config: remove platform CONFIG_SYS_HZ definition part 2/2

[people/ms/u-boot.git] / include / configs / utx8245.h

diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 1e59ef37a2994ce903f133f511d008a1f84c847e..8e6e246460cddfc7d02386f7ff41566b4027f1ca 100644 (file)
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -7,23 +7,7 @@
  * Matthew E. Karger, karger@arlut.utexas.edu
  * Applied Research Laboratories, The University of Texas at Austin
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -58,7 +42,6 @@
 
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                57600
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY       2
 #define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
@@ -66,7 +49,6 @@
 #define CONFIG_BOOTARGS                "root=/dev/ram console=ttyS0,57600" /* RAMdisk */
 #define CONFIG_ETHADDR         00:AA:00:14:00:05       /* UTX5 */
 #define CONFIG_SERVERIP                10.8.17.105     /* Spree */
-#define CONFIG_SYS_TFTP_LOADADDR       10000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "kernel_addr=FFA00000\0" \
@@ -125,7 +107,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "                   /* Monitor Command Prompt       */
 #define CONFIG_SYS_CBSIZE      256                             /* Console I/O Buffer Size      */
 
 /* Print Buffer Size */
@@ -141,6 +122,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *-----------------------------------------------------------------------
  */
 #define CONFIG_PCI                             /* include pci support          */
+#define        CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
 #undef CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_EEPRO100
@@ -226,7 +208,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CONFIG_SYS_HZ                          1000
 
 /*#define CONFIG_SYS_ETH_DEV_FN             0x7800 */
 /*#define CONFIG_SYS_ETH_IOBASE             0x00104000 */
@@ -236,8 +217,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
  *------------------------------------------------------------------*/
 #if 1
 #define CONFIG_HARD_I2C                1               /* To enable I2C support        */
-#undef  CONFIG_SOFT_I2C                                /* I2C bit-banged               */
-#define CONFIG_SYS_I2C_SPEED           400000          /* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SPEED           400000
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 #endif