3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * Author: Igor Lisitsin <igor@emcraft.com>
7 * See file CREDITS for list of people who contributed to this
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 * The Ethernet Media Access Controllers (EMAC) are tested in the
32 * internal loopback mode.
33 * The controllers are configured accordingly and several packets
34 * are transmitted. The configurable test parameters are:
35 * MIN_PACKET_LENGTH - minimum size of packet to transmit
36 * MAX_PACKET_LENGTH - maximum size of packet to transmit
37 * TEST_NUM - number of tests
44 #if CONFIG_POST & CFG_POST_ETHER
46 #include <asm/cache.h>
48 #include <asm/processor.h>
50 #include <ppc4xx_enet.h>
53 DECLARE_GLOBAL_DATA_PTR
;
55 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
56 #define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
59 #define MIN_PACKET_LENGTH 64
60 #define MAX_PACKET_LENGTH 256
63 static volatile mal_desc_t tx __cacheline_aligned
;
64 static volatile mal_desc_t rx __cacheline_aligned
;
68 static void ether_post_init (int devnum
, int hw_addr
)
72 #if defined(CONFIG_440GX) || \
73 defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
74 defined(CONFIG_440SP) || defined(CONFIG_440SPE)
77 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
81 #if defined(CONFIG_440GX) || \
82 defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
83 defined(CONFIG_440SP) || defined(CONFIG_440SPE)
84 /* Need to get the OPB frequency so we can access the PHY */
85 get_sys_info (&sysinfo
);
88 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
89 /* provide clocks for EMAC internal loopback */
91 mfr
|= SDR0_MFR_ETH_CLK_SEL_V(devnum
);
96 out32 (EMAC_M0
+ hw_addr
, EMAC_M0_SRST
);
100 if (!(in32 (EMAC_M0
+ hw_addr
) & EMAC_M0_SRST
))
103 printf ("Timeout resetting EMAC\n");
108 #if defined(CONFIG_440GX) || \
109 defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
110 defined(CONFIG_440SP) || defined(CONFIG_440SPE)
111 /* Whack the M1 register */
113 if (sysinfo
.freqOPB
<= 50000000);
114 else if (sysinfo
.freqOPB
<= 66666667)
115 mode_reg
|= EMAC_M1_OBCI_66
;
116 else if (sysinfo
.freqOPB
<= 83333333)
117 mode_reg
|= EMAC_M1_OBCI_83
;
118 else if (sysinfo
.freqOPB
<= 100000000)
119 mode_reg
|= EMAC_M1_OBCI_100
;
121 mode_reg
|= EMAC_M1_OBCI_GT100
;
123 out32 (EMAC_M1
+ hw_addr
, mode_reg
);
125 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
127 /* set the Mal configuration reg */
128 #if defined(CONFIG_440GX) || \
129 defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
130 defined(CONFIG_440SP) || defined(CONFIG_440SPE)
131 mtdcr (malmcr
, MAL_CR_PLBB
| MAL_CR_OPBBL
| MAL_CR_LEA
|
132 MAL_CR_PLBLT_DEFAULT
| 0x00330000);
134 mtdcr (malmcr
, MAL_CR_PLBB
| MAL_CR_OPBBL
| MAL_CR_LEA
| MAL_CR_PLBLT_DEFAULT
);
135 /* Errata 1.12: MAL_1 -- Disable MAL bursting */
136 if (get_pvr() == PVR_440GP_RB
) {
137 mtdcr (malmcr
, mfdcr(malmcr
) & ~MAL_CR_PLBB
);
140 /* setup buffer descriptors */
141 tx
.ctrl
= MAL_TX_CTRL_WRAP
;
143 tx
.data_ptr
= (char*)L1_CACHE_ALIGN((u32
)tx_buf
);
145 rx
.ctrl
= MAL_TX_CTRL_WRAP
| MAL_RX_CTRL_EMPTY
;
147 rx
.data_ptr
= (char*)L1_CACHE_ALIGN((u32
)rx_buf
);
151 /* setup MAL tx & rx channel pointers */
152 #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
153 mtdcr (maltxctp2r
, &tx
);
155 mtdcr (maltxctp1r
, &tx
);
157 #if defined(CONFIG_440)
158 mtdcr (maltxbattr
, 0x0);
159 mtdcr (malrxbattr
, 0x0);
161 mtdcr (malrxctp1r
, &rx
);
162 /* set RX buffer size */
163 mtdcr (malrcbs1
, PKTSIZE_ALIGN
/ 16);
167 /* setup MAL tx & rx channel pointers */
168 #if defined(CONFIG_440)
169 mtdcr (maltxbattr
, 0x0);
170 mtdcr (malrxbattr
, 0x0);
172 mtdcr (maltxctp0r
, &tx
);
173 mtdcr (malrxctp0r
, &rx
);
174 /* set RX buffer size */
175 mtdcr (malrcbs0
, PKTSIZE_ALIGN
/ 16);
179 /* Enable MAL transmit and receive channels */
180 #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
181 mtdcr (maltxcasr
, (MAL_TXRX_CASR
>> (devnum
*2)));
183 mtdcr (maltxcasr
, (MAL_TXRX_CASR
>> devnum
));
185 mtdcr (malrxcasr
, (MAL_TXRX_CASR
>> devnum
));
187 /* set internal loopback mode */
188 out32 (EMAC_M1
+ hw_addr
, EMAC_M1_FDE
| EMAC_M1_ILE
|
189 EMAC_M1_RFS_4K
| EMAC_M1_TX_FIFO_2K
|
190 EMAC_M1_MF_100MBPS
| EMAC_M1_IST
|
193 /* set transmit enable & receive enable */
194 out32 (EMAC_M0
+ hw_addr
, EMAC_M0_TXE
| EMAC_M0_RXE
);
196 /* enable broadcast address */
197 out32 (EMAC_RXM
+ hw_addr
, EMAC_RMR_BAE
);
199 /* set transmit request threshold register */
200 out32 (EMAC_TRTR
+ hw_addr
, 0x18000000); /* 256 byte threshold */
202 /* set receive low/high water mark register */
203 #if defined(CONFIG_440)
204 /* 440s has a 64 byte burst length */
205 out32 (EMAC_RX_HI_LO_WMARK
+ hw_addr
, 0x80009000);
207 /* 405s have a 16 byte burst length */
208 out32 (EMAC_RX_HI_LO_WMARK
+ hw_addr
, 0x0f002000);
209 #endif /* defined(CONFIG_440) */
210 out32 (EMAC_TXM1
+ hw_addr
, 0xf8640000);
212 /* Set fifo limit entry in tx mode 0 */
213 out32 (EMAC_TXM0
+ hw_addr
, 0x00000003);
215 out32 (EMAC_I_FRAME_GAP_REG
+ hw_addr
, 0x00000008);
219 static void ether_post_halt (int devnum
, int hw_addr
)
222 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
226 /* 1st reset MAL channel */
227 /* Note: writing a 0 to a channel has no effect */
228 #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
229 mtdcr (maltxcarr
, MAL_TXRX_CASR
>> (devnum
* 2));
231 mtdcr (maltxcarr
, MAL_TXRX_CASR
>> devnum
);
233 mtdcr (malrxcarr
, MAL_TXRX_CASR
>> devnum
);
236 while (mfdcr (malrxcasr
) & (MAL_TXRX_CASR
>> devnum
)) {
242 out32 (EMAC_M0
+ hw_addr
, EMAC_M0_SRST
);
244 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
245 /* remove clocks for EMAC internal loopback */
246 mfsdr (sdr_mfr
, mfr
);
247 mfr
&= ~SDR0_MFR_ETH_CLK_SEL_V(devnum
);
248 mtsdr (sdr_mfr
, mfr
);
252 static void ether_post_send (int devnum
, int hw_addr
, void *packet
, int length
)
256 while (tx
.ctrl
& MAL_TX_CTRL_READY
) {
258 printf ("TX timeout\n");
263 tx
.ctrl
= MAL_TX_CTRL_READY
| MAL_TX_CTRL_WRAP
| MAL_TX_CTRL_LAST
|
264 EMAC_TX_CTRL_GFCS
| EMAC_TX_CTRL_GP
;
265 tx
.data_len
= length
;
266 memcpy (tx
.data_ptr
, packet
, length
);
269 out32 (EMAC_TXM0
+ hw_addr
, in32 (EMAC_TXM0
+ hw_addr
) | EMAC_TXM0_GNP0
);
273 static int ether_post_recv (int devnum
, int hw_addr
, void *packet
, int max_length
)
278 while (rx
.ctrl
& MAL_RX_CTRL_EMPTY
) {
280 printf ("RX timeout\n");
285 length
= rx
.data_len
- 4;
286 if (length
<= max_length
)
287 memcpy(packet
, rx
.data_ptr
, length
);
290 rx
.ctrl
|= MAL_RX_CTRL_EMPTY
;
300 static void packet_fill (char *packet
, int length
)
302 char c
= (char) length
;
305 /* set up ethernet header */
306 memset (packet
, 0xff, 14);
308 for (i
= 14; i
< length
; i
++) {
313 static int packet_check (char *packet
, int length
)
315 char c
= (char) length
;
318 for (i
= 14; i
< length
; i
++) {
319 if (packet
[i
] != c
++)
326 static int test_ctlr (int devnum
, int hw_addr
)
329 char packet_send
[MAX_PACKET_LENGTH
];
330 char packet_recv
[MAX_PACKET_LENGTH
];
335 ether_post_init (devnum
, hw_addr
);
337 for (i
= 0; i
< TEST_NUM
; i
++) {
338 for (l
= MIN_PACKET_LENGTH
; l
<= MAX_PACKET_LENGTH
; l
++) {
339 packet_fill (packet_send
, l
);
341 ether_post_send (devnum
, hw_addr
, packet_send
, l
);
343 length
= ether_post_recv (devnum
, hw_addr
, packet_recv
,
344 sizeof (packet_recv
));
346 if (length
!= l
|| packet_check (packet_recv
, length
) < 0) {
356 ether_post_halt (devnum
, hw_addr
);
359 post_log ("EMAC%d test failed\n", devnum
);
365 int ether_post_test (int flags
)
369 /* Allocate tx & rx packet buffers */
370 tx_buf
= malloc (PKTSIZE_ALIGN
+ CFG_CACHELINE_SIZE
);
371 rx_buf
= malloc (PKTSIZE_ALIGN
+ CFG_CACHELINE_SIZE
);
373 if (!tx_buf
|| !rx_buf
) {
374 printf ("Failed to allocate packet buffers\n");
380 if (test_ctlr (0, 0))
384 if (test_ctlr (1, 0x100))
394 #endif /* CONFIG_POST & CFG_POST_ETHER */
395 #endif /* CONFIG_POST */