config: remove platform CONFIG_SYS_HZ definition part 2/2

[people/ms/u-boot.git] / include / configs / cpuat91.h

diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index cfaef15cbd6ebb850de378cb8df61d692add5c15..3572ac57f80a72c28fad28dadb568db37cc32565 100644 (file)
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -4,23 +4,7 @@
  *
  * Configuration settings for the CPUAT91 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_CPUAT91_H
@@ -37,22 +21,22 @@
 #endif
 
 #define AT91C_XTAL_CLOCK               18432000
+#define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 #define AT91C_MAIN_CLOCK               ((AT91C_XTAL_CLOCK / 4) * 39)
 #define AT91C_MASTER_CLOCK             (AT91C_MAIN_CLOCK / 3)
 #define CONFIG_SYS_HZ_CLOCK            (AT91C_MASTER_CLOCK / 2)
-#define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_ARM920T
 #define CONFIG_AT91RM9200
 #define CONFIG_CPUAT91
-#define CONFIG_AT91FAMILY
-
-#undef CONFIG_USE_IRQ
 #define USE_920T_MMU
 
+#include <asm/hardware.h>      /* needed for port definitions */
+
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
+#define CONFIG_BOARD_EARLY_INIT_F
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR
@@ -86,12 +70,11 @@
 #define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE      ATMEL_BASE_DBGU
+#define CONFIG_USART_ID                0/* ignored in arm */
 
 #undef CONFIG_HARD_I2C
-#undef CONFIG_SOFT_I2C
 #define AT91_PIN_SDA                   (1<<25)
 #define AT91_PIN_SCL                   (1<<26)
 
@@ -138,7 +121,7 @@
 #undef CONFIG_CMD_NFS
 #undef CONFIG_CMD_DHCP
 
-#ifdef CONFIG_SOFT_I2C
+#ifdef CONFIG_SYS_I2C_SOFT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 #endif
@@ -151,7 +134,6 @@
 #define CONFIG_SYS_MEMTEST_END                 \
        (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_DRIVER_AT91EMAC
 #define CONFIG_SYS_RX_ETH_BUFFER       16
 #define CONFIG_RMII
@@ -196,7 +178,6 @@
 #define CONFIG_SYS_LOAD_ADDR           0x21000000
 
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 115200, 57600, 38400, 19200, 9600 }
 
 #define CONFIG_SYS_PROMPT              "CPUAT91=> "
 #define CONFIG_SYS_CBSIZE              256
@@ -211,15 +192,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \
                                GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_STACKSIZE               (32 * 1024)
-#define CONFIG_STACKSIZE_IRQ           (4 * 1024)
-#define CONFIG_STACKSIZE_FIQ           (4 * 1024)
-
-
-#if defined(CONFIG_USE_IRQ)
-#error CONFIG_USE_IRQ not supported
-#endif
-
 #define CONFIG_DEVICE_NULLDEV
 #define CONFIG_SILENT_CONSOLE