
267 do {
268 if (current) {
269 debug("Trying %s\n", current->name);
270
271 if (device_active(current)) {
272 ret = eth_get_ops(current)->start(current);
273 if (ret >= 0) {
274 struct eth_device_priv *priv =
275 current->uclass_priv;
276
277 priv->state = ETH_STATE_ACTIVE;
278 return 0;
279 }
280 } else {
281 ret = eth_errno;
282 }
283
284 debug("FAIL\n");
285 } else {
286 debug("PROBE FAIL\n");
287 }
288
289 /*
290 * If ethrotate is enabled, this will change "current",
291 * otherwise we will drop out of this while loop immediately
292 */
293 eth_try_another(0);
294 /* This will ensure the new "current" attempted to probe */
295 current = eth_get_dev();
296 } while (old_current != current);
297
298 return ret;
299 }
300
301 void eth_halt(void)
302 {
303 struct udevice *current;
304 struct eth_device_priv *priv;
305
306 current = eth_get_dev();
307 if (!current || !device_active(current))
308 return;
309
310 eth_get_ops(current)->stop(current);
311 priv = current->uclass_priv;
312 priv->state = ETH_STATE_PASSIVE;
313 }
314
315 int eth_is_active(struct udevice *dev)
316 {
317 struct eth_device_priv *priv;
318
319 if (!dev || !device_active(dev))
320 return 0;
321
322 priv = dev_get_uclass_priv(dev);
323 return priv->state == ETH_STATE_ACTIVE;
324 }
325
326 int eth_send(void *packet, int length)
327 {
328 struct udevice *current;
329 int ret;
330
331 current = eth_get_dev();
332 if (!current)
333 return -ENODEV;
334
335 if (!device_active(current))
336 return -EINVAL;
337
338 ret = eth_get_ops(current)->send(current, packet, length);
339 if (ret < 0) {
340 /* We cannot completely return the error at present */
341 debug("%s: send() returned error %d\n", __func__, ret);
342 }
343 return ret;
344 }
345
346 int eth_rx(void)
347 {
348 struct udevice *current;
349 uchar *packet;
350 int flags;
351 int ret;
352 int i;
353
354 current = eth_get_dev();
355 if (!current)
356 return -ENODEV;
357
358 if (!device_active(current))
359 return -EINVAL;
360
361 /* Process up to 32 packets at one time */
362 flags = ETH_RECV_CHECK_DEVICE;
363 for (i = 0; i < 32; i++) {
364 ret = eth_get_ops(current)->recv(current, flags, &packet);
365 flags = 0;
366 if (ret > 0)
367 net_process_received_packet(packet, ret);
368 if (ret >= 0 && eth_get_ops(current)->free_pkt)
369 eth_get_ops(current)->free_pkt(current, packet, ret);
370 if (ret <= 0)
371 break;
372 }
373 if (ret == -EAGAIN)
374 ret = 0;
375 if (ret < 0) {
376 /* We cannot completely return the error at present */
377 debug("%s: recv() returned error %d\n", __func__, ret);
378 }
379 return ret;
380 }
381
382 int eth_initialize(void)
383 {
384 int num_devices = 0;
385 struct udevice *dev;
386
387 eth_common_init();
388
389 /*
390 * Devices need to write the hwaddr even if not started so that Linux
391 * will have access to the hwaddr that u-boot stored for the device.
392 * This is accomplished by attempting to probe each device and calling
393 * their write_hwaddr() operation.
394 */
395 uclass_first_device(UCLASS_ETH, &dev);
396 if (!dev) {
397 printf("No ethernet found.\n");
398 bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
399 } else {
400 char *ethprime = getenv("ethprime");
401 struct udevice *prime_dev = NULL;
402
403 if (ethprime)
404 prime_dev = eth_get_dev_by_name(ethprime);
405 if (prime_dev) {
406 eth_set_dev(prime_dev);
407 eth_current_changed();
408 } else {
409 eth_set_dev(NULL);
410 }
411
412 bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
413 do {
414 if (num_devices)
415 printf(", ");
416
417 printf("eth%d: %s", dev->seq, dev->name);
418
419 if (ethprime && dev == prime_dev)
420 printf(" [PRIME]");
421
422 eth_write_hwaddr(dev);
423
424 uclass_next_device(&dev);
425 num_devices++;
426 } while (dev);
427
428 putc('\n');
429 }
430
431 return num_devices;
432 }
433
434 static int eth_post_bind(struct udevice *dev)
435 {
436 if (strchr(dev->name, ' ')) {
437 printf("\nError: eth device name \"%s\" has a space!\n",
438 dev->name);
439 return -EINVAL;
440 }
441
442 return 0;
443 }
444
445 static int eth_pre_unbind(struct udevice *dev)
446 {
447 /* Don't hang onto a pointer that is going away */
448 if (dev == eth_get_uclass_priv()->current)
449 eth_set_dev(NULL);
450
451 return 0;
452 }
453
454 static int eth_post_probe(struct udevice *dev)
455 {
456 struct eth_device_priv *priv = dev->uclass_priv;
457 struct eth_pdata *pdata = dev->platdata;
458 unsigned char env_enetaddr[6];
459
460 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
461 struct eth_ops *ops = eth_get_ops(dev);
462 static int reloc_done;
463
464 if (!reloc_done) {
465 if (ops->start)
466 ops->start += gd->reloc_off;
467 if (ops->send)
468 ops->send += gd->reloc_off;
469 if (ops->recv)
470 ops->recv += gd->reloc_off;
471 if (ops->free_pkt)
472 ops->free_pkt += gd->reloc_off;
473 if (ops->stop)
474 ops->stop += gd->reloc_off;
475 #ifdef CONFIG_MCAST_TFTP
476 if (ops->mcast)
477 ops->mcast += gd->reloc_off;
478 #endif
479 if (ops->write_hwaddr)
480 ops->write_hwaddr += gd->reloc_off;
481 if (ops->read_rom_hwaddr)
482 ops->read_rom_hwaddr += gd->reloc_off;
483
484 reloc_done++;
485 }
486 #endif
487
488 priv->state = ETH_STATE_INIT;
489
490 /* Check if the device has a MAC address in ROM */
491 if (eth_get_ops(dev)->read_rom_hwaddr)
492 eth_get_ops(dev)->read_rom_hwaddr(dev);
493
494 eth_getenv_enetaddr_by_index("eth", dev->seq, env_enetaddr);
495 if (!is_zero_ethaddr(env_enetaddr)) {
496 if (!is_zero_ethaddr(pdata->enetaddr) &&
497 memcmp(pdata->enetaddr, env_enetaddr, 6)) {
498 printf("\nWarning: %s MAC addresses don't match:\n",
499 dev->name);
500 printf("Address in SROM is %pM\n",
501 pdata->enetaddr);
502 printf("Address in environment is %pM\n",
503 env_enetaddr);
504 }
505
506 /* Override the ROM MAC address */
507 memcpy(pdata->enetaddr, env_enetaddr, 6);
508 } else if (is_valid_ethaddr(pdata->enetaddr)) {
509 eth_setenv_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
510 printf("\nWarning: %s using MAC address from ROM\n",
511 dev->name);
512 } else if (is_zero_ethaddr(pdata->enetaddr)) {
513 #ifdef CONFIG_NET_RANDOM_ETHADDR
514 net_random_ethaddr(pdata->enetaddr);
515 printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
516 dev->name, dev->seq, pdata->enetaddr);
517 #else
518 printf("\nError: %s address not set.\n",
519 dev->name);
520 return -EINVAL;
521 #endif
522 }
523
524 return 0;
525 }
526
527 static int eth_pre_remove(struct udevice *dev)
528 {
529 struct eth_pdata *pdata = dev->platdata;
530
531 eth_get_ops(dev)->stop(dev);
532
533 /* clear the MAC address */
534 memset(pdata->enetaddr, 0, 6);
535
536 return 0;
537 }
538
539 UCLASS_DRIVER(eth) = {
540 .name = "eth",
541 .id = UCLASS_ETH,
542 .post_bind = eth_post_bind,
543 .pre_unbind = eth_pre_unbind,
544 .post_probe = eth_post_probe,
545 .pre_remove = eth_pre_remove,
546 .priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
547 .per_device_auto_alloc_size = sizeof(struct eth_device_priv),
548 .flags = DM_UC_FLAG_SEQ_ALIAS,
549 };