2 ###############################################################################
4 # IPFire.org - A linux based firewall #
5 # Copyright (C) 2007-2016 IPFire Team <info@ipfire.org> #
7 # This program is free software: you can redistribute it and/or modify #
8 # it under the terms of the GNU General Public License as published by #
9 # the Free Software Foundation, either version 3 of the License, or #
10 # (at your option) any later version. #
12 # This program is distributed in the hope that it will be useful, #
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of #
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
15 # GNU General Public License for more details. #
17 # You should have received a copy of the GNU General Public License #
18 # along with this program. If not, see <http://www.gnu.org/licenses/>. #
20 ###############################################################################
21 ###############################################################################
23 # Beautifying variables & presentation & input output interface
25 ###############################################################################
28 # Find current screen size
29 if [ -z "${COLUMNS}" ]; then
31 COLUMNS
=${COLUMNS##* }
34 # When using remote connections, such as a serial port, stty size returns 0
35 if [ "${COLUMNS}" = "0" ]; then
39 ## Measurements for positioning result messages
44 RESULT_COL
=$
((${COLUMNS} - $RESULT_WIDTH - 4))
45 TIME_COL
=$
((${RESULT_COL} - $TIME_WIDTH - 5))
46 OPT_COL
=$
((${TIME_COL} - $OPT_WIDTH - 5))
47 VER_COL
=$
((${OPT_COL} - $VER_WIDTH - 5))
49 ## Set Cursur Position Commands, used via echo -e
50 SET_RESULT_COL
="\\033[${RESULT_COL}G"
51 SET_TIME_COL
="\\033[${TIME_COL}G"
52 SET_OPT_COL
="\\033[${OPT_COL}G"
53 SET_VER_COL
="\\033[${VER_COL}G"
55 # Define color for messages
66 while read -r key val unit
; do
70 echo "$(( ${val} / 1024 ))"
78 local build_arch
="${1}"
80 if [ "${build_arch}" = "default" ]; then
81 build_arch
="$(configure_build_guess)"
84 case "${build_arch}" in
86 BUILDTARGET
="${build_arch}-unknown-linux-gnu"
87 CROSSTARGET
="${build_arch}-cross-linux-gnu"
89 CFLAGS_ARCH
="-m64 -mtune=generic"
93 BUILDTARGET
="${build_arch}-pc-linux-gnu"
94 CROSSTARGET
="${build_arch}-cross-linux-gnu"
96 CFLAGS_ARCH
="-march=i586 -mtune=generic -fomit-frame-pointer"
100 BUILDTARGET
="${build_arch}-unknown-linux-gnu"
101 CROSSTARGET
="${build_arch}-cross-linux-gnu"
107 BUILDTARGET
="${build_arch}-unknown-linux-gnueabi"
108 CROSSTARGET
="${build_arch}-cross-linux-gnueabi"
110 CFLAGS_ARCH
="-march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard"
114 BUILDTARGET
="${build_arch}-unknown-linux-gnueabi"
115 CROSSTARGET
="${build_arch}-cross-linux-gnueabi"
117 CFLAGS_ARCH
="-march=armv5te -mfloat-abi=soft -fomit-frame-pointer"
121 exiterror
"Cannot build for architure ${build_arch}"
125 # Check if the QEMU helper is available if needed.
126 if qemu_is_required
"${build_arch}"; then
127 local qemu_build_helper
="$(qemu_find_build_helper_name "${build_arch}")"
129 if [ -n "${qemu_build_helper}" ]; then
130 QEMU_TARGET_HELPER
="${qemu_build_helper}"
132 exiterror
"Could not find a binfmt_misc helper entry for ${build_arch}"
136 BUILD_ARCH
="${build_arch}"
139 HARDENING_CFLAGS
="-Wp,-D_FORTIFY_SOURCE=2 -fstack-protector-strong --param=ssp-buffer-size=4"
141 CFLAGS
="-O2 -pipe -Wall -fexceptions -fPIC ${CFLAGS_ARCH}"
145 configure_build_guess
() {
146 case "${HOST_ARCH}" in
164 exiterror
"Cannot guess build architecture"
170 if [ "$?" -eq "0" ]; then
171 beautify message DONE
175 beautify message FAIL
177 if [ $EXITCODE -ne "0" ]; then
185 # ARG1=starting position on screen
186 # ARG2=string to be printed
187 # ARG3=offset, negative for left movement, positive for right movement, relative to ARG1
188 # For example if your starting position is column 50 and you want to print Hello three columns to the right
189 # of your starting position, your call will look like this:
190 # position_cursor 50 "Hello" 3 (you'll get the string Hello at position 53 (= 50 + 3)
191 # If on the other hand you want your string "Hello" to end three columns to the left of position 50,
192 # your call will look like this:
193 # position_cursor 50 "Hello" -3 (you'll get the string Hello at position 42 (= 50 - 5 -3)
194 # If you want to start printing at the exact starting location, use offset 0
200 STRING_LENGTH
=${#STRING}
202 if [ ${OFFSET} -lt 0 ]; then
203 COL
=$
((${START} + ${OFFSET} - ${STRING_LENGTH}))
205 COL
=$
((${START} + ${OFFSET}))
208 SET_COL
="\\033[${COL}G"
211 } # End of position_cursor()
216 # Commands: build_stage, make_pkg, message, result
221 echo -ne "${SET_RESULT_COL}[${DONE} DONE ${NORMAL}]\n"
224 echo -ne "${WARN}${3}${NORMAL}${SET_RESULT_COL}[${WARN} WARN ${NORMAL}]\n"
227 echo -ne "${SET_RESULT_COL}[${FAIL} FAIL ${NORMAL}]\n"
230 echo -ne "${SET_RESULT_COL}[${SKIP} SKIP ${NORMAL}]\n"
236 if [ "$STAGE_TIME_START" ]; then
237 LAST_STAGE_TIME
=$
[ `date +%s` - $STAGE_TIME_START ]
239 STAGE_TIME_START
=`date +%s`
240 echo -ne "${BOLD}*** (${BUILD_ARCH}) ${MESSAGE}${NORMAL}"
241 if [ "$LAST_STAGE_TIME" ]; then
242 echo -ne "${DONE} (Last stage took $LAST_STAGE_TIME secs)${NORMAL}\n"
244 echo -ne "${BOLD}${SET_VER_COL} version${SET_OPT_COL} options${SET_TIME_COL} time (sec)${SET_RESULT_COL} status${NORMAL}\n"
247 BUILD_TIME_START
=`date +%s`
250 BUILD_TIME_END
=`date +%s`
251 seconds
=$
[ $BUILD_TIME_END - $BUILD_TIME_START ]
252 hours
=$
((seconds
/ 3600))
253 seconds
=$
((seconds
% 3600))
254 minutes
=$
((seconds
/ 60))
255 seconds
=$
((seconds
% 60))
257 echo -ne "${DONE}***Build is finished now and took $hours hour(s) $minutes minute(s) $seconds second(s)!${NORMAL}\n"
260 echo "$2" |
while read PKG_VER PROGRAM OPTIONS
262 SET_VER_COL_REAL
=`position_cursor $OPT_COL $PKG_VER -3`
264 if [ "$OPTIONS" == "" ]; then
265 echo -ne "${PROGRAM}${SET_VER_COL}[ ${BOLD}${SET_VER_COL_REAL}${PKG_VER}"
266 echo -ne "${NORMAL} ]${SET_RESULT_COL}"
268 echo -ne "${PROGRAM}${SET_VER_COL}[ ${BOLD}${SET_VER_COL_REAL}${PKG_VER}"
269 echo -ne "${NORMAL} ]${SET_OPT_COL}[ ${BOLD}${OPTIONS}"
270 echo -ne "${NORMAL} ]${SET_RESULT_COL}"
283 SET_TIME_COL_REAL
=`position_cursor $RESULT_COL $PKG_TIME -3`
286 echo -ne "${SET_TIME_COL}[ ${BOLD}${SET_TIME_COL_REAL}$PKG_TIME${NORMAL} ]"
287 echo -ne "${SET_RESULT_COL}[${DONE} DONE ${NORMAL}]\n"
290 echo -ne "${SET_TIME_COL}[ ${BOLD}${SET_TIME_COL_REAL}$PKG_TIME${NORMAL} ]"
291 echo -ne "${SET_RESULT_COL}[${FAIL} FAIL ${NORMAL}]\n"
294 echo -ne "${SET_RESULT_COL}[${SKIP} SKIP ${NORMAL}]\n"
299 } # End of beautify()
304 PKG_VER
=`grep -E "^VER |^VER=|^VER " $1 | awk '{print $3}'`
306 if [ -z $PKG_VER ]; then
307 PKG_VER
=`grep "Exp " $1 | awk '{print $4}'`
309 if [ -z $PKG_VER ]; then
312 if [ ${#PKG_VER} -gt $VER_WIDTH ]; then
313 # If a package version number is greater than $VER_WIDTH, we keep the first 4 characters
314 # and replace enough characters to fit the resulting string on the screen. We'll replace
315 # the extra character with .. (two dots). That's why the "+ 2" in the formula below.
316 # Example: if we have a 21-long version number that we want to fit into a 10-long space,
317 # we have to remove 11 characters. But if we replace 11 characters with 2 characters, we'll
318 # end up with a 12-character long string. That's why we replace 12 characters with ..
319 REMOVE
=`expr substr "$PKG_VER" 4 $[ ${#PKG_VER} - $VER_WIDTH + 2 ]`
320 PKG_VER
=`echo ${PKG_VER/$REMOVE/..}`
324 } # End of get_pkg_ver()
328 umount
$BASEDIR/build
/sys
2>/dev
/null
;
329 umount
$BASEDIR/build
/dev
/shm
2>/dev
/null
;
330 umount
$BASEDIR/build
/dev
/pts
2>/dev
/null
;
331 umount
$BASEDIR/build
/dev
2>/dev
/null
;
332 umount
$BASEDIR/build
/proc
2>/dev
/null
;
333 umount
$BASEDIR/build
/install
/mnt
2>/dev
/null
;
334 umount
$BASEDIR/build
/usr
/src
/cache
2>/dev
/null
;
335 umount
$BASEDIR/build
/usr
/src
/ccache
2>/dev
/null
;
336 umount
$BASEDIR/build
/usr
/src
/config
2>/dev
/null
;
337 umount
$BASEDIR/build
/usr
/src
/doc
2>/dev
/null
;
338 umount
$BASEDIR/build
/usr
/src
/html
2>/dev
/null
;
339 umount
$BASEDIR/build
/usr
/src
/langs
2>/dev
/null
;
340 umount
$BASEDIR/build
/usr
/src
/lfs
2>/dev
/null
;
341 umount
$BASEDIR/build
/usr
/src
/log
2>/dev
/null
;
342 umount
$BASEDIR/build
/usr
/src
/src
2>/dev
/null
;
347 for i
in `seq 0 7`; do
348 if ( losetup
/dev
/loop
${i} 2>/dev
/null |
grep -q "/install/images" ); then
349 losetup
-d /dev
/loop
${i} 2>/dev
/null
353 if [ -n "${LOGFILE}" ]; then
357 while read -r line
; do
359 done <<< "$(tail -n30 ${LOGFILE})"
362 echo -e "\nERROR: $*"
363 echo " Check $LOGFILE for errors if applicable"
368 [ -e "${BASEDIR}/build/tools/lib/libpakfire_preload.so" ] ||
return
370 local env
="LD_PRELOAD=/tools/lib/libpakfire_preload.so"
372 # Fake kernel version, because some of the packages do not compile
373 # with kernel 3.0 and later.
374 env
="${env} UTS_RELEASE=${KVER}"
376 # Fake machine version.
377 env
="${env} UTS_MACHINE=${BUILD_ARCH}"
385 # Don't add anything if qemu is not used.
386 if ! qemu_is_required
; then
390 # Set default qemu options
391 case "${BUILD_ARCH}" in
393 QEMU_CPU
="${QEMU_CPU:-cortex-a9}"
395 env
="${env} QEMU_CPU=${QEMU_CPU}"
400 #env="${env} QEMU_STRACE=1"
406 local build_arch
="${1}"
408 if [ -z "${build_arch}" ]; then
409 build_arch
="${BUILD_ARCH}"
412 case "${HOST_ARCH},${build_arch}" in
413 x86_64
,arm
*|i?
86,arm
*|i?
86,x86_64
)
422 qemu_install_helper
() {
423 # Do nothing, if qemu is not required
424 if ! qemu_is_required
; then
428 if [ ! -e /proc
/sys
/fs
/binfmt_misc
/status
]; then
429 exiterror
"binfmt_misc not mounted. QEMU_TARGET_HELPER not useable."
432 if [ ! $
(cat /proc
/sys
/fs
/binfmt_misc
/status
) = 'enabled' ]; then
433 exiterror
"binfmt_misc not enabled. QEMU_TARGET_HELPER not useable."
437 if [ -z "${QEMU_TARGET_HELPER}" ]; then
438 exiterror
"QEMU_TARGET_HELPER not set"
441 # Check if the helper is already installed.
442 if [ -x "${LFS}${QEMU_TARGET_HELPER}" ]; then
446 # Try to find a suitable binary that we can install
447 # to the build environment.
449 for file in "${QEMU_TARGET_HELPER}" "${QEMU_TARGET_HELPER}-static"; do
450 # file must exist and be executable.
451 [ -x "${file}" ] ||
continue
454 file_is_static
"${file}" ||
continue
456 local dirname="${LFS}$(dirname "${file}")"
457 mkdir
-p "${dirname}"
459 install -m 755 "${file}" "${LFS}${QEMU_TARGET_HELPER}"
463 exiterror
"Could not find a statically-linked QEMU emulator: ${QEMU_TARGET_HELPER}"
466 qemu_find_build_helper_name
() {
467 local build_arch
="${1}"
470 case "${build_arch}" in
472 magic
="7f454c4601010100000000000000000002002800"
475 magic
="7f454c4602010100000000000000000002003e00"
479 [ -z "${magic}" ] && return 1
482 for file in /proc
/sys
/fs
/binfmt_misc
/*; do
483 # skip write only register entry
484 [ $
(basename "${file}") = "register" ] && continue
485 # Search for the file with the correct magic value.
486 grep -qE "^magic ${magic}$" "${file}" ||
continue
488 local interpreter
="$(grep "^interpreter
" "${file}" | awk '{ print $2 }')"
490 [ -n "${interpreter}" ] ||
continue
491 [ "${interpreter:0:1}" = "/" ] ||
continue
492 [ -x "${interpreter}" ] ||
continue
494 echo "${interpreter}"
504 file ${file} 2>/dev
/null |
grep -q "statically linked"
508 # Install QEMU helper, if needed
511 local PATH
="/tools/ccache/bin:/bin:/usr/bin:/sbin:/usr/sbin:/tools/bin"
513 PATH
="${PATH}" chroot
${LFS} env
-i \
518 SYSTEM_RELEASE
="${SYSTEM_RELEASE}" \
519 PAKFIRE_CORE
="${PAKFIRE_CORE}" \
522 VERSION
="${VERSION}" \
525 CONFIG_ROOT
="${CONFIG_ROOT}" \
526 CFLAGS
="${CFLAGS} ${HARDENING_CFLAGS}" \
527 CXXFLAGS
="${CXXFLAGS} ${HARDENING_CFLAGS}" \
528 BUILDTARGET
="${BUILDTARGET}" \
529 CROSSTARGET
="${CROSSTARGET}" \
530 BUILD_ARCH
="${BUILD_ARCH}" \
531 BUILD_PLATFORM
="${BUILD_PLATFORM}" \
532 CCACHE_DIR
=/usr
/src
/ccache \
533 CCACHE_COMPRESS
="${CCACHE_COMPRESS}" \
534 CCACHE_COMPILERCHECK
="${CCACHE_COMPILERCHECK}" \
542 if [ ! -e $BASEDIR/build
/usr
/src
/lfs
/ ]; then
543 exiterror
"No such file or directory: $BASEDIR/build/usr/src/lfs/"
546 echo "Entering to a shell inside LFS chroot, go out with exit"
547 local PS1
="ipfire build chroot ($(uname -m)) \u:\w\$ "
549 if enterchroot bash
-i; then
552 beautify message FAIL
553 exiterror
"chroot error"
557 ############################################################################
559 # Necessary shell functions #
561 ############################################################################
563 # Common checking before entering the chroot and compilling
565 # Return:0 caller can continue
566 # :1 skip (nothing to do)
567 # or fail if no script file found
572 if [ ! -f $BASEDIR/lfs
/$1 ]; then
573 exiterror
"No such file or directory: $BASEDIR/$1"
576 local PKG_VER
=`get_pkg_ver $BASEDIR/lfs/$1`
577 beautify make_pkg
"$PKG_VER $*"
579 # Check if this package is supported by our architecture.
580 # If no SUP_ARCH is found, we assume the package can be built for all.
581 if grep "^SUP_ARCH" ${BASEDIR}/lfs
/${1} >/dev
/null
; then
582 # Check if package supports ${BUILD_ARCH} or all architectures.
583 if ! grep -E "^SUP_ARCH.*${BUILD_ARCH}|^SUP_ARCH.*all" ${BASEDIR}/lfs/${1} >/dev/null; then
591 for i in $SKIP_PACKAGE_LIST
593 if [ "$i" == "$1" ]; then
599 echo -ne "`date -u '+%b %e %T'`: Building $
* " >> $LOGFILE
601 cd $BASEDIR/lfs && make -s -f $* LFS_BASEDIR=$BASEDIR BUILD_ARCH="${BUILD_ARCH}" \
602 MESSAGE="$1\t " download >> $LOGFILE 2>&1
603 if [ $? -ne 0 ]; then
604 exiterror "Download error
in $1"
607 cd $BASEDIR/lfs && make -s -f $* LFS_BASEDIR=$BASEDIR BUILD_ARCH="${BUILD_ARCH}" \
608 MESSAGE="$1\t md5sum" md5 >> $LOGFILE 2>&1
609 if [ $? -ne 0 ]; then
610 exiterror "md5sum error
in $1, check
file in cache or signature
"
614 } # End of lfsmakecommoncheck()
617 lfsmakecommoncheck $*
618 [ $? == 1 ] && return 0
620 local PKG_TIME_START=`date +%s`
622 cd $BASEDIR/lfs && env -i \
623 PATH="/tools
/ccache
/bin
:/tools
/bin
:$PATH" \
624 CCACHE_DIR="${CCACHE_DIR}" \
625 CCACHE_COMPRESS="${CCACHE_COMPRESS}" \
626 CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
628 CXXFLAGS="${CXXFLAGS}" \
629 MAKETUNING="${MAKETUNING}" \
632 CROSSTARGET="${CROSSTARGET}" \
633 BUILDTARGET="${BUILDTARGET}" \
634 BUILD_ARCH="${BUILD_ARCH}" \
635 BUILD_PLATFORM="${BUILD_PLATFORM}" \
636 LFS_BASEDIR="${BASEDIR}" \
639 install >> $LOGFILE 2>&1
641 local COMPILE_SUCCESS=$?
642 local PKG_TIME_END=`date +%s`
644 if [ $COMPILE_SUCCESS -ne 0 ]; then
645 beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
646 exiterror "Building $
*";
648 beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
655 lfsmakecommoncheck $*
656 [ $? == 1 ] && return 0
658 local PKG_TIME_START=`date +%s`
662 bash -x -c "cd /usr
/src
/lfs
&& \
663 MAKETUNING
=${MAKETUNING} \
665 LFS_BASEDIR
=/usr
/src
install" \
668 local COMPILE_SUCCESS=$?
669 local PKG_TIME_END=`date +%s`
671 if [ $COMPILE_SUCCESS -ne 0 ]; then
672 beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
673 exiterror "Building $
*";
675 beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
682 lfsmakecommoncheck $*
683 [ $? == 1 ] && return 0
685 local PKG_TIME_START=`date +%s`
689 bash -x -c "cd /usr
/src
/lfs
&& make -f $
* LFS_BASEDIR
=/usr
/src dist
" \
692 local COMPILE_SUCCESS=$?
693 local PKG_TIME_END=`date +%s`
695 if [ $COMPILE_SUCCESS -ne 0 ]; then
696 beautify result FAIL $[ $PKG_TIME_END - $PKG_TIME_START ]
697 exiterror "Packaging $
*";
699 beautify result DONE $[ $PKG_TIME_END - $PKG_TIME_START ]
705 echo -ne "Checking the translations
for missing or obsolete
strings...
"
706 chmod 755 $BASEDIR/tools/{check_strings.pl,sort_strings.pl,check_langs.sh}
707 $BASEDIR/tools/sort_strings.pl en
708 $BASEDIR/tools/sort_strings.pl de
709 $BASEDIR/tools/sort_strings.pl fr
710 $BASEDIR/tools/sort_strings.pl es
711 $BASEDIR/tools/sort_strings.pl pl
712 $BASEDIR/tools/sort_strings.pl ru
713 $BASEDIR/tools/sort_strings.pl nl
714 $BASEDIR/tools/sort_strings.pl tr
715 $BASEDIR/tools/sort_strings.pl it
716 $BASEDIR/tools/check_strings.pl en > $BASEDIR/doc/language_issues.en
717 $BASEDIR/tools/check_strings.pl de > $BASEDIR/doc/language_issues.de
718 $BASEDIR/tools/check_strings.pl fr > $BASEDIR/doc/language_issues.fr
719 $BASEDIR/tools/check_strings.pl es > $BASEDIR/doc/language_issues.es
720 $BASEDIR/tools/check_strings.pl es > $BASEDIR/doc/language_issues.pl
721 $BASEDIR/tools/check_strings.pl ru > $BASEDIR/doc/language_issues.ru
722 $BASEDIR/tools/check_strings.pl nl > $BASEDIR/doc/language_issues.nl
723 $BASEDIR/tools/check_strings.pl tr > $BASEDIR/doc/language_issues.tr
724 $BASEDIR/tools/check_strings.pl it > $BASEDIR/doc/language_issues.it
725 $BASEDIR/tools/check_langs.sh > $BASEDIR/doc/language_missings
726 beautify message DONE
728 echo -ne "Updating language lists...
"
729 update_language_list ${BASEDIR}/src/installer/po
730 update_language_list ${BASEDIR}/src/setup/po
731 beautify message DONE
734 update_language_list() {
738 for lang in ${path}/*.po; do
739 lang="$
(basename "${lang}")"
741 done | sort -u > "${path}/LINGUAS
"