config: remove platform CONFIG_SYS_HZ definition part 2/2

[people/ms/u-boot.git] / include / configs / mpc8308_p1m.h

diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index 806ed6400e3ad9185fc3ba914e21cac2bf42c7d3..de7a53a8c22b5fe6454c23f1587b0376c9f66905 100644 (file)
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -3,23 +3,7 @@
  * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
  *
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -30,6 +14,7 @@
  */
 #define CONFIG_E300            1 /* E300 family */
 #define CONFIG_MPC83xx         1 /* MPC83xx family */
+#define CONFIG_MPC830x         1 /* MPC830x family */
 #define CONFIG_MPC8308         1 /* MPC8308 CPU specific */
 #define CONFIG_MPC8308_P1M     1 /* mpc8308_p1m board specific */
 
@@ -326,13 +311,14 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED   400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-#define CONFIG_SYS_I2C_OFFSET  0x3000
-#define CONFIG_SYS_I2C2_OFFSET 0x3100
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 
 /*
  * General PCI
@@ -352,6 +338,7 @@
 #define CONFIG_SYS_SCCR_PCIEXP1CM      1
 
 #define CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE
 
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
@@ -425,7 +412,6 @@
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 
@@ -434,7 +420,6 @@
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -506,9 +491,6 @@
 
 #define CONFIG_BOOTDELAY       5       /* -1 disables auto-boot */
 
-#define xstr(s)        str(s)
-#define str(s) #s
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "consoledev=ttyS0\0"                                            \
@@ -542,10 +524,10 @@
                "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
        "bootcmd=run flash_self\0"                                      \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
-       "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)             \
-               " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)      \
+       "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
+               " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
                " +${filesize};cp.b ${fileaddr} "                       \
-               xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"          \
+               __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
        "upd=run load update\0"                                         \
 
 #endif /* __CONFIG_H */